This is XeTeX, Version 3.1415926-2.2-0.9995.1 (MiKTeX 2.8) (preloaded format=xelatex 2010.6.26)  11 JUL 2010 21:55
entering extended mode
**"slide_bidipresentation".tex
("D:\Documents and Settings\xp\Desktop\final\slide_bidipresentation.tex"
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, german-x-2009-06-19, ngerman-x-2009-06-19, french, loaded.
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\bidipresentation.cls"
Document Class: bidipresentation 
("D:\Program Files\MiKTeX 2.8\tex\latex\base\article.cls"
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
("D:\Program Files\MiKTeX 2.8\tex\latex\base\size10.clo"
File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\c@part=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\c@figure=\count86
\c@table=\count87
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
("D:\Program Files\MiKTeX 2.8\tex\latex\geometry\geometry.sty"
Package: geometry 2010/03/13 v5.3 Page Geometry

("D:\Program Files\MiKTeX 2.8\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\ifpdf.sty"
Package: ifpdf 2010/01/28 v2.1 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in pdf mode not detected.
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\ifvtex.sty"
Package: ifvtex 2010/03/01 v1.5 Switches for detecting VTeX and its modes (HO)
Package ifvtex Info: VTeX not detected.
)
\Gm@cnth=\count88
\Gm@cntv=\count89
\c@Gm@tempcnt=\count90
\Gm@bindingoffset=\dimen103
\Gm@wd@mp=\dimen104
\Gm@odd@mp=\dimen105
\Gm@even@mp=\dimen106
\Gm@layoutwidth=\dimen107
\Gm@layoutheight=\dimen108
\Gm@layouthoffset=\dimen109
\Gm@layoutvoffset=\dimen110
\Gm@dimlist=\toks15

("D:\Program Files\MiKTeX 2.8\tex\xelatex\xetexconfig\geometry.cfg"))
("D:\Program Files\MiKTeX 2.8\tex\latex\fancyhdr\fancyhdr.sty"
\fancy@headwidth=\skip43
\f@ncyO@elh=\skip44
\f@ncyO@erh=\skip45
\f@ncyO@olh=\skip46
\f@ncyO@orh=\skip47
\f@ncyO@elf=\skip48
\f@ncyO@erf=\skip49
\f@ncyO@olf=\skip50
\f@ncyO@orf=\skip51
)

Package Fancyhdr Warning: \fancyfoot's `E' option without twoside option is use
less on input line 32.

) ("D:\Program Files\MiKTeX 2.8\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)

("D:\Program Files\MiKTeX 2.8\tex\latex\graphics\graphics.sty"
Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR)

("D:\Program Files\MiKTeX 2.8\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("D:\Program Files\MiKTeX 2.8\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: xetex.def on input line 91.

("D:\Program Files\MiKTeX 2.8\tex\xelatex\xetex-def\xetex.def"
File: xetex.def 2009/11/22 v0.94 LaTeX color/graphics driver for XeTeX (RRM/JK)

))
\Gin@req@height=\dimen111
\Gin@req@width=\dimen112
)
("D:\Program Files\MiKTeX 2.8\tex\latex\pstricks\pstricks.sty"
Package: pstricks 2010/06/17 v0.45 LaTeX wrapper for `PSTricks' (RN,HV)

("D:\Program Files\MiKTeX 2.8\tex\generic\pstricks\pstricks.tex"
("D:\Program Files\MiKTeX 2.8\tex\generic\xkeyval\pst-xkey.tex"
File: pst-xkey.tex 2005/11/25 v1.6 PSTricks specialization of xkeyval (HA)

("D:\Program Files\MiKTeX 2.8\tex\latex\xkeyval\xkeyval.sty"
Package: xkeyval 2008/08/13 v2.6a package option processing (HA)

("D:\Program Files\MiKTeX 2.8\tex\generic\xkeyval\xkeyval.tex"
\XKV@toks=\toks16
\XKV@tempa@toks=\toks17
\XKV@depth=\count91
File: xkeyval.tex 2008/08/13 v2.6a key=value parser (HA)
)))
("D:\Program Files\MiKTeX 2.8\tex\generic\pstricks\pst-fp.tex"
`pst-fp' v0.06, 2010/05/14 (hv)
\pstFP@xs=\count92
\pstFP@xia=\count93
\pstFP@xib=\count94
\pstFP@xfa=\count95
\pstFP@xfb=\count96
\pstFP@rega=\count97
\pstFP@regb=\count98
\pstFP@regs=\count99
\pstFP@times=\count100
)
\psLoopIndex=\count101

