This is XeTeX, Version 3.1415926-2.5-0.9999.3 (TeX Live 2013/W32TeX) (format=xelatex 2013.9.10) 10 SEP 2013 21:56 entering extended mode restricted \write18 enabled. %&-line parsing enabled. **test.tex (./test.tex LaTeX2e <2011/06/27> Babel <3.9f> and hyphenation patterns for 78 languages loaded. (c:/texlive/2013/texmf-dist/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (c:/texlive/2013/texmf-dist/tex/latex/base/size10.clo File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count80 \c@section=\count81 \c@subsection=\count82 \c@subsubsection=\count83 \c@paragraph=\count84 \c@subparagraph=\count85 \c@figure=\count86 \c@table=\count87 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) (c:/texlive/2013/texmf-dist/tex/xelatex/ptext/ptext.sty Package: ptext 2013/04/28 v1.1 A package similar to the lipsum package for the Persian language with 100 paragraphs of the Shahnameh (c:/texlive/2013/texmf-dist/tex/latex/bidi/biditools.sty Package: biditools 2013/04/10 v0.2 Programming tools for bidi package ) \c@pte@count=\count88 ) (./simurgh.sty Package: simurgh 2013/12/01 v0.01a persian typesetting (c:/texlive/2013/texmf-dist/tex/latex/xkeyval/xkeyval.sty Package: xkeyval 2012/10/14 v2.6b package option processing (HA) (c:/texlive/2013/texmf-dist/tex/generic/xkeyval/xkeyval.tex \XKV@toks=\toks14 \XKV@tempa@toks=\toks15 \XKV@depth=\count89 File: xkeyval.tex 2012/10/14 v2.6b key=value parser (HA) (c:/texlive/2013/texmf-dist/tex/generic/xkeyval/keyval.tex))) (./simurgh-tools.sty Package: simurgh-tools 2013/12/01 v0.01a programming tools ) (./simurgh-chkeng.sty Package: simurgh-chkeng 2013/12/01 v0.01a check typesetting engine (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/ifluatex.sty Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. ) ! ******************************************** * lualatex is required to compile this document. * sorry! ********************************************. l.13 ...*****************************************} % This error message was generated by an \errmessage command, so I can't give any explicit help. Pretend that you're Hercule Poirot: Examine all clues, and deduce the truth by order and method. ) (./simurgh-shellescape.sty Package: simurgh-shellescape 2013/12/01 v0.01a shellescape (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO ) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/infwarerr.sty Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO) ) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/ltxcmds.sty Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO) ) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/ifpdf.sty Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in PDF mode is not detected. ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: pdfTeX >= 1.30 not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. Package pdftexcmds Info: \pdfdraftmode not found. )) (c:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec.sty Package: fontspec 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLaTeX (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/expl3.sty (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3names.sty (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3bootstrap.sty Package: l3bootstrap 2013/07/28 v4581 L3 Experimental bootstrap code ) Package: l3names 2012/12/07 v4346 L3 Namespace for primitives ) (c:/texlive/2013/texmf-dist/tex/latex/etex-pkg/etex.sty Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count90 ) Package: expl3 2013/07/28 v4582 L3 Experimental code bundle wrapper (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3basics.sty Package: l3basics 2013/07/28 v4581 L3 Basic definitions ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3expan.sty Package: l3expan 2013/07/24 v4565 L3 Argument expansion ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3tl.sty Package: l3tl 2013/07/28 v4581 L3 Token lists ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3seq.sty Package: l3seq 2013/07/28 v4581 L3 Sequences and stacks ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3int.sty Package: l3int 2013/07/28 v4581 L3 Integers \c_max_int=\count91 \l_tmpa_int=\count92 \l_tmpb_int=\count93 \g_tmpa_int=\count94 \g_tmpb_int=\count95 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3quark.sty Package: l3quark 2013/07/21 v4564 L3 Quarks ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3prg.sty