This is XeTeX, Version 3.1415926-2.2-0.9995.2 (TeX Live 2009) (format=xelatex 2009.12.13) 17 DEC 2009 21:29 entering extended mode %&-line parsing enabled. **"thesis proposal.tex" (./thesis proposal.tex LaTeX2e <2009/09/24> Babel and hyphenation patterns for english, usenglishmax, dumylang, noh yphenation, german-x-2009-06-19, ngerman-x-2009-06-19, ancientgreek, ibycus, ar abic, basque, bulgarian, catalan, pinyin, coptic, croatian, czech, danish, dutc h, esperanto, estonian, farsi, finnish, french, galician, german, ngerman, mono greek, greek, hungarian, icelandic, indonesian, interlingua, irish, italian, ku rmanji, latin, latvian, lithuanian, mongolian, mongolian2a, bokmal, nynorsk, po lish, portuguese, romanian, russian, sanskrit, serbian, slovak, slovenian, span ish, swedish, turkish, ukenglish, ukrainian, uppersorbian, welsh, loaded. (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/xepersian-thesis.cls Document Class: xepersian-thesis 2009/01/05 v0.1 Persian thesis document class in XeLaTeX (/usr/local/texlive/2009/texmf-dist/tex/latex/base/report.cls Document Class: report 2007/10/19 v1.4h Standard LaTeX document class (/usr/local/texlive/2009/texmf-dist/tex/latex/base/size11.clo File: size11.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count80 \c@chapter=\count81 \c@section=\count82 \c@subsection=\count83 \c@subsubsection=\count84 \c@paragraph=\count85 \c@subparagraph=\count86 \c@figure=\count87 \c@table=\count88 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 )) (/usr/local/texlive/2009/texmf-dist/tex/latex/graphics/graphicx.sty Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) (/usr/local/texlive/2009/texmf-dist/tex/latex/graphics/keyval.sty Package: keyval 1999/03/16 v1.13 key=value parser (DPC) \KV@toks@=\toks14 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/graphics/graphics.sty Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) (/usr/local/texlive/2009/texmf-dist/tex/latex/graphics/trig.sty Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) (/usr/local/texlive/2009/texmf-dist/tex/latex/latexconfig/graphics.cfg File: graphics.cfg 2009/08/28 v1.8 graphics configuration of TeX Live ) Package graphics Info: Driver file: xetex.def on input line 91. (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xetex-def/xetex.def File: xetex.def 2009/11/22 v0.94 LaTeX color/graphics driver for XeTeX (RRM/JK) )) \Gin@req@height=\dimen103 \Gin@req@width=\dimen104 ) (./natbib.sty Package: natbib 1998/02/19 6.8 (PWD) \bibhang=\skip43 \bibsep=\skip44 LaTeX Info: Redefining \cite on input line 451. \c@NAT@ctr=\count89 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/amsfonts/amsfonts.sty Package: amsfonts 2009/06/22 v3.00 Basic AMSFonts support \@emptytoks=\toks15 \symAMSa=\mathgroup4 \symAMSb=\mathgroup5 LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold' (Font) U/euf/m/n --> U/euf/b/n on input line 96. ) (/usr/local/texlive/2009/texmf-dist/tex/latex/setspace/setspace.sty Package: setspace 2000/12/01 6.7 Contributed and Supported LaTeX2e package Package: `setspace' 6.7 <2000/12/01> ) (/usr/local/texlive/2009/texmf-dist/tex/latex/base/makeidx.sty Package: makeidx 2000/03/29 v1.0m Standard LaTeX package ) (/usr/local/texlive/2009/texmf-dist/tex/latex/arabi/fmultico.sty Style option: `multicol' v1.4m <92/09/04> (FMi) English documentation <92/09/04> (FMi) \mult@box=\box26 \multicol@leftmargin=\dimen105 \c@unbalance=\count90 \c@collectmore=\count91 \c@tracingmulticols=\count92 \col@number=\count93 \doublecol@number=\count94 \multicoltolerance=\count95 \multicolpretolerance=\count96 \full@width=\dimen106 \page@free=\dimen107 \premulticols=\dimen108 \postmulticols=\dimen109 \multicolsep=\skip45 \multicolbaselineskip=\skip46 \partial@page=\box27 \last@line=\box28 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/amsfonts/amssymb.sty Package: amssymb 2009/06/22 v3.00 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/amsfonts/eucal.sty Package: eucal 2009/06/22 v3.00 Euler Script fonts LaTeX Font Info: Overwriting math alphabet `\EuScript' in version `bold' (Font) U/eus/m/n --> U/eus/b/n on input line 33. ) (/usr/local/texlive/2009/texmf-dist/tex/latex/pdfsync/pdfsync.sty Package: pdfsync 2008/01/26 v1.1 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty \fancy@headwidth=\skip47 \f@ncyO@elh=\skip48 \f@ncyO@erh=\skip49 \f@ncyO@olh=\skip50 \f@ncyO@orh=\skip51 \f@ncyO@elf=\skip52 \f@ncyO@erf=\skip53 \f@ncyO@olf=\skip54 \f@ncyO@orf=\skip55 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/pstricks/pstricks.sty Package: pstricks 2008/11/26 v0.40 LaTeX wrapper for `PSTricks' (RN,HV) (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks/pstricks.tex `PSTricks' v1.31 <2009/11/27> (tvz) \pst@dima=\dimen110 \pst@dimb=\dimen111 \pst@dimc=\dimen112 \pst@dimd=\dimen113 \pst@dimg=\dimen114 \pst@dimh=\dimen115 \pst@hbox=\box29 \pst@boxg=\box30 \pst@cnta=\count97 \pst@cntb=\count98 \pst@cntc=\count99 \pst@cntd=\count100 \pst@cntg=\count101 \pst@cnth=\count102 \pst@toks=\toks16 (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xetex-pstricks/pstricks.con (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks/xdvipdfmx.con)) \psunit=\dimen116 \psxunit=\dimen117 \psyunit=\dimen118 \pslinewidth=\dimen119 \pst@customdefs=\toks17 \pslinearc=\dimen120 \everypsbox=\toks18 \psframesep=\dimen121 \pslabelsep=\dimen122 \pst@shift=\dimen123 \theoverlaybox=\box31 (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xetex-pstricks/pstricks.con (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks/xdvipdfmx.con Using PSTricks configuration for XeTeX+xdvipdfmx ))) File: pstricks.tex 2009/11/27 v1.31 `PSTricks' (tvz,hv) (/usr/local/texlive/2009/texmf-dist/tex/latex/xcolor/xcolor.sty Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK) (/usr/local/texlive/2009/texmf-dist/tex/latex/latexconfig/color.cfg File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive ) Package xcolor Info: Driver file: xetex.def on input line 225. Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337. Package xcolor Info: Model `RGB' extended on input line 1353. Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355. Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356. Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357. Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358. Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359. Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360. )) (/usr/local/texlive/2009/texmf-dist/tex/latex/animate/animate.sty Package: animate 2009/10/08 PDF animations from files and inline graphics (/usr/local/texlive/2009/texmf-dist/tex/latex/base/ifthen.sty Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC) ) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/ifpdf.sty Package: ifpdf 2009/04/10 v2.0 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in pdf mode not detected. ) (/usr/local/texlive/2009/texmf-dist/tex/latex/oberdiek/ifdraft.sty Package: ifdraft 2008/08/11 v1.3 Switch for option draft (HO) ) (/usr/local/texlive/2009/texmf-dist/tex/latex/tools/calc.sty Package: calc 2007/08/22 v4.3 Infix