`PSTricks' v2.08  <2010/06/06> (tvz)
\pst@dima=\dimen113
\pst@dimb=\dimen114
\pst@dimc=\dimen115
\pst@dimd=\dimen116
\pst@dimg=\dimen117
\pst@dimh=\dimen118
\pst@dimm=\dimen119
\pst@dimn=\dimen120
\pst@dimo=\dimen121
\pst@dimp=\dimen122
\pst@hbox=\box26
\pst@boxg=\box27
\pst@cnta=\count102
\pst@cntb=\count103
\pst@cntc=\count104
\pst@cntd=\count105
\pst@cntg=\count106
\pst@cnth=\count107
\pst@cntm=\count108
\pst@cntn=\count109
\pst@cnto=\count110
\pst@cntp=\count111
\@zero=\count112
\pst@toks=\toks18
("D:\Program Files\MiKTeX 2.8\tex\xelatex\xetex-pstricks\pstricks.con"
("D:\Documents and Settings\xp\Desktop\final\xdvipdfmx.cfg"))
\psunit=\dimen123
\psxunit=\dimen124
\psyunit=\dimen125
\pslinewidth=\dimen126
\pst@customdefs=\toks19
\pslinearc=\dimen127
\pst@symbolStep=\dimen128
\pst@symbolWidth=\dimen129
\everypsbox=\toks20
\psframesep=\dimen130
\pslabelsep=\dimen131
\pst@shift=\dimen132
\theoverlaybox=\box28

("D:\Program Files\MiKTeX 2.8\tex\xelatex\xetex-pstricks\pstricks.con"
("D:\Documents and Settings\xp\Desktop\final\xdvipdfmx.cfg"
Using PSTricks configuration for XeTeX+xdvipdfmx
)))
File: pstricks.tex 2010/06/06 v2.08 `PSTricks' (tvz,hv)
 ("D:\Program Files\MiKTeX 2.8\tex\generic\pstricks\pst-fp.tex")
File: pst-fp.tex 2010/06/06 v2.08 `PST-fp' (hv)

("D:\Program Files\MiKTeX 2.8\tex\latex\xcolor\xcolor.sty"
Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK)

("D:\Program Files\MiKTeX 2.8\tex\latex\00miktex\color.cfg"
File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
)
Package xcolor Info: Driver file: xetex.def on input line 225.
Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337.
Package xcolor Info: Model `RGB' extended on input line 1353.
Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355.
Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356.
Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357.
Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358.
Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359.
Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360.
))
("D:\Program Files\MiKTeX 2.8\tex\latex\hyperref\hyperref.sty"
Package: hyperref 2010/06/18 v6.81g Hypertext links for LaTeX

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\ltxcmds.sty"
Package: ltxcmds 2010/04/26 v1.7 LaTeX kernel commands for general use (HO)
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\kvsetkeys.sty"
Package: kvsetkeys 2010/03/01 v1.9 Key value parser (HO)

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\infwarerr.sty"
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\etexcmds.sty"
Package: etexcmds 2010/01/28 v1.3 Prefix for e-TeX command names (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds)             That can mean that you are not using pdfTeX 1.50 or
(etexcmds)             that some package has redefined \expanded.
(etexcmds)             In the latter case, load this package earlier.
))
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\pdfescape.sty"
Package: pdfescape 2010/03/01 v1.9 Provides hex, PDF name and string conversion
s (HO)

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\pdftexcmds.sty"
Package: pdftexcmds 2010/04/01 v0.9 Utility functions of pdfTeX for LuaTeX (HO)


("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\ifluatex.sty"
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: pdfTeX >= 1.30 not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
))
("D:\Program Files\MiKTeX 2.8\tex\latex\ifxetex\ifxetex.sty"
Package: ifxetex 2009/01/23 v0.5 Provides ifxetex conditional
)
("D:\Program Files\MiKTeX 2.8\tex\latex\oberdiek\hycolor.sty"
Package: hycolor 2009/12/12 v1.6 Color options of hyperref/bookmark (HO)

("D:\Program Files\MiKTeX 2.8\tex\latex\oberdiek\xcolor-patch.sty"
Package: xcolor-patch 2009/12/12 xcolor patch
))
("D:\Program Files\MiKTeX 2.8\tex\latex\oberdiek\letltxmacro.sty"
Package: letltxmacro 2008/06/24 v1.3 Let assignment for LaTeX macros (HO)
)
\@linkdim=\dimen133
\Hy@linkcounter=\count113
\Hy@pagecounter=\count114