Package: l3prg 2013/07/28 v4581 L3 Control structures \g__prg_map_int=\count96 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3clist.sty Package: l3clist 2013/07/28 v4581 L3 Comma separated lists ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3token.sty Package: l3token 2013/07/28 v4581 L3 Experimental token manipulation ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3prop.sty Package: l3prop 2013/07/28 v4581 L3 Property lists ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3msg.sty Package: l3msg 2013/07/28 v4581 L3 Messages ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3file.sty Package: l3file 2013/07/28 v4581 L3 File and I/O operations \l_iow_line_count_int=\count97 \l__iow_target_count_int=\count98 \l__iow_current_line_int=\count99 \l__iow_current_word_int=\count100 \l__iow_current_indentation_int=\count101 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3skip.sty Package: l3skip 2013/07/28 v4581 L3 Dimensions and skips \c_zero_dim=\dimen103 \c_max_dim=\dimen104 \l_tmpa_dim=\dimen105 \l_tmpb_dim=\dimen106 \g_tmpa_dim=\dimen107 \g_tmpb_dim=\dimen108 \c_zero_skip=\skip43 \c_max_skip=\skip44 \l_tmpa_skip=\skip45 \l_tmpb_skip=\skip46 \g_tmpa_skip=\skip47 \g_tmpb_skip=\skip48 \c_zero_muskip=\muskip10 \c_max_muskip=\muskip11 \l_tmpa_muskip=\muskip12 \l_tmpb_muskip=\muskip13 \g_tmpa_muskip=\muskip14 \g_tmpb_muskip=\muskip15 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3keys.sty Package: l3keys 2013/07/28 v4581 L3 Experimental key-value interfaces \g__keyval_level_int=\count102 \l_keys_choice_int=\count103 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3fp.sty Package: l3fp 2013/07/09 v4521 L3 Floating points \c__fp_leading_shift_int=\count104 \c__fp_middle_shift_int=\count105 \c__fp_trailing_shift_int=\count106 \c__fp_big_leading_shift_int=\count107 \c__fp_big_middle_shift_int=\count108 \c__fp_big_trailing_shift_int=\count109 \c__fp_Bigg_leading_shift_int=\count110 \c__fp_Bigg_middle_shift_int=\count111 \c__fp_Bigg_trailing_shift_int=\count112 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3box.sty Package: l3box 2013/07/28 v4581 L3 Experimental boxes \c_empty_box=\box26 \l_tmpa_box=\box27 \l_tmpb_box=\box28 \g_tmpa_box=\box29 \g_tmpb_box=\box30 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3coffins.sty Package: l3coffins 2012/09/09 v4212 L3 Coffin code layer \l__coffin_internal_box=\box31 \l__coffin_internal_dim=\dimen109 \l__coffin_offset_x_dim=\dimen110 \l__coffin_offset_y_dim=\dimen111 \l__coffin_x_dim=\dimen112 \l__coffin_y_dim=\dimen113 \l__coffin_x_prime_dim=\dimen114 \l__coffin_y_prime_dim=\dimen115 \c_empty_coffin=\box32 \l__coffin_aligned_coffin=\box33 \l__coffin_aligned_internal_coffin=\box34 \l_tmpa_coffin=\box35 \l_tmpb_coffin=\box36 \l__coffin_display_coffin=\box37 \l__coffin_display_coord_coffin=\box38 \l__coffin_display_pole_coffin=\box39 \l__coffin_display_offset_dim=\dimen116 \l__coffin_display_x_dim=\dimen117 \l__coffin_display_y_dim=\dimen118 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3color.sty Package: l3color 2012/08/29 v4156 L3 Experimental color support ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3luatex.sty Package: l3luatex 2013/07/28 v4581 L3 Experimental LuaTeX-specific functions \g__cctab_allocate_int=\count113 \g__cctab_stack_int=\count114 ) (c:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3candidates.sty Package: l3candidates 2013/07/24 v4576 L3 Experimental additions to l3kernel \l__box_top_dim=\dimen119 \l__box_bottom_dim=\dimen120 \l__box_left_dim=\dimen121 \l__box_right_dim=\dimen122 \l__box_top_new_dim=\dimen123 \l__box_bottom_new_dim=\dimen124 \l__box_left_new_dim=\dimen125 \l__box_right_new_dim=\dimen126 \l__box_internal_box=\box40 \l__coffin_bounding_shift_dim=\dimen127 \l__coffin_left_corner_dim=\dimen128 \l__coffin_right_corner_dim=\dimen129 \l__coffin_bottom_corner_dim=\dimen130 \l__coffin_top_corner_dim=\dimen131 \l__coffin_scaled_total_height_dim=\dimen132 \l__coffin_scaled_width_dim=\dimen133 )) (c:/texlive/2013/texmf-dist/tex/latex/l3packages/xparse/xparse.sty Package: xparse 2013/07/28 v4582 L3 Experimental document command parser \l__xparse_current_arg_int=\count115 \l__xparse_m_args_int=\count116 \l__xparse_mandatory_args_int=\count117 \l__xparse_processor_int=\count118 \l__xparse_v_nesting_int=\count119 ) \l_fontspec_script_int=\count120 \l_fontspec_language_int=\count121 \l_fontspec_strnum_int=\count122 \l_fontspec_tmpa_dim=\dimen134 \l_fontspec_tmpb_dim=\dimen135 \l_fontspec_tmpc_dim=\dimen136 Variant \tl_gset:cV already defined; not changing it on line 69 (c:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec-patches.sty Package: fontspec-patches 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLa TeX (c:/texlive/2013/texmf-dist/tex/latex/base/fixltx2e.sty Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX LaTeX Info: Redefining \em on input line 420. ) LaTeX Info: Redefining \em on input line 22. LaTeX Info: Redefining \emph on input line 30. LaTeX Info: Redefining \- on input line 33. ************************************************* * LaTeX warning: "xparse/redefine-command" * * Redefining document command \oldstylenums with arg. spec. 'm' on line 128. ************************************************* ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \liningnums with arg. spec. 'm' on line 132. ................................................. ) (c:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec-xetex.sty Package: fontspec-xetex 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLaTe X (c:/texlive/2013/texmf-dist/tex/latex/base/fontenc.sty Package: fontenc 2005/09/27 v1.99g Standard LaTeX package (c:/texlive/2013/texmf-dist/tex/latex/euenc/eu1enc.def File: eu1enc.def 2010/05/27 v0.1h Experimental Unicode font encodings ) LaTeX Font Info: Try loading font information for EU1+lmr on input line 100. (c:/texlive/2013/texmf-dist/tex/latex/euenc/eu1lmr.fd File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern )) (c:/texlive/2013/texmf-dist/tex/xelatex/xunicode/xunicode.sty File: xunicode.sty 2011/09/09 v0.981 provides access to latin accents and many other characters in Unicode lower plane (c:/texlive/2013/texmf-dist/tex/latex/tipa/t3enc.def File: t3enc.def 2001/12/31 T3 encoding LaTeX Font Info: Try loading font information for EU1+lmss on input line 357 . (c:/texlive/2013/texmf-dist/tex/latex/euenc/eu1lmss.fd File: eu1lmss.fd 2009/10/30 v1.6 Font defs for Latin Modern )) \tipaTiiicode=\count123 \tipasavetokens=\toks16 \tipachecktokens=\toks17 (c:/texlive/2013/texmf-dist/tex/latex/graphics/graphicx.sty Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) (c:/texlive/2013/texmf-dist/tex/latex/graphics/graphics.sty Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) (c:/texlive/2013/texmf-dist/tex/latex/graphics/trig.sty Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) (c:/texlive/2013/texmf-dist/tex/latex/latexconfig/graphics.cfg File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live ) Package graphics Info: Driver file: xetex.def on input line 91. (c:/texlive/2013/texmf-dist/tex/xelatex/xetex-def/xetex.def File: xetex.def 2013/04/29 v0.96 LaTeX color/graphics driver for XeTeX (RRM/JK) )) \Gin@req@height=\dimen137 \Gin@req@width=\dimen138 )) ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \fontspec with arg. spec. 'O{}m' on line 41. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmainfont with arg. spec. 'O{}m' on line 46. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsansfont with arg. spec. 'O{}m' on line 51. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmonofont with arg. spec. 'O{}m' on line 56. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathrm with arg. spec. 'O{}m' on line 65. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setboldmathrm with arg. spec. 'O{}m' on line 69. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsf with arg. spec. 'O{}m' on line 73. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathtt with arg. spec. 'O{}m' on line 77. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfamily with arg. spec. 'mO{}m' on line 96. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontface with arg. spec. 'mO{}m' on line 100. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defaultfontfeatures with arg. spec. 'om' on line . 108. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \addfontfeatures with arg. spec. 'm' on line 144. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfeature with arg. spec. 'mm' on line 156. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newAATfeature with arg. spec. 'mmmm' on line 164. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newICUfeature with arg. spec. 'mmm' on line 172. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeature with arg. spec. 