This is XeTeX, Version 3.1415926-2.5-0.9999.3 (TeX Live 2013/W32TeX) (format=xelatex 2014.4.5) 17 APR 2014 19:07 entering extended mode \write18 enabled. %&-line parsing enabled. **harakat.tex (./harakat.tex LaTeX2e <2011/06/27> Babel <3.9f> and hyphenation patterns for 78 languages loaded. (f:/texlive/2013/texmf-dist/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (f:/texlive/2013/texmf-dist/tex/latex/base/size10.clo File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count80 \c@section=\count81 \c@subsection=\count82 \c@subsubsection=\count83 \c@paragraph=\count84 \c@subparagraph=\count85 \c@figure=\count86 \c@table=\count87 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) (f:/texlive/2013/texmf-dist/tex/latex/geometry/geometry.sty Package: geometry 2010/09/12 v5.6 Page Geometry (f:/texlive/2013/texmf-dist/tex/latex/graphics/keyval.sty Package: keyval 1999/03/16 v1.13 key=value parser (DPC) \KV@toks@=\toks14 ) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/ifpdf.sty Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in PDF mode is not detected. ) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/ifvtex.sty Package: ifvtex 2010/03/01 v1.5 Detect VTeX and its facilities (HO) Package ifvtex Info: VTeX not detected. ) (f:/texlive/2013/texmf-dist/tex/generic/ifxetex/ifxetex.sty Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional ) \Gm@cnth=\count88 \Gm@cntv=\count89 \c@Gm@tempcnt=\count90 \Gm@bindingoffset=\dimen103 \Gm@wd@mp=\dimen104 \Gm@odd@mp=\dimen105 \Gm@even@mp=\dimen106 \Gm@layoutwidth=\dimen107 \Gm@layoutheight=\dimen108 \Gm@layouthoffset=\dimen109 \Gm@layoutvoffset=\dimen110 \Gm@dimlist=\toks15 ) (f:/texlive/2013/texmf-dist/tex/latex/xcolor/xcolor.sty Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK) (f:/texlive/2013/texmf-dist/tex/latex/latexconfig/color.cfg File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive ) Package xcolor Info: Driver file: xetex.def on input line 225. (f:/texlive/2013/texmf-dist/tex/xelatex/xetex-def/xetex.def File: xetex.def 2013/04/29 v0.96 LaTeX color/graphics driver for XeTeX (RRM/JK) ) Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337. Package xcolor Info: Model `RGB' extended on input line 1353. Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355. Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356. Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357. Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358. Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359. Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360. ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/xepersian.sty Package: xepersian 2014/02/05 v13.7 Persian typesetting in XeLaTeX (f:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec.sty Package: fontspec 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLaTeX (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/expl3.sty (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3names.sty (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3bootstrap.sty Package: l3bootstrap 2013/01/08 v4420 L3 Experimental bootstrap code ) Package: l3names 2012/12/07 v4346 L3 Namespace for primitives ) (f:/texlive/2013/texmf-dist/tex/latex/etex-pkg/etex.sty Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count91 ) Package: expl3 2013/03/14 v4469 L3 Experimental code bundle wrapper (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3basics.sty Package: l3basics 2013/01/10 v4428 L3 Basic definitions ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3expan.sty Package: l3expan 2013/02/03 v4458 L3 Argument expansion ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3tl.sty Package: l3tl 2013/01/08 v4415 L3 Token lists ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3seq.sty Package: l3seq 2013/01/12 v4434 L3 Sequences and stacks ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3int.sty Package: l3int 2013/01/13 v4444 L3 Integers \c_max_int=\count92 \l_tmpa_int=\count93 \l_tmpb_int=\count94 \g_tmpa_int=\count95 \g_tmpb_int=\count96 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3quark.sty Package: l3quark 2012/11/04 