("D:\Program Files\MiKTeX 2.8\tex\latex\hyperref\pd1enc.def"
File: pd1enc.def 2010/06/18 v6.81g Hyperref: PDFDocEncoding definition (HO)
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\intcalc.sty"
Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO)
)
("D:\Program Files\MiKTeX 2.8\tex\latex\00miktex\hyperref.cfg"
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
("D:\Program Files\MiKTeX 2.8\tex\latex\oberdiek\kvoptions.sty"
Package: kvoptions 2010/02/22 v3.7 Keyval support for LaTeX options (HO)
)
Package hyperref Info: Hyper figures OFF on input line 3658.
Package hyperref Info: Link nesting OFF on input line 3663.
Package hyperref Info: Hyper index ON on input line 3666.
Package hyperref Info: Plain pages OFF on input line 3673.
Package hyperref Info: Backreferencing OFF on input line 3678.

Implicit mode ON; LaTeX internals redefined
Package hyperref Info: Bookmarks ON on input line 3874.
("D:\Program Files\MiKTeX 2.8\tex\xelatex\xetexurl\url.sty"
\Urlmuskip=\muskip10
Package: url 2004/03/15  ver 3.1  Verb mode for urls, etc.
)
LaTeX Info: Redefining \url on input line 4159.

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\bitset.sty"
Package: bitset 2007/09/28 v1.0 Data type bit set (HO)

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\bigintcalc.sty"
Package: bigintcalc 2007/11/11 v1.1 Expandable big integer calculations (HO)
))
\Fld@menulength=\count115
\Field@Width=\dimen134
\Fld@charsize=\dimen135
\Field@toks=\toks21
Package hyperref Info: Hyper figures OFF on input line 5137.
Package hyperref Info: Link nesting OFF on input line 5142.
Package hyperref Info: Hyper index ON on input line 5145.
Package hyperref Info: backreferencing OFF on input line 5152.
Package hyperref Info: Link coloring OFF on input line 5157.
Package hyperref Info: Link coloring with OCG OFF on input line 5162.
Package hyperref Info: PDF/A mode OFF on input line 5167.
LaTeX Info: Redefining \ref on input line 5207.
LaTeX Info: Redefining \pageref on input line 5211.

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\atbegshi.sty"
Package: atbegshi 2010/03/25 v1.12 At begin shipout hook (HO)
)
\Hy@abspage=\count116
\c@Item=\count117
\c@Hfootnote=\count118
)
* hyperref using default driver hxetex *
("D:\Program Files\MiKTeX 2.8\tex\latex\hyperref\hxetex.def"
File: hxetex.def 2010/06/18 v6.81g Hyperref driver for XeTeX

("D:\Program Files\MiKTeX 2.8\tex\latex\hyperref\puenc.def"
File: puenc.def 2010/06/18 v6.81g Hyperref: PDF Unicode definition (HO)
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\stringenc.sty"
Package: stringenc 2010/03/01 v1.8 Converts strings between encodings (HO)
)
\pdfm@box=\box29
\c@Hy@AnnotLevel=\count119
\HyField@AnnotCount=\count120
\Fld@listcount=\count121
\c@bookmark@seq@number=\count122

("D:\Program Files\MiKTeX 2.8\tex\latex\oberdiek\rerunfilecheck.sty"
Package: rerunfilecheck 2010/03/16 v1.6 Rerun checks for auxiliary files (HO)
Package rerunfilecheck Info: Feature \pdfmdfivesum is not available
(rerunfilecheck)             (e.g. pdfTeX or LuaTeX with package `pdftexcmds').

(rerunfilecheck)             Therefore file contents cannot be checked efficien
tly
(rerunfilecheck)             and the loading of the package is aborted.
)
\Hy@SectionHShift=\skip52
)
("D:\Program Files\MiKTeX 2.8\tex\latex\eso-pic\eso-pic.sty"
Package: eso-pic 2010/06/08 v2.0b eso-pic (RN)
)
("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\xepersian.sty"
Package: xepersian 2010/07/25 v1.0.8 <commit 22> Persian typesetting in XeLaTeX


("D:\Program Files\MiKTeX 2.8\tex\latex\fontspec\fontspec.sty"
Package: fontspec 2010/06/08 v2.0 Advanced font selection for XeLaTeX/LuaLaTeX

("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\expl3.sty"
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3names.sty"
Package: l3names 2010/03/21 v1853 L3 Experimental Naming Scheme for TeX Primiti
ves
)
Package: expl3 2010/05/19 v1905 L3 Experimental code bundle wrapper