arithmetic (KKT,FJ) \calc@Acount=\count103 \calc@Bcount=\count104 \calc@Adimen=\dimen124 \calc@Bdimen=\dimen125 \calc@Askip=\skip56 \calc@Bskip=\skip57 LaTeX Info: Redefining \setlength on input line 76. LaTeX Info: Redefining \addtolength on input line 77. \calc@Ccount=\count105 \calc@Cskip=\skip58 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/animate/animfp.sty Package: animfp 2009/07/23 fixed point addition for animate.sty \afp@xs=\count106 \afp@xia=\count107 \afp@xib=\count108 \afp@xfa=\count109 \afp@xfb=\count110 \afp@rega=\count111 \afp@regb=\count112 \afp@regs=\count113 ) \@anim@fieldnum=\count114 \@anim@box=\box32 \@anim@tmpdima=\dimen126 \@anim@tmpdimb=\dimen127 \@anim@num=\count115 \@anim@curframe=\count116 \@anim@curframe@zb=\count117 \@anim@resize=\count118 \@anim@skipfram=\count119 \@anim@mulframecnt=\count120 \@anim@@tmlnfile=\read1 \@anim@tmpcnt=\count121 \@anim@curlayer=\count122 \@anim@lineno=\count123 \@anim@begin=\toks19 \@anim@end=\toks20 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/pstricks-add/pstricks-add.sty Package: pstricks-add 2009/03/17 v. 0.13 package wrapper for pstricks-add.tex ( hv) (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks-add/pstricks-add.tex (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks/pst-plot.tex (/usr/local/texlive/2009/texmf-dist/tex/generic/multido/multido.tex v1.41, 2004/05/18 \multido@count=\count124 \multidocount=\count125 \multido@stuff=\toks21 ) v1.04, 2009/06/08) (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks/pst-node.tex v1.01, 2008/11/26 \psrow=\count126 \pscol=\count127 \psmatrixcnt=\count128 \psrowsep=\skip59 \pscolsep=\skip60 ) (/usr/local/texlive/2009/texmf-dist/tex/generic/pst-3d/pst-3d.tex (/usr/local/texlive/2009/texmf-dist/tex/generic/xkeyval/pst-xkey.tex File: pst-xkey.tex 2005/11/25 v1.6 PSTricks specialization of xkeyval (HA) (/usr/local/texlive/2009/texmf-dist/tex/latex/xkeyval/xkeyval.sty Package: xkeyval 2008/08/13 v2.6a package option processing (HA) (/usr/local/texlive/2009/texmf-dist/tex/generic/xkeyval/xkeyval.tex \XKV@toks=\toks22 \XKV@tempa@toks=\toks23 \XKV@depth=\count129 File: xkeyval.tex 2008/08/13 v2.6a key=value parser (HA) ))) `PST-3d' v1.00, 2005/09/03 (tvz)) (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks-add/pst-fp.tex `pst-fp' v0.04, 2009/11/24 (hv) \pstFP@xs=\count130 \pstFP@xia=\count131 \pstFP@xib=\count132 \pstFP@xfa=\count133 \pstFP@xfb=\count134 \pstFP@rega=\count135 \pstFP@regb=\count136 \pstFP@regs=\count137 \pstFP@times=\count138 ) (/usr/local/texlive/2009/texmf-dist/tex/generic/pst-math/pst-math.tex `pst-math' v0.23 , (CJ,hv)) `pstricks-add' v3.36, 2009/11/14 (dr,hv) \pst@dimm=\dimen128 \pst@dimn=\dimen129 \pst@dimo=\dimen130 \pst@dimp=\dimen131 \pst@cntm=\count139 \pst@cntn=\count140 \pst@cnto=\count141 \pst@cntp=\count142 \@zero=\count143 \pstRadUnit=\dimen132 \pstRadUnitInv=\dimen133 \psLoopIndex=\count144 \pshooklength=\dimen134 \pshookwidth=\dimen135 \@digitcounter=\count145 \psk@subticksize=\dimen136 \pst@xticksizeA=\dimen137 \pst@xticksizeB=\dimen138 \pst@xticksizeC=\dimen139 \pst@yticksizeA=\dimen140 \pst@yticksizeB=\dimen141 \pst@yticksizeC=\dimen142 \psk@llx=\dimen143 \psk@lly=\dimen144 \psk@urx=\dimen145 \psk@ury=\dimen146 \pst@xunit=\dimen147 \pst@yunit=\dimen148 \linecnt=\count146 \chart@ColorIndex=\dimen149 \chart@ColorStep=\dimen150 \pst@chartHeight=\dimen151 \pst@chartStackDepth=\dimen152 \pst@chartStackWidth=\dimen153 \chart@Toggle=\count147 ) File: pstricks-add.tex 2009/11/14 v3.36 `PSTricks-add' (hv) (/usr/local/texlive/2009/texmf-dist/tex/generic/pstricks-add/pst-fp.tex) File: pst-fp.tex 2009/11/14 v3.36 `PST-fp' (hv) ) (/usr/local/texlive/2009/texmf-dist/tex/latex/multido/multido.sty Package: multido 2004/05/17 package wrapper for PSTricks `multido.tex', (HV/RN) ) (/usr/local/texlive/2009/texmf-dist/tex/latex/fancybox/fancybox.sty Package: fancybox 2000/09/19 1.3 Style option: `fancybox' v1.3 <2000/09/19> (tvz) \@fancybox=\box33 \shadowsize=\dimen154 \@Sbox=\box34 \do@VerbBox=\toks24 \the@fancyput=\toks25 \this@fancyput=\toks26 \EndVerbatimTokens=\toks27 \Verbatim@Outfile=\write3 \Verbatim@Infile=\read2 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Package: fancyvrb 2008/02/07 Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz) \FV@CodeLineNo=\count148 \FV@InFile=\read3 \FV@TabBox=\box35 \c@FancyVerbLine=\count149 \FV@StepNumber=\count150 \FV@OutFile=\write4 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/bigfoot/perpage.sty Package: perpage 2006/07/15 1.12 Reset/sort counters per page \c@abspage=\count151 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/tools/verbatim.sty Package: verbatim 2003/08/22 v1.5q LaTeX2e package for verbatim enhancements \every@verbatim=\toks28 \verbatim@line=\toks29 \verbatim@in@stream=\read4 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/hyperref/hyperref.sty Package: hyperref 2009/12/15 v6.79p Hypertext links for LaTeX (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/ifvtex.sty Package: ifvtex 2008/11/04 v1.4 Switches for detecting VTeX and its modes (HO) Package ifvtex Info: VTeX not detected. ) (/usr/local/texlive/2009/texmf-dist/tex/generic/ifxetex/ifxetex.sty Package: ifxetex 2009/01/23 v0.5 Provides ifxetex conditional ) (/usr/local/texlive/2009/texmf-dist/tex/latex/oberdiek/hycolor.sty Package: hycolor 2009/10/02 v1.5 Code for color options of hyperref/bookmark (H O) (/usr/local/texlive/2009/texmf-dist/tex/latex/oberdiek/xcolor-patch.sty Package: xcolor-patch 2009/10/02 xcolor patch )) \@linkdim=\dimen155 \Hy@linkcounter=\count152 \Hy@pagecounter=\count153 (/usr/local/texlive/2009/texmf-dist/tex/latex/hyperref/pd1enc.def File: pd1enc.def 2009/12/15 v6.79p Hyperref: PDFDocEncoding definition (HO) ) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/etexcmds.sty Package: etexcmds 2007/12/12 v1.2 Prefix for e-TeX command names (HO) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/infwarerr.sty Package: infwarerr 2007/09/09 v1.2 Providing info/warning/message (HO) ) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. ) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/intcalc.sty Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO) ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xetexconfig/hyperref.cfg File: hyperref.cfg 2008/07/11 v1.2 hyperref configuration for XeLaTeX ) (/usr/local/texlive/2009/texmf-dist/tex/latex/oberdiek/kvoptions.sty Package: kvoptions 2009/12/08 v3.6 Keyval support for LaTeX options (HO) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty Package: kvsetkeys 2009/07/30 v1.5 Key value parser with default handler suppor t (HO) )) Package hyperref Info: Option `colorlinks' set `true' on input line 2913. Package hyperref Info: Hyper figures OFF on input line 3024. Package hyperref Info: Link nesting OFF on input line 3029. Package hyperref Info: Hyper index ON on input line 3032. Package hyperref Info: Plain pages OFF on input line 3039. Package hyperref Info: Backreferencing OFF on input line 3044. Implicit mode ON; LaTeX internals redefined Package hyperref Info: Bookmarks ON on