v4268 L3 Quarks ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3prg.sty Package: l3prg 2013/02/13 v4459 L3 Control structures \g__prg_map_int=\count97 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3clist.sty Package: l3clist 2013/01/08 v4414 L3 Comma separated lists ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3token.sty Package: l3token 2013/01/10 v4428 L3 Experimental token manipulation ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3prop.sty Package: l3prop 2013/01/09 v4423 L3 Property lists ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3msg.sty Package: l3msg 2013/01/08 v4412 L3 Messages ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3file.sty Package: l3file 2013/01/14 v4446 L3 File and I/O operations \l_iow_line_count_int=\count98 \l__iow_target_count_int=\count99 \l__iow_current_line_int=\count100 \l__iow_current_word_int=\count101 \l__iow_current_indentation_int=\count102 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3skip.sty Package: l3skip 2013/01/13 v4444 L3 Dimensions and skips \c_zero_dim=\dimen111 \c_max_dim=\dimen112 \l_tmpa_dim=\dimen113 \l_tmpb_dim=\dimen114 \g_tmpa_dim=\dimen115 \g_tmpb_dim=\dimen116 \c_zero_skip=\skip43 \c_max_skip=\skip44 \l_tmpa_skip=\skip45 \l_tmpb_skip=\skip46 \g_tmpa_skip=\skip47 \g_tmpb_skip=\skip48 \c_zero_muskip=\muskip10 \c_max_muskip=\muskip11 \l_tmpa_muskip=\muskip12 \l_tmpb_muskip=\muskip13 \g_tmpa_muskip=\muskip14 \g_tmpb_muskip=\muskip15 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3keys.sty Package: l3keys 2013/02/24 v4461 L3 Experimental key-value interfaces \g__keyval_level_int=\count103 \l_keys_choice_int=\count104 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3fp.sty Package: l3fp 2013/01/19 v4449 L3 Floating points \c__fp_leading_shift_int=\count105 \c__fp_middle_shift_int=\count106 \c__fp_trailing_shift_int=\count107 \c__fp_big_leading_shift_int=\count108 \c__fp_big_middle_shift_int=\count109 \c__fp_big_trailing_shift_int=\count110 \c__fp_Bigg_leading_shift_int=\count111 \c__fp_Bigg_middle_shift_int=\count112 \c__fp_Bigg_trailing_shift_int=\count113 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3box.sty Package: l3box 2013/01/08 v4411 L3 Experimental boxes \c_empty_box=\box26 \l_tmpa_box=\box27 \l_tmpb_box=\box28 \g_tmpa_box=\box29 \g_tmpb_box=\box30 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3coffins.sty Package: l3coffins 2012/09/09 v4212 L3 Coffin code layer \l__coffin_internal_box=\box31 \l__coffin_internal_dim=\dimen117 \l__coffin_offset_x_dim=\dimen118 \l__coffin_offset_y_dim=\dimen119 \l__coffin_x_dim=\dimen120 \l__coffin_y_dim=\dimen121 \l__coffin_x_prime_dim=\dimen122 \l__coffin_y_prime_dim=\dimen123 \c_empty_coffin=\box32 \l__coffin_aligned_coffin=\box33 \l__coffin_aligned_internal_coffin=\box34 \l_tmpa_coffin=\box35 \l_tmpb_coffin=\box36 \l__coffin_display_coffin=\box37 \l__coffin_display_coord_coffin=\box38 \l__coffin_display_pole_coffin=\box39 \l__coffin_display_offset_dim=\dimen124 \l__coffin_display_x_dim=\dimen125 \l__coffin_display_y_dim=\dimen126 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3color.sty Package: l3color 2012/08/29 v4156 L3 Experimental color support ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3luatex.sty Package: l3luatex 2012/08/03 v4049 L3 Experimental LuaTeX-specific functions \g__cctab_allocate_int=\count114 \g__cctab_stack_int=\count115 ) (f:/texlive/2013/texmf-dist/tex/latex/l3kernel/l3candidates.sty Package: l3candidates 2013/03/14 v4468 L3 Experimental additions to l3kernel \l__box_top_dim=\dimen127 \l__box_bottom_dim=\dimen128 \l__box_left_dim=\dimen129 \l__box_right_dim=\dimen130 \l__box_top_new_dim=\dimen131 \l__box_bottom_new_dim=\dimen132 \l__box_left_new_dim=\dimen133 \l__box_right_new_dim=\dimen134 \l__box_internal_box=\box40 \l__coffin_bounding_shift_dim=\dimen135 \l__coffin_left_corner_dim=\dimen136 \l__coffin_right_corner_dim=\dimen137 \l__coffin_bottom_corner_dim=\dimen138 \l__coffin_top_corner_dim=\dimen139 \l__coffin_scaled_total_height_dim=\dimen140 \l__coffin_scaled_width_dim=\dimen141 )) (f:/texlive/2013/texmf-dist/tex/latex/l3packages/xparse/xparse.sty