("D:\Program Files\MiKTeX 2.8\tex\latex\misc\etex.sty"
Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB)
\et@xins=\count123
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3basics.sty"
Package: l3basics 2010/06/07 v1942 L3 Experimental basic definitions
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3expan.sty"
Package: l3expan 2010/03/24 v1873 L3 Experimental Argument Expansion module
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3tl.sty"
Package: l3tl 2010/05/22 v1919 L3 Experimental Token Lists
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3intexpr.sty"
Package: l3intexpr 2009/03/20 v1086 L3 Integer Expressions
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3quark.sty"
Package: l3quark 2010/03/21 v1853 L3 Experimental Quark Commands
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3seq.sty"
Package: l3seq 2010/03/29 v1879 L3 Experimental sequences and stacks
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3toks.sty"
Package: l3toks 2010/05/25 v1933 L3 Experimental Token Registers
\l_tmpb_toks=\toks22
\l_tmpc_toks=\toks23
\g_tmpa_toks=\toks24
\g_tmpb_toks=\toks25
\g_tmpc_toks=\toks26
\c_empty_toks=\toks27
\l_tl_replace_toks=\toks28
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3int.sty"
Package: l3int 2010/05/25 v1933 L3 Experimental Integer module
\l_tmpa_int=\count124
\l_tmpb_int=\count125
\l_tmpc_int=\count126
\g_tmpa_int=\count127
\g_tmpb_int=\count128
\c_max_int=\count129
\g_tl_inline_level_int=\count130
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3prg.sty"
Package: l3prg 2010/03/21 v1853 L3 Experimental control structures
\g_prg_inline_level_int=\count131
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3clist.sty"
Package: l3clist 2010/03/29 v1878 L3 Experimental comma separated lists
\g_clist_inline_level_int=\count132
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3token.sty"
Package: l3token 2010/04/11 v1890 L3 Experimental token investigation and manip
ulation
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3prop.sty"
Package: l3prop 2010/03/21 v1857 L3 Experimental Property Lists
\g_prop_inline_level_int=\count133
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3msg.sty"
Package: l3msg 2010/03/23 v1866 L3 Experimental LaTeX Messages module
\l_msg_redirect_classes_prop=\toks29
\l_msg_redirect_names_prop=\toks30
\l_msg_redirect_fatal_prop=\toks31
\l_msg_redirect_error_prop=\toks32
\l_msg_redirect_warning_prop=\toks33
\l_msg_redirect_info_prop=\toks34
\l_msg_redirect_log_prop=\toks35
\l_msg_redirect_trace_prop=\toks36
\l_msg_redirect_none_prop=\toks37
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3io.sty"
Package: l3io 2010/05/22 v1923 L3 Experimental i/o module
\g_iow_streams_prop=\toks38
\g_ior_streams_prop=\toks39
\l_iow_stream_int=\count134
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3skip.sty"
Package: l3skip 2010/05/25 v1933 L3 Experimental skip registers
\l_tmpa_skip=\skip53
\l_tmpb_skip=\skip54
\l_tmpc_skip=\skip55
\g_tmpa_skip=\skip56
\g_tmpb_skip=\skip57
\l_tmpa_dim=\dimen136
\l_tmpb_dim=\dimen137
\l_tmpc_dim=\dimen138
\l_tmpd_dim=\dimen139
\g_tmpa_dim=\dimen140
\g_tmpb_dim=\dimen141
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3box.sty"
Package: l3box 2010/05/22 v1919 L3 Experimental Box module
\l_tmpb_box=\box30
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3keyval.sty"
Package: l3keyval 2010/04/11 v1890 L3 Experimental keyval processing
\l_KV_level_int=\count135
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3keys.sty"
Package: l3keys 2010/05/24 v1931 L3 Experimental key-value support
\l_keys_choice_int=\count136
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3precom.sty"
Package: l3precom 2010/02/09 v1793 L3 Experimental precompilation module
\g_gen_sym_int=\count137
\g_ggen_sym_int=\count138
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3calc.sty"
Package: l3calc 2010/02/07 v1776 L3 Experimental calc module
\l_calc_current_type_int=\count139
\g_calc_A_int=\count140
\l_calc_B_int=\count141
\l_calc_C_int=\count142
\g_calc_A_dim=\dimen142
\l_calc_B_dim=\dimen143
\l_calc_C_dim=\dimen144
\g_calc_A_skip=\skip58
\l_calc_B_skip=\skip59
\l_calc_C_skip=\skip60
\g_calc_A_muskip=\muskip11
\l_calc_B_muskip=\muskip12
\l_calc_C_muskip=\muskip13
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3xref.sty"
Package: l3xref 2010/02/09 v1786 L3 Experimental cross referencing
\g_xref_all_curr_immediate_fields_prop=\toks40
\g_xref_all_curr_deferred_fields_prop=\toks41
)
("D:\Program Files\MiKTeX 2.8\tex\latex\expl3\l3file.sty"
Package: l3file 2010/03/21 v1853 L3 Experimental file loading
))
("D:\Program Files\MiKTeX 2.8\tex\latex\xpackages\xbase\xparse.sty"
Package: xparse 2010/05/23 v1927 Generic document command parser
\c_xparse_shorthands_prop=\toks42
\l_xparse_m_args_int=\count143
\l_xparse_mandatory_args_int=\count144
\l_xparse_processor_int=\count145
\l_xparse_total_args_int=\count146
)
("D:\Program Files\MiKTeX 2.8\tex\generic\binhex\binhex.tex")
\c@zf@newff=\count147
\c@zf@index=\count148
\c@zf@script=\count149
\c@zf@language=\count150
\l_fontspec_strnum_int=\count151