'mm' on line . 201. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeatureoption with arg. spec. 'mmm' on . line 203. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontscript with arg. spec. 'mm' on line 208. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontlanguage with arg. spec. 'mm' on line 235. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \DeclareFontsExtensions with arg. spec. 'm' on . line 256. ................................................. Variant \prop_gput:cnV already defined; not changing it on line 582 Variant \prop_gput:cnx already defined; not changing it on line 583 \l_fontspec_tmp_int=\count124 LaTeX Info: Redefining \itshape on input line 2087. LaTeX Info: Redefining \slshape on input line 2092. LaTeX Info: Redefining \scshape on input line 2097. LaTeX Info: Redefining \upshape on input line 2102. (c:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec.cfg))) (./simurgh-fonts.sty Package: simurgh-fonts 2013/12/01 v0.01a fonts ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmainparsifont with arg. spec. 'O{}m' on line . 17. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmainlatinfont with arg. spec. 'O{}m' on line . 26. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \loadnewparsifont with arg. spec. 'mO{}m' on line . 37. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \loadnewlatinfont with arg. spec. 'mO{}m' on line . 46. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setparsisansfont with arg. spec. 'O{}m' on line . 80. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setparsimonofont with arg. spec. 'O{}m' on line . 84. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setnavarfont with arg. spec. 'O{}m' on line 88. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpookfont with arg. spec. 'O{}m' on line 92. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsayehfont with arg. spec. 'O{}m' on line 97. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setiranicfont with arg. spec. 'O{}m' on line 102. ................................................. \g__file_internal_ior=\read1 \g_fontspec_family_lmroman10-regular_int=\count125 ................................................. . fontspec info: "defining-font" . . Font family 'lmroman10-regular(0)' created for font 'lmroman10-regular' with . options . [Ligatures=TeX,ExternalLocation,BoldFont={lmroman10-bold},BoldItalicFont={lmr oman10-bolditalic},ItalicFont={lmroman10-italic},SmallCapsFont={lmromancaps10-r egular},SlantedFont={lmromanslant10-regular},BoldSlantedFont={lmromanslant10-bo ld}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"[lmroman10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold' with NFSS spec.: . <->"[lmroman10-bold]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'italic' with NFSS spec.: . <->"[lmroman10-italic]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'italic small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'sl/' with NFSS spec.: . . <->"[lmromanslant10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold italic' with NFSS spec.: . <->"[lmroman10-bolditalic]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold italic small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'sl/' with NFSS spec.: . <->"[lmromanslant10-bold]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" ................................................. ) (./simurgh-jalalical.sty Package: simurgh-jalalical 2013/12/01 v0.01a jalali calendar \simurgh@i=\count126 \simurgh@year=\count127 \simurgh@month=\count128 \simurgh@day=\count129 \simurgh@latini=\count130 \simurgh@jalalii=\count131 \simurgh@latinii=\count132 \simurgh@jalaliii=\count133 \simurgh@latiniii=\count134 \simurgh@jalaliiii=\count135 \simurgh@latiniv=\count136 \simurgh@jalaliiv=\count137 \simurgh@latinv=\count138 \simurgh@jalaliv=\count139 \simurgh@latinvi=\count140 \simurgh@jalalivi=\count141 \simurgh@latinvii=\count142 \simurgh@jalalivii=\count143 \simurgh@latinviii=\count144 \simurgh@jalaliviii=\count145 \simurgh@latinix=\count146 \simurgh@jalaliix=\count147 \simurgh@latinx=\count148 \simurgh@jalalix=\count149 \simurgh@latinxi=\count150 \simurgh@jalalixi=\count151 \simurgh@latinxii=\count152 \simurgh@jalalixii=\count153 \simurgh@jalalixiii=\count154 \simurgh@temp=\count155 \simurgh@temptwo=\count156 \simurgh@tempthree=\count157 \simurgh@yearModHundred=\count158 \simurgh@thirtytwo=\count159 \simurgh@dayn=\count160 \simurgh@sn=\count161 \simurgh@monthminusone=\count162 ) (./simurgh-mathdigitspec.sty Package: simurgh-mathdigitspec 2013/12/01 v0.01a unicode persian maths digits ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathbf with arg. spec. 