Package: xparse 2013/03/12 v4467 L3 Experimental document command parser \l__xparse_current_arg_int=\count116 \l__xparse_m_args_int=\count117 \l__xparse_mandatory_args_int=\count118 \l__xparse_processor_int=\count119 \l__xparse_v_nesting_int=\count120 ) \l_fontspec_script_int=\count121 \l_fontspec_language_int=\count122 \l_fontspec_strnum_int=\count123 \l_fontspec_tmpa_dim=\dimen142 \l_fontspec_tmpb_dim=\dimen143 \l_fontspec_tmpc_dim=\dimen144 Variant \tl_gset:cV already defined; not changing it on line 69 (f:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec-patches.sty Package: fontspec-patches 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLa TeX (f:/texlive/2013/texmf-dist/tex/latex/base/fixltx2e.sty Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX LaTeX Info: Redefining \em on input line 420. ) LaTeX Info: Redefining \em on input line 22. LaTeX Info: Redefining \emph on input line 30. LaTeX Info: Redefining \- on input line 33. ************************************************* * LaTeX warning: "xparse/redefine-command" * * Redefining document command \oldstylenums with arg. spec. 'm' on line 128. ************************************************* ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \liningnums with arg. spec. 'm' on line 132. ................................................. ) (f:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec-xetex.sty Package: fontspec-xetex 2013/05/20 v2.3c Font selection for XeLaTeX and LuaLaTe X (f:/texlive/2013/texmf-dist/tex/latex/base/fontenc.sty Package: fontenc 2005/09/27 v1.99g Standard LaTeX package (f:/texlive/2013/texmf-dist/tex/latex/euenc/eu1enc.def File: eu1enc.def 2010/05/27 v0.1h Experimental Unicode font encodings ) LaTeX Font Info: Try loading font information for EU1+lmr on input line 100. (f:/texlive/2013/texmf-dist/tex/latex/euenc/eu1lmr.fd File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern )) (f:/texlive/2013/texmf-dist/tex/xelatex/xunicode/xunicode.sty File: xunicode.sty 2011/09/09 v0.981 provides access to latin accents and many other characters in Unicode lower plane (f:/texlive/2013/texmf-dist/tex/latex/tipa/t3enc.def File: t3enc.def 2001/12/31 T3 encoding LaTeX Font Info: Try loading font information for EU1+lmss on input line 357 . (f:/texlive/2013/texmf-dist/tex/latex/euenc/eu1lmss.fd File: eu1lmss.fd 2009/10/30 v1.6 Font defs for Latin Modern )) \tipaTiiicode=\count124 \tipasavetokens=\toks16 \tipachecktokens=\toks17 (f:/texlive/2013/texmf-dist/tex/latex/graphics/graphicx.sty Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) (f:/texlive/2013/texmf-dist/tex/latex/graphics/graphics.sty Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) (f:/texlive/2013/texmf-dist/tex/latex/graphics/trig.sty Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) (f:/texlive/2013/texmf-dist/tex/latex/latexconfig/graphics.cfg File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live ) Package graphics Info: Driver file: xetex.def on input line 91. ) \Gin@req@height=\dimen145 \Gin@req@width=\dimen146 )) ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \fontspec with arg. spec. 'O{}m' on line 41. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmainfont with arg. spec. 'O{}m' on line 46. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsansfont with arg. spec. 'O{}m' on line 51. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmonofont with arg. spec. 'O{}m' on line 56. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathrm with arg. spec. 'O{}m' on line 65. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setboldmathrm with arg. spec. 'O{}m' on line 69. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsf with arg. spec. 'O{}m' on line 73. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathtt with arg. spec. 'O{}m' on line 77. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfamily with arg. spec. 'mO{}m' on line 96. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontface with arg. spec. 'mO{}m' on line 100. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defaultfontfeatures with arg. spec. 'om' on line . 108. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \addfontfeatures with arg. spec. 'm' on line 144. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfeature with arg. spec. 'mm' on line 156. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newAATfeature with arg. spec. 'mmmm' on line 164. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newICUfeature with arg. spec. 'mmm' on line 172. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeature with arg. spec. 'mm' on line . 201. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeatureoption with arg. spec. 'mmm' on . line 203. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontscript with arg. spec. 'mm' on line 208. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontlanguage with arg. spec. 'mm' on line 235. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \DeclareFontsExtensions with arg. spec. 'm' on . line 256. ................................................. Variant \prop_gput:cnV already defined; not changing it on line 582 Variant \prop_gput:cnx already defined; not changing it on line 583 \l_fontspec_tmp_int=\count125 LaTeX Info: Redefining \itshape on input line 2087. LaTeX Info: Redefining \slshape on input line 2092. LaTeX Info: Redefining \scshape on input line 2097. LaTeX Info: Redefining \upshape on input line 2102. (f:/texlive/2013/texmf-dist/tex/latex/fontspec/fontspec.cfg))) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/xepersian-persiancal.sty Package: xepersian-persiancal 2012/07/25 v0.2 provides Persian calendar \XePersian@i=\count126 \XePersian@y=\count127 \XePersian@m=\count128 \XePersian@d=\count129 \XePersian@latini=\count130 \XePersian@persiani=\count131 \XePersian@latinii=\count132 \XePersian@persianii=\count133 \XePersian@latiniii=\count134 \XePersian@persianiii=\count135 \XePersian@latiniv=\count136 \XePersian@persianiv=\count137 \XePersian@latinv=\count138 \XePersian@persianv=\count139 \XePersian@latinvi=\count140 \XePersian@persianvi=\count141 \XePersian@latinvii=\count142 \XePersian@persianvii=\count143 \XePersian@latinviii=\count144 \XePersian@persianviii=\count145 \XePersian@latinix=\count146 \XePersian@persianix=\count147 \XePersian@latinx=\count148 \XePersian@persianx=\count149 \XePersian@latinxi=\count150 \XePersian@persianxi=\count151 \XePersian@latinxii=\count152 \XePersian@persianxii=\count153 \XePersian@persianxiii=\count154 \XePersian@temp=\count155 \XePersian@temptwo=\count156 \XePersian@tempthree=\count157 \XePersian@yModHundred=\count158 \XePersian@thirtytwo=\count159 \XePersian@dn=\count160 \XePersian@sn=\count161 \XePersian@mminusone=\count162 ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/xepersian-mathsdigitspec.sty Package: xepersian-mathsdigitspec 2013/10/21 v1.0.5 Unicode Persian maths digit s in XeLaTeX ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathbf with arg. spec. 'm' on line 131. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathit with arg. spec. 'm' on line 139. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathrm with arg. spec. 'm' on line 147. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathsf with arg. spec. 'm' on line 155. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathtt with arg. spec. 'm' on line 163. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsfdigitfont with arg. spec. 'O{}m' on line . 193. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathttdigitfont with arg. spec. 'O{}m' on line . 198. ................................................. ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/bidi.sty Package: bidi 2014/02/05 v14.6 Bidirectional typesetting in plain TeX and LaTeX **************************************************** * * bidi package (Bidirectional typesetting in * plain TeX and LaTeX, using XeTeX engine) * * Description: A convenient interface for * typesetting bidirectional texts in plain TeX * and LaTeX. The package includes adaptations * for use with many other commonly-used packages. * * Copyright © 2009–2013 Vafa Khalighi * * 2014/02/05, v14.6 * * License: LaTeX Project Public License, version * 1.3c or higher (your choice) * * Location on