("D:\Program Files\MiKTeX 2.8\tex\latex\fontspec\fontspec-patches.sty"
Package: fontspec-patches 2010/06/08 v2.0 Advanced font selection for XeLaTeX/L
uaLaTeX

("D:\Program Files\MiKTeX 2.8\tex\latex\base\fixltx2e.sty"
Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX
LaTeX Info: Redefining \em on input line 420.
)
LaTeX Info: Redefining \em on input line 22.
LaTeX Info: Redefining \emph on input line 26.
LaTeX Info: Redefining \- on input line 29.
)
("D:\Program Files\MiKTeX 2.8\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package

("D:\Program Files\MiKTeX 2.8\tex\latex\euenc\eu1enc.def"
File: eu1enc.def 2010/05/27 v0.1g Experimental Unicode font encodings
)
LaTeX Font Info:    Try loading font information for EU1+lmr on input line 100.


("D:\Program Files\MiKTeX 2.8\tex\latex\euenc\eu1lmr.fd"
File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern
))
 LaTeX Info: Defining document command \fontspec
(LaTeX)  with arg. spec. 'O{}m' on line 256.

 LaTeX Info: Defining document command \setmainfont
(LaTeX)  with arg. spec. 'O{}m' on line 260.

 LaTeX Info: Defining document command \setsansfont
(LaTeX)  with arg. spec. 'O{}m' on line 264.

 LaTeX Info: Defining document command \setmonofont
(LaTeX)  with arg. spec. 'O{}m' on line 268.

 LaTeX Info: Defining document command \setmathrm
(LaTeX)  with arg. spec. 'O{}m' on line 272.

 LaTeX Info: Defining document command \setboldmathrm
(LaTeX)  with arg. spec. 'O{}m' on line 275.

 LaTeX Info: Defining document command \setmathsf
(LaTeX)  with arg. spec. 'O{}m' on line 278.

 LaTeX Info: Defining document command \setmathtt
(LaTeX)  with arg. spec. 'O{}m' on line 281.

 LaTeX Info: Defining document command \newfontfamily
(LaTeX)  with arg. spec. 'mO{}m' on line 296.

 LaTeX Info: Defining document command \newfontface
(LaTeX)  with arg. spec. 'mO{}m' on line 299.

 LaTeX Info: Defining document command \defaultfontfeatures
(LaTeX)  with arg. spec. 'm' on line 300.

 LaTeX Info: Defining document command \addfontfeatures
(LaTeX)  with arg. spec. 'm' on line 317.

 LaTeX Info: Defining document command \newfontfeature
(LaTeX)  with arg. spec. 'mm' on line 326.

 LaTeX Info: Defining document command \newAATfeature
(LaTeX)  with arg. spec. 'mmmm' on line 335.

 LaTeX Info: Defining document command \newICUfeature
(LaTeX)  with arg. spec. 'mmm' on line 344.

 LaTeX Info: Defining document command \aliasfontfeature
(LaTeX)  with arg. spec. 'mm' on line 346.

 LaTeX Info: Defining document command \aliasfontfeatureoption
(LaTeX)  with arg. spec. 'mmm' on line 349.

 LaTeX Info: Defining document command \newfontscript
(LaTeX)  with arg. spec. 'mm' on line 354.