'm' on line 93. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathit with arg. spec. 'm' on line 101. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathrm with arg. spec. 'm' on line 109. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathsf with arg. spec. 'm' on line 117. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathtt with arg. spec. 'm' on line 125. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsfparsidigitfont with arg. spec. 'O{}m' on . line 155. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathttparsidigitfont with arg. spec. 'O{}m' on . line 160. ................................................. ) (./simurgh-bidi.sty Package: simurgh-bidi 2013/12/01 v0.01a bidirectional typesetting ! Undefined control sequence. l.3 \directlua { tex.enableprimitives('simurgh@',{'pagedir','bodydir','pardi... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.3 \directlua { t ex.enableprimitives('simurgh@',{'pagedir','bodydir','pardi... You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. Overfull \hbox (13.23999pt too wide) in paragraph at lines 3--26 []\EU1/lmr/m/n/10 tex.enableprimitives(’simurgh@’,’pagedir’,’bodydir’,’pardir’, ’textdir’,’mathdir’) [] Underfull \hbox (badness 10000) in paragraph at lines 3--26 [] ) (./simurgh-unibidi.sty Package: simurgh-unibidi 2013/12/01 v0.01a unicode bidi ! Undefined control sequence. l.3 \RequireLuaModule {simurgh-unibidi} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.3 \RequireLuaModule {s imurgh-unibidi} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ) (./simurgh-ltx.sty Package: simurgh-ltx 2013/12/01 v0.01a changes to `latex.ltx' (./simurgh-footnotes.sty Package: simurgh-footnotes 2013/12/01 v0.01a footnotes (c:/texlive/2013/texmf-dist/tex/latex/oberdiek/zref-abspage.sty Package: zref-abspage 2012/04/04 v2.24 Module abspage for zref (HO) (c:/texlive/2013/texmf-dist/tex/latex/oberdiek/zref-base.sty Package: zref-base 2012/04/04 v2.24 Module base for zref (HO) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/etexcmds.sty Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. )) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/kvdefinekeys.sty Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO) ) (c:/texlive/2013/texmf-dist/tex/latex/oberdiek/auxhook.sty Package: auxhook 2011/03/04 v1.3 Hooks for auxiliary files (HO) ) Package zref Info: New property list: main on input line 759. Package zref Info: New property: default on input line 760. Package zref Info: New property: page on input line 761. ) (c:/texlive/2013/texmf-dist/tex/generic/oberdiek/atbegshi.sty Package: atbegshi 2011/10/05 v1.16 At begin shipout hook (HO) ) \c@abspage=\count163 Package zref Info: New property: abspage on input line 62. ) \c@footdir@label=\count164 \footdir@toks=\toks18 )) (./simurgh-clss.sty Package: simurgh-clss 2013/12/01 v0.01a changes to classes (./simurgh-article.sty Package: simurgh-article 2013/12/01 v0.01a changes to `article.cls' )) (./simurgh-pkgs.sty Package: simurgh-pkgs 2013/12/01 v0.01a changes to packages ) (./simurgh-loader.sty Package: simurgh-loader 2013/12/01 v0.01a loading simurgh last ) ! Undefined control sequence. ...b \relax \@RTLtrue \simurgh@pagedir TRT\simurgh@bodydir TRT\si... l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.75 } You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. ...simurgh@pagedir TRT\simurgh@bodydir TRT\simurgh@pardir TRT\sim... l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. ...\simurgh@bodydir TRT\simurgh@pardir TRT\simurgh@textdir TRT\or... l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. ...\simurgh@pardir TRT\simurgh@textdir TRT\or \@RTLfalse \simurgh... l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. ...rgh@mathdir TRT\or \simurgh@mathdir TLT\fi l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \simurgh@unibidi@cs #1->\directlua {packagedata.typo_dir.#1} l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing $ inserted. $ l.75 } I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. LaTeX Font Info: External font `cmex10' loaded for size (Font) <7> on input line 75. LaTeX Font Info: External font `cmex10' loaded for size (Font) <5> on input line 75. ! Undefined control sequence. \simurgh@unibidi@cs #1->\directlua {packagedata.typo_dir.