CTAN: /macros/xetex/latex/bidi * * Issue tracker: https://github.com/vafa/bidi/issues * * Support: persian-tex@tug.org **************************************************** (f:/texlive/2013/texmf-dist/tex/generic/iftex/iftex.sty Package: iftex 2013/04/04 v0.2 Provides if(tex) conditional for PDFTeX, XeTeX, and LuaTeX ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/biditools.sty Package: biditools 2013/04/10 v0.2 Programming tools for bidi package ) (f:/texlive/2013/texmf-dist/tex/latex/oberdiek/zref-abspage.sty Package: zref-abspage 2012/04/04 v2.24 Module abspage for zref (HO) (f:/texlive/2013/texmf-dist/tex/latex/oberdiek/zref-base.sty Package: zref-base 2012/04/04 v2.24 Module base for zref (HO) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/ltxcmds.sty Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO) ) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/infwarerr.sty Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO) ) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/etexcmds.sty Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/ifluatex.sty Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. ) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. )) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/kvdefinekeys.sty Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO) ) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: pdfTeX >= 1.30 not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. Package pdftexcmds Info: \pdfdraftmode not found. ) (f:/texlive/2013/texmf-dist/tex/latex/oberdiek/auxhook.sty Package: auxhook 2011/03/04 v1.3 Hooks for auxiliary files (HO) ) Package zref Info: New property list: main on input line 759. Package zref Info: New property: default on input line 760. Package zref Info: New property: page on input line 761. ) (f:/texlive/2013/texmf-dist/tex/generic/oberdiek/atbegshi.sty Package: atbegshi 2011/10/05 v1.16 At begin shipout hook (HO) ) \c@abspage=\count163 Package zref Info: New property: abspage on input line 62. ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/latex-xetex-bidi.def File: latex-xetex-bidi.def 2013/10/10 v1.1.5 bidi adaptations for `latex.ltx' f or XeTeX engine \bidi@n@everypar=\toks18 (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/footnote-xetex-bidi.def File: footnote-xetex-bidi.def 2013/04/26 v0.8 bidi footnote macros for XeTeX en gine \c@footdir@label=\count164 \footdir@toks=\toks19 ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/article-xetex-bidi.def File: article-xetex-bidi.def 2010/07/25 v0.4 bidi adaptations for standard arti cle class for XeTeX engine ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/color-xetex-bidi.def File: color-xetex-bidi.def 2013/04/08 v0.2 bidi adaptations for color package f or XeTeX engine LaTeX Info: Redefining \color on input line 46. ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/xcolor-xetex-bidi.def File: xcolor-xetex-bidi.def 2013/04/08 v0.2 bidi adaptations for xcolor package for XeTeX engine LaTeX Info: Redefining \color on input line 45. LaTeX Info: Redefining \bidicolor on input line 88. ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/graphicx-xetex-bidi.def File: graphicx-xetex-bidi.def 2012/01/01 v0.4 bidi adaptations for graphicx pac kage for XeTeX engine ) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/geometry-xetex-bidi.def File: geometry-xetex-bidi.def 2013/04/01 v0.1 bidi adaptations for geometry pac kage for XeTeX engine )) (f:/texlive/2013/texmf-dist/tex/xelatex/bidi/loadingorder-xetex-bidi.def File: loadingorder-xetex-bidi.def 2013/05/22 v0.95 making sure that bidi is the last package loaded )) **************************************************** * * xepersian package (Persian for LaTeX, using XeTeX engine) * * Description: The package supports Persian * typesetting, using fonts provided in the * distribution. * * Copyright © 2008–2013 Vafa Khalighi * * v13.7, 2014/02/05 * * License: LaTeX Project Public License, version * 1.3c or higher (your choice) * * Location on CTAN: /macros/xetex/latex/xepersian * * Issue tracker: https://github.com/vafa/xepersian/issues * * Support: persian-tex@tug.org **************************************************** ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \settextfont with arg. spec. 