 LaTeX Info: Defining document command \newfontlanguage
(LaTeX)  with arg. spec. 'mm' on line 371.

 LaTeX Info: Defining document command \DeclareFontsExtensions
(LaTeX)  with arg. spec. 'm' on line 387.

\c@fontspec_tmp_int=\count152
LaTeX Info: Redefining \itshape on input line 1910.
LaTeX Info: Redefining \slshape on input line 1914.
LaTeX Info: Redefining \scshape on input line 1918.
LaTeX Info: Redefining \upshape on input line 1922.

fontspec.cfg loaded.
("D:\Program Files\MiKTeX 2.8\tex\latex\fontspec\fontspec.cfg"))
("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\xepersian-persiancal.sty"
Package: xepersian-persiancal 2010/07/25 v0.1 provides Persian calendar
\XePersian@i=\count153
\XePersian@y=\count154
\XePersian@m=\count155
\XePersian@d=\count156
\XePersian@latini=\count157
\XePersian@persiani=\count158
\XePersian@latinii=\count159
\XePersian@persianii=\count160
\XePersian@latiniii=\count161
\XePersian@persianiii=\count162
\XePersian@latiniv=\count163
\XePersian@persianiv=\count164
\XePersian@latinv=\count165
\XePersian@persianv=\count166
\XePersian@latinvi=\count167
\XePersian@persianvi=\count168
\XePersian@latinvii=\count169
\XePersian@persianvii=\count170
\XePersian@latinviii=\count171
\XePersian@persianviii=\count172
\XePersian@latinix=\count173
\XePersian@persianix=\count174
\XePersian@latinx=\count175
\XePersian@persianx=\count176
\XePersian@latinxi=\count177
\XePersian@persianxi=\count178
\XePersian@latinxii=\count179
\XePersian@persianxii=\count180
\XePersian@persianxiii=\count181
\XePersian@temp=\count182
\XePersian@temptwo=\count183
\XePersian@tempthree=\count184
\XePersian@yModHundred=\count185
\XePersian@thirtytwo=\count186
\XePersian@dn=\count187
\XePersian@sn=\count188
\XePersian@mminusone=\count189
)
("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\xepersian-mathsdigitspec.st
y"
Package: xepersian-mathsdigitspec 2010/07/25 v0.6 Unicode Persian maths digits 
in XeLaTeX
) ("D:\Program Files\MiKTeX 2.8\tex\latex\etoolbox\etoolbox.sty"
Package: etoolbox 2010/04/10 v1.9 e-TeX tools for LaTeX
\etb@tempcnta=\count190
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\bidi.sty"
Package: bidi 2010/07/25 v1.1.3 <commit 69> Bidirectional typesetting in plain 
TeX and LaTeX

bidi package (Support for bidirectional typesetting in plain TeX and LaTeX)
 Description: A convenient interface for typesetting bidirectional
 texts in plain TeX and LaTeX. The package includes adaptations for use
 with many other commonly-used packages.
 Copyright © 2009-2010 Vafa Khalighi
 v1.1.3, <commit 69>, 2010/07/25
 License: LaTeX Project Public License, version 1.3c or higher (your choice)
 Home: http://bitbucket.org/vafa/bidi
 Location on CTAN: /macros/latex/contrib/bidi
("D:\Program Files\MiKTeX 2.8\tex\latex\iftex\iftex.sty"
Package: iftex 2010/07/25 v0.2 Provides if(tex) conditional for PDFTeX, XeTeX, 
and LuaTeX
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\loadingorder-bidi.def"
File: loadingorder-bidi.def 2010/07/25 v0.5 making sure that bidi is the last p
ackage loaded
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\xetex-bidi.def"
File: xetex-bidi.def 2010/07/25 v0.7 bidi adaptations for XeTeX engine
\n@everypar=\toks43