input line 3240. (/usr/local/texlive/2009/texmf-dist/tex/latex/ltxmisc/url.sty \Urlmuskip=\muskip10 Package: url 2006/04/12 ver 3.3 Verb mode for urls, etc. ) LaTeX Info: Redefining \url on input line 3477. (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/bitset.sty Package: bitset 2007/09/28 v1.0 Data type bit set (HO) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/bigintcalc.sty Package: bigintcalc 2007/11/11 v1.1 Expandable big integer calculations (HO) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty Package: pdftexcmds 2009/09/23 v0.6 LuaTeX support for pdfTeX utility functions (HO) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/ifluatex.sty Package: ifluatex 2009/04/17 v1.2 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. ) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/ltxcmds.sty Package: ltxcmds 2009/08/05 v1.0 Some LaTeX kernel commands for general use (HO ) ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: pdfTeX >= 1.30 not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. ))) \Fld@menulength=\count154 \Field@Width=\dimen156 \Fld@charsize=\dimen157 \Field@toks=\toks30 Package hyperref Info: Hyper figures OFF on input line 4437. Package hyperref Info: Link nesting OFF on input line 4442. Package hyperref Info: Hyper index ON on input line 4445. Package hyperref Info: backreferencing OFF on input line 4452. Package hyperref Info: Link coloring ON on input line 4455. Package hyperref Info: Link coloring with OCG OFF on input line 4462. Package hyperref Info: PDF/A mode OFF on input line 4467. (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/atbegshi.sty Package: atbegshi 2009/12/02 v1.10 At begin shipout hook (HO) ) \Hy@abspage=\count155 \c@Item=\count156 \c@Hfootnote=\count157 ) *hyperref using default driver hxetex* (/usr/local/texlive/2009/texmf-dist/tex/latex/hyperref/hxetex.def File: hxetex.def 2009/12/15 v6.79p Hyperref driver for XeTeX (/usr/local/texlive/2009/texmf-dist/tex/latex/hyperref/puenc.def File: puenc.def 2009/12/15 v6.79p Hyperref: PDF Unicode definition (HO) ) \pdfm@box=\box36 \c@Hy@AnnotLevel=\count158 \HyField@AnnotCount=\count159 \Fld@listcount=\count160 \c@bookmark@seq@number=\count161 (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/rerunfilecheck.sty Package: rerunfilecheck 2009/12/10 v1.0 Checksum based rerun checks on auxiliar y files (HO) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/atveryend.sty Package: atveryend 2009/12/09 v1.2 Hooks at very end of document (HO) Package atveryend Info: \enddocument detected (standard). ) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/uniquecounter.sty Package: uniquecounter 2009/09/11 v1.0 Provides unlimited unique counter (HO) ) Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 3 26. ) \Hy@SectionHShift=\skip61 ) (/usr/local/texlive/2009/texmf-dist/tex/latex/geometry/geometry.sty Package: geometry 2008/12/21 v4.2 Page Geometry \Gm@cnth=\count162 \Gm@cntv=\count163 \c@Gm@tempcnt=\count164 \Gm@bindingoffset=\dimen158 \Gm@wd@mp=\dimen159 \Gm@odd@mp=\dimen160 \Gm@even@mp=\dimen161 \Gm@dimlist=\toks31 (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xetexconfig/geometry.cfg)) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/xepersian.sty Package: xepersian 2010/03/01 v1.0.4 Persian typesetting in XeLa TeX (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/bidi.sty Package: bidi 2010/03/01 v1.0.4 Bidirectional typesetting in XeL aTeX bidi package (Support for bidirectional typesetting with XeLaTeX) Description: A convenient