'O{}m' on line 110. ................................................. \g__file_internal_ior=\read1 \g_fontspec_family_persian-modern-regular_int=\count165 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-regular(0)' created for font . 'persian-modern-regular' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,BoldFont={p ersian-modern-bold},BoldItalicFont={persian-modern-bolditalic},ItalicFont={pers ian-modern-italic},SlantedFont={persian-modern-oblique},BoldSlantedFont={persia n-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-regular]/ICU:script=arab;language=FAR;mapping=parsidigits ;" . . * 'bold' with NFSS spec.: . . <->"[persian-modern-bold]/ICU:script=arab;language=FAR;mapping=parsidigits;" . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italic]/ICU:script=arab;language=FAR;mapping=parsidigits; " . . * 'sl/' with NFSS spec.: . . <->"[persian-modern-oblique]/ICU:script=arab;language=FAR;mapping=parsidigits ;" . . * 'bold italic' with NFSS spec.: . . <->"[persian-modern-bolditalic]/ICU:script=arab;language=FAR;mapping=parsidig its;" . . * 'sl/' with NFSS spec.: . . <->"[persian-modern-boldoblique]/ICU:script=arab;language=FAR;mapping=parsidi gits;" ................................................. ................................................. . fontspec info: "no-scripts" . . Font persian-modern-regular does not contain any OpenType `Script' . information. ................................................. ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-regular(1)' created for font . 'persian-modern-regular' with options . [Mapping=parsidigits,ExternalLocation,BoldFont={persian-modern-bold},BoldItal icFont={persian-modern-bolditalic},ItalicFont={persian-modern-italic},SlantedFo nt={persian-modern-oblique},BoldSlantedFont={persian-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"[persian-modern-regular]/ICU:mapping=parsidigits;" . . * 'bold' with NFSS spec.: . <->"[persian-modern-bold]/ICU:mapping=parsidigits;" . . * 'italic' with NFSS spec.: . <->"[persian-modern-italic]/ICU:mapping=parsidigits;" . . * 'sl/' with NFSS spec.: . <->"[persian-modern-oblique]/ICU:mapping=parsidigits;" . . * 'bold italic' with NFSS spec.: . <->"[persian-modern-bolditalic]/ICU:mapping=parsidigits;" . . * 'sl/' with NFSS spec.: . <->"[persian-modern-boldoblique]/ICU:mapping=parsidigits;" ................................................. Package xepersian-mathsdigitspec Info: DefiningthedefaultPersianmathsdigitsfont as'persian-modern-regular' on input line 112. \symOPERATORS=\mathgroup4 \symnew@mathbf@font@digits=\mathgroup5 \symnew@mathit@font@digits=\mathgroup6 \symnew@mathrm@font@digits=\mathgroup7 ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setlatintextfont with arg. spec. 'O{}m' on line . 121. ................................................. \g_fontspec_family_lmroman10-regular_int=\count166 ................................................. . fontspec info: "defining-font" . . Font family 'lmroman10-regular(0)' created for font 'lmroman10-regular' with . options . [Mapping=tex-text,ExternalLocation,BoldFont={lmroman10-bold},BoldItalicFont={ lmroman10-bolditalic},ItalicFont={lmroman10-italic},SmallCapsFont={lmromancaps1 0-regular},SlantedFont={lmromanslant10-regular},BoldSlantedFont={lmromanslant10 -bold}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"[lmroman10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold' with NFSS spec.: . <->"[lmroman10-bold]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'italic' with NFSS spec.: . <->"[lmroman10-italic]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'italic small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'sl/' with NFSS spec.: . . <->"[lmromanslant10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold italic' with NFSS spec.: . <->"[lmroman10-bolditalic]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold italic small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'sl/' with NFSS spec.: . <->"[lmromanslant10-bold]/ICU:script=latn;language=DFLT;mapping=tex-text;" . . * 'bold small caps' with NFSS spec.: . . <->"[lmromancaps10-regular]/ICU:script=latn;language=DFLT;mapping=tex-text;" ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defpersianfont with arg. spec. 