("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\footnote-xetex-bidi.def"
File: footnote-xetex-bidi.def 2010/07/25 v0.5 bidi footnote macros for XeTeX en
gine
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\article-xetex-bidi.def"
File: article-xetex-bidi.def 2010/07/25 v0.4 bidi adaptations for standard arti
cle class for XeTeX engine
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\color-xetex-bidi.def"
File: color-xetex-bidi.def 2010/07/25 v0.1 bidi adaptations for color package f
or XeTeX engine
LaTeX Info: Redefining \color on input line 19.
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\xcolor-xetex-bidi.def"
File: xcolor-xetex-bidi.def 2010/07/25 v0.1 bidi adaptations for xcolor package
 for XeTeX engine
LaTeX Info: Redefining \color on input line 18.
LaTeX Info: Redefining \bidicolor on input line 61.
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\graphicx-xetex-bidi.def"
File: graphicx-xetex-bidi.def 2010/07/25 v0.3 bidi adaptations for graphicx pac
kage for XeTeX engine
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\hyperref-xetex-bidi.def"
File: hyperref-xetex-bidi.def 2010/07/25 v0.4 bidi adaptations for hyperref pac
kage for XeTeX engine
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\fancyhdr-xetex-bidi.def"
File: fancyhdr-xetex-bidi.def 2010/07/25 v0.2 bidi adaptations for fancyhdr pac
kage for XeTeX engine
)
("D:\Program Files\MiKTeX 2.8\tex\latex\bidi\pstricks-xetex-bidi.def"
File: pstricks-xetex-bidi.def 2010/07/25 v0.3 bidi adaptations for pstricks pac
kage for XeTeX engine
))

Package bidi Warning: Thanks for testing the development version of bidi packag
e. The development version may not work correctly or may not work at all. The d
evelopment version is not recommended to be used for production purposes and sh
ould only be used for testing purposes. You are encouraged to use the stable ve
rsion of bidi package available on CTAN for production purposes.

)
xepersian package (Persian for LaTeX over XeTeX)
 Description: The package supports Persian
 typesetting, using fonts provided in the distribution.
 Copyright © 2008-2010 Vafa Khalighi
 v1.0.8, <commit 22>, 2010/07/25
 License: LaTeX Project Public License, version 1.3c or higher (your choice)
 Home: http://bitbucket.org/vafa/xepersian
 Location on CTAN: /macros/xetex/latex/xepersian

Package xepersian Warning: Thanks for testing the development version of xepers
ian package. The development version may not work correctly or may not work at 
all. The development version is not recommended to be used for production purpo
ses and should only be used for testing purposes. You are encouraged to use the
 stable version of xepersian package available on CTAN for production purposes.



("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\loadingorder-bidi-xepersian
.def"
File: loadingorder-bidi-xepersian.def 2010/07/25 v0.2 making sure that xepersia
n is the last package loaded
)
("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\footnote-bidi-xepersian.def
"
File: footnote-bidi-xepersian.def 2010/07/25 v0.2 footnote macros for xepersian
 package
) ("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\hyperref-xepersian.def"
File: hyperref-xepersian.def 2010/07/25 v0.3 bilingual captions for hyperref pa
ckage
) ("D:\Program Files\MiKTeX 2.8\tex\xelatex\xepersian\article-xepersian.def"
File: article-xepersian.def 2010/07/25 v0.2 adaptations for standard article cl
ass
))
\c@zf@famc@XB Zar=\count191
 fontspec Info: Defining font family for 'XB Zar' with options [Script=Persian,
Mapping=parsidigits,].

Package fontspec Info: Defining shape m/n with raw font features:
(fontspec)             mapping=parsidigits;.
Package fontspec Info: Defining shape bx/n with raw font features:
(fontspec)             mapping=parsidigits;.
Package fontspec Info: Defining shape m/it with raw font features:
(fontspec)             mapping=parsidigits;.
Package fontspec Info: Defining shape bx/it with raw font features:
(fontspec)             mapping=parsidigits;.
 fontspec Info: Defining font family for 'XB Zar' with options [].

Package fontspec Info: Defining shape m/n with raw font features:
(fontspec)             .
Package fontspec Info: Defining shape bx/n with raw font features:
(fontspec)             .
Package fontspec Info: Defining shape m/it with raw font features:
(fontspec)             .
Package fontspec Info: Defining shape bx/it with raw font features:
(fontspec)             .
Package xepersian-mathsdigitspec Info: Defining the default Persian maths digit
s font as 'XB Zar' on input line 10.
\symOPERATORS=\mathgroup4


Package Fancyhdr Warning: \fancyfoot's `E' option without twoside option is use
less on input line 11.

LaTeX Info: Redefining \persianfont on input line 12.
("D:\Documents and Settings\xp\Desktop\final\slide_bidipresentation.aux")
LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for PD1/pdf/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for PU/pdf/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.
LaTeX Font Info:    Checking defaults for EU1/lmr/m/n on input line 14.
LaTeX Font Info:    ... okay on input line 14.