#1} l.75 } The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. { l.75 } A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Extra }, or forgotten $. \simurgh@unibidi@cs ...a {packagedata.typo_dir.#1} l.75 } I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. ) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! LaTeX error: "kernel/key-choice-unknown" ! ! Key 'fontspec/Numbers/Arabic' accepts only a fixed set of choices. ! ! See the LaTeX3 documentation for further information. ! ! For immediate help type H . !............................................... l.4 \setmainparsifont{XB Niloofar} |''''''''''''''''''''''''''''''''''''''''''''''' | The key 'fontspec/Numbers/Arabic' only accepts predefined values, and '' is | not one of these. |............................................... \g_fontspec_family_XB Niloofar_int=\count165 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! LaTeX error: "kernel/key-choice-unknown" ! ! Key 'fontspec/Numbers/Arabic' accepts only a fixed set of choices. ! ! See the LaTeX3 documentation for further information. ! ! For immediate help type H . !............................................... l.4 \setmainparsifont{XB Niloofar} |''''''''''''''''''''''''''''''''''''''''''''''' | The key 'fontspec/Numbers/Arabic' only accepts predefined values, and '' is | not one of these. |............................................... !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! LaTeX error: "kernel/key-choice-unknown" ! ! Key 'fontspec/Numbers/Arabic' accepts only a fixed set of choices. ! ! See the LaTeX3 documentation for further information. ! ! For immediate help type H . !............................................... l.4 \setmainparsifont{XB Niloofar} |''''''''''''''''''''''''''''''''''''''''''''''' | The key 'fontspec/Numbers/Arabic' only accepts predefined values, and '' is | not one of these. |............................................... !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! LaTeX error: "kernel/key-choice-unknown" ! ! Key 'fontspec/Numbers/Arabic' accepts only a fixed set of choices. ! ! See the LaTeX3 documentation for further information. ! ! For immediate help type H . !............................................... l.4 \setmainparsifont{XB Niloofar} |''''''''''''''''''''''''''''''''''''''''''''''' | The key 'fontspec/Numbers/Arabic' only accepts predefined values, and '' is | not one of these. |............................................... !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! LaTeX error: "kernel/key-choice-unknown" ! ! Key 'fontspec/Numbers/Arabic' accepts only a fixed set of choices. ! ! See the LaTeX3 documentation for further information. ! ! For immediate help type H . !............................................... l.4 \setmainparsifont{XB Niloofar} |''''''''''''''''''''''''''''''''''''''''''''''' | The key 'fontspec/Numbers/Arabic' only accepts predefined values, and '' is | not one of these. |............................................... ................................................. . fontspec info: "defining-font" . . Font family 'XBNiloofar(0)' created for font 'XB Niloofar' with options . [Script=Parsi,Numbers=Parsi,Language=Parsi,]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"XB Niloofar/ICU:script=arab;language=FAR;" . . * 'bold' with NFSS spec.: . <->"XB Niloofar/B/ICU:script=arab;language=FAR;" . . * 'italic' with NFSS spec.: . <->"XB Niloofar/I/ICU:script=arab;language=FAR;" . . * 'bold italic' with NFSS spec.: . <->"XB Niloofar/BI/ICU:script=arab;language=FAR;" ................................................. ................................................. . fontspec info: "defining-font" . . Font family 'XBNiloofar(1)' created for font 'XB Niloofar' with options []. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"XB Niloofar/ICU:script=latn;language=DFLT;" . . * 'bold' with NFSS spec.: . <->"XB Niloofar/B/ICU:script=latn;language=DFLT;" . . * 'italic' with NFSS spec.: . <->"XB Niloofar/I/ICU:script=latn;language=DFLT;" . . * 'bold italic' with NFSS spec.: . <->"XB Niloofar/BI/ICU:script=latn;language=DFLT;" ................................................. Package simurgh Info: definingthedefaultpersianmathsdigitsfontas'XB Niloofar' o n input line 5. ! LaTeX Error: Encoding scheme `EU2' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.5 \setmathparsidigitfont{XB Niloofar} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Encoding scheme `EU2' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.5 \setmathparsidigitfont{XB Niloofar} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Encoding scheme `EU2' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.5 \setmathparsidigitfont{XB Niloofar} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Encoding scheme `EU2' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.5 \setmathparsidigitfont{XB Niloofar} Your command was ignored. Type I to replace it with another command, or to continue without it. (./test.aux) \openout1 = `test.aux'. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for EU1/lmr/m/n on input line 8. LaTeX Font Info: ... okay on input line 8. LaTeX Font Info: Checking defaults for T3/cmr/m/n on input line 8. LaTeX Font Info: Try loading font information for T3+cmr on input line 8. (c:/texlive/2013/texmf-dist/tex/latex/tipa/t3cmr.fd File: t3cmr.fd 2001/12/31 TIPA font definitions ) LaTeX Font Info: ... okay on input line 8. LaTeX Font Warning: Command \normalsize invalid in math mode on input line 8. ! Missing { inserted. d l.8 \begin{document} A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) \AtBeginShipoutBox=\box41 ! Missing \endgroup inserted. \endgroup l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing $ inserted. $ l.9 \maketitle I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. Overfull \hbox (277.79631pt too wide) in paragraph at lines 75--9 []\EU1/lmr/m/n/10 TRTTRTTRTTRTTLTpackagedata.typo$[]\OML/cmm/m/it/10 ir:set\OT1 /cmr/m/n/10 (0[])$ [] ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing number, treated as zero. { l.9 \maketitle A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.9 \maketitle Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing number, treated as zero. { l.9 \maketitle A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.9 \maketitle Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) Overfull \vbox (1051.04999pt too high) has occurred while \output is active [] ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) Missing character: There is no ی in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ک in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ن in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no و in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ش in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ت in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ه in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ن in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no م in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no و in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ن in font [lmroman17-regular]:mapping=tex-text! Missing character: There is no ه in font [lmroman17-regular]:mapping=tex-text! ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) LaTeX Font Info: External font `cmex10' loaded for size (Font) <12> on input line 9. LaTeX Font Info: External font `cmex10' loaded for size (Font) <8> on input line 9. LaTeX Font Info: External font `cmex10' loaded for size (Font) <6> on input line 9. ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! Missing { inserted. d l.9 \maketitle A left brace was mandatory here, so I've put one in. You might want to delete and/or insert some corrections so that I will find a matching right brace soon. (If you're confused by all this, try typing `I}' now.) ! LaTeX Error: Illegal character in array arg. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.9 \maketitle You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. \@array ...\@@par \fi \if@RTLtab \simurgh@textdir TRT\fi \@preamble l.9 \maketitle The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing } inserted. } l.9 \maketitle I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. Overfull \hbox (36.56pt too wide) has occurred while \output is active [] [] ! Missing # inserted in alignment preamble. \cr l.9 \maketitle There should be exactly one # between &'s, when an \halign or \valign is being set up. In this case you had none, so I've put one in; maybe that will work. ! Undefined control sequence.