'mO{}m' on line . 133. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \deflatinfont with arg. spec. 'mO{}m' on line 142. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpersiansansfont with arg. spec. 'O{}m' on line . 176. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpersianmonofont with arg. spec. 'O{}m' on line . 180. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setnavarfont with arg. spec. 'O{}m' on line 184. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpookfont with arg. spec. 'O{}m' on line 188. ................................................. \g_fontspec_family_persian-modern-outline_int=\count167 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-outline(0)' created for font . 'persian-modern-outline' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,ItalicFont= {persian-modern-italicoutline},SlantedFont={persian-modern-obliqueoutline}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-outline]/ICU:script=arab;language=FAR;mapping=parsidigits ;" . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italicoutline]/ICU:script=arab;language=FAR;mapping=parsi digits;" . . * 'sl/' with NFSS spec.: . . <->"[persian-modern-obliqueoutline]/ICU:script=arab;language=FAR;mapping=pars idigits;" ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsayehfont with arg. spec. 'O{}m' on line 193. ................................................. \g_fontspec_family_persian-modern-shadow_int=\count168 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-shadow(0)' created for font . 'persian-modern-shadow' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,ItalicFont= {persian-modern-italicshadow},SlantedFont={persian-modern-obliqueshadow}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-shadow]/ICU:script=arab;language=FAR;mapping=parsidigits; " . . * 'italic' with NFSS spec.: . . <->"[persian-modern-italicshadow]/ICU:script=arab;language=FAR;mapping=parsid igits;" . . * 'sl/' with NFSS spec.: . . <->"[persian-modern-obliqueshadow]/ICU:script=arab;language=FAR;mapping=parsi digits;" ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setiranicfont with arg. spec. 'O{}m' on line 198. ................................................. \g_fontspec_family_persian-modern-oblique_int=\count169 ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-oblique(0)' created for font . 'persian-modern-oblique' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,BoldFont={p ersian-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"[persian-modern-oblique]/ICU:script=arab;language=FAR;mapping=parsidigits ;" . . * 'bold' with NFSS spec.: . . <->"[persian-modern-boldoblique]/ICU:script=arab;language=FAR;mapping=parsidi gits;" ................................................. (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/loadingorder-xepersian.def File: loadingorder-xepersian.def 2012/01/01 v0.3 making sure that xepersian is the last package loaded ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/footnote-xepersian.def File: footnote-xepersian.def 2013/04/26 v0.4 footnote macros for xepersian pack age ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/article-xepersian.def File: article-xepersian.def 2010/07/25 v0.2 adaptations for standard article cl ass ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/localise-xepersian.def File: localise-xepersian.def 2010/07/25 v0.2a Persian localisation of LaTeX2e (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/latex-localise-commands-xeper sian.def File: latex-localise-commands-xepersian.def 2014/02/05 v0.3 Persian localisatio n of LaTeX2e commands ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/xepersian-localise-commands-x epersian.def File: xepersian-localise-commands-xepersian.def 2012/07/25 v0.2 Persian localis ation of XePersian commands ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/latex-localise-environments-x epersian.def File: latex-localise-environments-xepersian.def 2010/07/25 v0.2 Persian localis ation of LaTeX2e environments ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/xepersian-localise-environmen ts-xepersian.def File: xepersian-localise-environments-xepersian.def 2010/07/25 v0.1 Persian loc alisation of XePersian and bidi environments ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/latex-localise-messages-xeper sian.def File: latex-localise-messages-xepersian.def 2011/03/01 v0.1 localising LaTeX2e messages ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/latex-localise-misc-xepersian .def File: latex-localise-misc-xepersian.def 2012/01/01 v0.2 miscellaneous Persian l ocalisation of LaTeX2e ) (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/packages-localise-xepersian.d ef File: packages-localise-xepersian.def 2013/04/24 v0.2 localising LaTeX2e Packag es (f:/texlive/2013/texmf-dist/tex/xelatex/xepersian/color-localise-xepersian.def File: color-localise-xepersian.def 2011/03/01 v0.1 localising color package )) ************************************************* * fontspec warning: "rename-feature-not-exist" * * The feature Renderer doesn't appear to be defined. ************************************************* )) \g_fontspec_family_XB Niloofar_int=\count170 ................................................. . fontspec info: "defining-font" . . Font family 'XBNiloofar(0)' created for font 'XB Niloofar' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"XB Niloofar/ICU:script=arab;language=FAR;mapping=parsidigits;" . . * 'bold' with NFSS spec.: . <->"XB Niloofar/B/ICU:script=arab;language=FAR;mapping=parsidigits;" . . * 'italic' with NFSS spec.: . <->"XB Niloofar/I/ICU:script=arab;language=FAR;mapping=parsidigits;" . . * 'bold italic' with NFSS spec.: . <->"XB Niloofar/BI/ICU:script=arab;language=FAR;mapping=parsidigits;" ................................................. LaTeX Info: Redefining \persianfont on input line 6. (./harakat.aux) \openout1 = `harakat.aux'. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for EU1/lmr/m/n on input line 7. LaTeX Font Info: ... okay on input line 7. LaTeX Font Info: Checking defaults for T3/cmr/m/n on input line 7. LaTeX Font Info: Try loading font information for T3+cmr on input line 7. (f:/texlive/2013/texmf-dist/tex/latex/tipa/t3cmr.fd File: t3cmr.fd 2001/12/31 TIPA font definitions ) LaTeX Font Info: ... okay on input line 7. *geometry* driver: auto-detecting *geometry* detected driver: xetex *geometry* verbose mode - [ preamble ] result: * driver: xetex * paper: custom * layout: * layoutoffset:(h,v)=(0.0pt,0.0pt) * modes: * h-part:(L,W,R)=(42.67957pt, 199.16841pt, 42.67958pt) * v-part:(T,H,B)=(34.14365pt, 199.16841pt, 51.2155pt) * \paperwidth=284.52756pt * \paperheight=284.52756pt * \textwidth=199.16841pt * \textheight=199.16841pt * \oddsidemargin=-29.59042pt * \evensidemargin=-29.59042pt * \topmargin=-75.12634pt * \headheight=12.0pt * \headsep=25.0pt * \topskip=10.0pt * \footskip=30.0pt * \marginparwidth=65.0pt * \marginparsep=11.0pt * \columnsep=10.0pt * \skip\footins=9.0pt plus 4.0pt minus 2.0pt * \hoffset=0.0pt * \voffset=0.0pt * \mag=1000 * \@twocolumnfalse * \@twosidefalse * \@mparswitchfalse * \@reversemarginfalse * (1in=72.27pt=25.4mm, 1cm=28.453pt) \AtBeginShipoutBox=\box41 LaTeX Font Info: External font `cmex10' loaded for size (Font) <7> on input line 9. LaTeX Font Info: External font `cmex10' loaded for size (Font) <5> on input line 9. Overfull \hbox (13.30939pt too wide) in paragraph at lines 8--11 [][]\EU1/XBNiloofar(0)/m/n/10 سَلام، این یِک مَتنِ ساده در $[]$اَست. من می‌خواه َم[] [] [1 ] (./harakat.aux) ) Here is how much of TeX's memory you used: 17965 strings out of 493938 377657 string characters out of 6151978 401164 words of memory out of 5000000 20988 multiletter control sequences out of 15000+600000 3952 words of font info for 53 fonts, out of 8000000 for 9000 1144 hyphenation exceptions out of 8191 53i,9n,40p,914b,193s stack positions out of 5000i,500n,10000p,200000b,80000s Output written on harakat.pdf (1 page).