*geometry* detected driver: pdftex
*geometry* verbose mode - [ preamble ] result:
* driver: pdftex
* paper: 364.19527pt, 273.14645pt (class default)
* layout: 364.19527pt, 273.14645pt
* switch(es): 
* h-part:(L,W,R)=(14.22636pt, 330.05199pt, 19.91692pt)
* v-part:(T,H,B)=(14.22636pt, 236.1579pt, 22.76219pt)
* \paperwidth=364.19527pt
* \paperheight=273.14645pt
* \textwidth=330.05199pt
* \textheight=236.1579pt
* \oddsidemargin=-58.04362pt
* \evensidemargin=-58.04362pt
* \topmargin=-83.04362pt
* \headheight=0.0pt
* \headsep=25.0pt
* \footskip=10.2pt
* \marginparwidth=65.0pt
* \marginparsep=11.0pt
* \columnsep=10.0pt
* \skip\footins=9.0pt plus 4.0pt minus 2.0pt
* \hoffset=0.0pt
* \voffset=0.0pt
* \mag=1000
* \@twocolumnfalse
* \@twosidefalse
* \@mparswitchfalse
* \@reversemarginfalse
* (1in=72.27pt, 1cm=28.453pt)

\AtBeginShipoutBox=\box31
Package hyperref Info: Link coloring OFF on input line 14.
("D:\Program Files\MiKTeX 2.8\tex\latex\hyperref\nameref.sty"
Package: nameref 2010/04/30 v2.40 Cross-referencing by name of section

("D:\Program Files\MiKTeX 2.8\tex\latex\oberdiek\refcount.sty"
Package: refcount 2008/08/11 v3.1 Data extraction from references (HO)
)
("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\gettitlestring.sty"
Package: gettitlestring 2009/12/18 v1.3 Cleanup title references (HO)
)
\c@section@level=\count192
)
LaTeX Info: Redefining \ref on input line 14.
LaTeX Info: Redefining \pageref on input line 14.
LaTeX Info: Redefining \nameref on input line 14.

("D:\Documents and Settings\xp\Desktop\final\slide_bidipresentation.out")
("D:\Documents and Settings\xp\Desktop\final\slide_bidipresentation.out")
\@outlinefile=\write3
Package xepersian Info: “You have not specified any font for the Latin texts 
of the document and so the default TeX fonts will be used for the Latin texts o
f the document. If you would like to have any other font as the font of the Lat
in texts, then please specify a font for the Latin texts of the document by usi
ng \setlatintextfont CS, and then try to run xelatex on your document again” 
on input line 14.
\c@zf@famc@lmroman10-regular=\count193
 fontspec Info: Defining font family for 'lmroman10-regular' with options [Mapp
ing=tex-text,ExternalLocation,BoldFont={lmroman10-bold},BoldItalicFont={lmroman
10-bolditalic},ItalicFont={lmroman10-italic},SmallCapsFont={lmromancaps10-regul
ar},SlantedFont={lmromanslant10-regular},BoldSlantedFont={lmromanslant10-bold}]
.

Package fontspec Info: Defining shape m/n with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape m/sc with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape bx/n with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape bx/sc with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape m/it with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape m/si with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape m/sl with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape m/sc with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape bx/sl with raw font features:
(fontspec)             mapping=tex-text;.
Package fontspec Info: Defining shape bx/sc with raw font features:
(fontspec)             mapping=tex-text;.
Package xepersian Info: “You have not specified any font for the digits in ma
ths mode and so the digits in maths mode will appear Latin. If you would like t
o have Persian digits in maths mode, then please specify a font for the digits 
in maths mode by using \setdigitfont CS, and then try to run xelatex on your do
cument again” on input line 14.

("D:\Program Files\MiKTeX 2.8\tex\generic\oberdiek\se-ascii-print.def"
File: se-ascii-print.def 2010/03/01 v1.8 stringenc: Printable ASCII characters
)
[1

]
File: gradient2.png Graphic file (type QTm)
 <use  "gradient2.png" > [2] [3]
("D:\Documents and Settings\xp\Desktop\final\slide_bidipresentation.aux") ) 
Here is how much of TeX's memory you used:
 15479 strings out of 430430
 252282 string characters out of 3189783
 381804 words of memory out of 3000000
 18369 multiletter control sequences out of 15000+200000
 3760 words of font info for 29 fonts, out of 3000000 for 9000
 14 hyphenation exceptions out of 8191
 45i,13n,62p,840b,353s stack positions out of 5000i,500n,10000p,200000b,50000s

Output written on slide_bidipresentation.pdf (3 pages).