interface for typesetting bidirectional texts with XeLaTeX. The package includes adaptations for use with many other commonly-used packages. (Also works with pdfLaTeX, though in this case its usefulness is doubtful). Copyright © 2009-2010 Vafa Khalighi v1.0.4, , 2010/03/01 License: LaTeX Project Public License, version 1.3c or higher (your choice) Home: http://developer.berlios.de/projects/bidi/ Location on CTAN: /macros/xetex/latex/bidi \n@everypar=\toks32 (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/footnote-bidi.def File: footnote-bidi.def 2010/03/01 v0.4 footnote macros for bidi package ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/color-bidi.def File: color-bidi.def 2010/03/01 v0.1 adaptations for color package LaTeX Info: Redefining \color on input line 23. ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/xcolor-bidi.def File: xcolor-bidi.def 2010/03/01 v0.1 adaptations for xcolor package LaTeX Info: Redefining \color on input line 22. LaTeX Info: Redefining \bidicolor on input line 65. ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/graphicx-bidi.def File: graphicx-bidi.def 2010/03/01 v0.3 adaptations for graphicx package ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/hyperref-bidi.def File: hyperref-bidi.def 2010/03/01 v0.2 adaptations for hyperref package ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/fancyhdr-bidi.def File: fancyhdr-bidi.def 2010/03/01 v0.2 adaptations for fancyhdr package ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/pstricks-bidi.def File: pstricks-bidi.def 2010/03/01 v0.1 adaptations for pstricks package ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/bidi/report-bidi.def File: report-bidi.def 2010/03/01 v0.2 adaptations for standard report class )) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/fontspec/fontspec.sty Package: fontspec 2008/08/09 v1.18 Advanced font selection for XeLaTeX \c@zf@newff=\count165 \c@zf@index=\count166 \c@zf@script=\count167 \c@zf@language=\count168 (/usr/local/texlive/2009/texmf-dist/tex/latex/base/fontenc.sty Package: fontenc 2005/09/27 v1.99g Standard LaTeX package (/usr/local/texlive/2009/texmf-dist/tex/xelatex/euenc/eu1enc.def File: eu1enc.def 2008/03/08 v0.1d Experimental unicode font encoding ) LaTeX Font Info: Try loading font information for EU1+lmr on input line 100. (/usr/local/texlive/2009/texmf-dist/tex/xelatex/euenc/eu1lmr.fd File: eu1lmr.fd 2007/01/14 v1.3 Font defs for Latin Modern )) LaTeX Info: Redefining \itshape on input line 1163. LaTeX Info: Redefining \slshape on input line 1166. LaTeX Info: Redefining \scshape on input line 1169. LaTeX Info: Redefining \upshape on input line 1172. fontspec.cfg loaded. (/usr/local/texlive/2009/texmf-dist/tex/xelatex/fontspec/fontspec.cfg)) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/xepersian-persiancal. sty Package: xepersian-persiancal \XePersian@i=\count169 \XePersian@y=\count170 \XePersian@m=\count171 \XePersian@d=\count172 \XePersian@latini=\count173 \XePersian@persiani=\count174 \XePersian@latinii=\count175 \XePersian@persianii=\count176 \XePersian@latiniii=\count177 \XePersian@persianiii=\count178 \XePersian@latiniv=\count179 \XePersian@persianiv=\count180 \XePersian@latinv=\count181 \XePersian@persianv=\count182 \XePersian@latinvi=\count183 \XePersian@persianvi=\count184 \XePersian@latinvii=\count185 \XePersian@persianvii=\count186 \XePersian@latinviii=\count187 \XePersian@persianviii=\count188 \XePersian@latinix=\count189 \XePersian@persianix=\count190 \XePersian@latinx=\count191 \XePersian@persianx=\count192 \XePersian@latinxi=\count193 \XePersian@persianxi=\count194 \XePersian@latinxii=\count195 \XePersian@persianxii=\count196 \XePersian@persianxiii=\count197 \XePersian@temp=\count198 \XePersian@temptwo=\count199 \XePersian@tempthree=\count200 \XePersian@yModHundred=\count201 \XePersian@thirtytwo=\count202 \XePersian@dn=\count203 \XePersian@sn=\count204 \XePersian@mminusone=\count205 ) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/xepersian-mathsdigits pec.sty Package: xepersian-mathsdigitspec 2009/04/22 v1.0.1 Unicode Persian maths digit s in XeLaTeX (Author: Vafa Khalighi) ) (/usr/local/texlive/2009/texmf-dist/tex/latex/etoolbox/etoolbox.sty Package: etoolbox 2009/08/06 v1.8 e-TeX tools for LaTeX (/usr/local/texlive/2009/texmf-dist/tex/latex/etex-pkg/etex.sty Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count206 )) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/footnote-bidi-xepersi an.def) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/hyperref-xepersian.de f) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/report-xepersian.def) (/usr/local/texlive/2009/texmf-dist/tex/xelatex/xepersian/xepersian-thesis-xepe rsian.def)) Package Fancyhdr Warning: \fancyhead's `E' option without twoside option is use less on input line 56. Package Fancyhdr Warning: \fancyhead's `E' option without twoside option is use less on input line 59. \c@zf@famc@XB Zar=\count207 Package fontspec Info: Defining font family for 'XB Zar' with options [Script=P ersian,Mapping=parsidigits,Scale=1.2] on input line 77. Package fontspec Info: Defining font family for 'XB Zar' with options [Scale=1] on input line 78. Package xepersian-mathsdigitspec Info: Defining the default Persian maths digit s font as 'XB Zar' on input line 78. \symOPERATORS=\mathgroup6 LaTeX Font Info: Overwriting symbol font `OPERATORS' in version `bold' (Font) EU1/XBZar(1)/m/n --> EU1/XBZar(1)/bx/n on input line 78 . LaTeX Font Info: Redeclaring math alphabet \mathit on input line 78. LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal' (Font) OT1/cmr/m/it --> EU1/XBZar(1)/m/it on input line 78. LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold' (Font) OT1/cmr/bx/it --> EU1/XBZar(1)/m/it on input line 78. LaTeX Font Info: Redeclaring math alphabet \mathbf on input line 78. LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal' (Font) OT1/cmr/bx/n --> EU1/XBZar(1)/bx/n on input line 78. LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold' (Font) OT1/cmr/bx/n --> EU1/XBZar(1)/bx/n on input line 78. \c@zf@famc@Euclid=\count208 Package fontspec Info: Defining font family for 'Euclid' with options [Mapping= tex-text,Scale=1.1] on input line 79. LaTeX Font Info: Font shape `EU1/Euclid(0)/m/n' will be (Font) scaled to size 11.00006pt on input line 79. Package fontspec Info: Defining font family for 'Euclid' with options [Mapping= tex-text,Scale=1.2] on input line 80. \c@zf@famc@IranNastaliq=\count209 Package fontspec Info: Defining font family for 'IranNastaliq' with options [Sc ript=Persian,Mapping=parsidigits,Scale=2] on input line 82. Package fontspec Info: Could not resolve font IranNastaliq/B (it might not exis t) on input line 82. Package fontspec Info: Could not resolve font IranNastaliq/I (it might not exis t) on input line 82. Package fontspec Info: Could not resolve font IranNastaliq/BI (it might not exi st) on input line 82. \c@zf@famc@B Compset=\count210 Package fontspec Info: Defining font family for 'B Compset' with options [Scrip t=Persian,Mapping=parsidigits,Scale=1.3] on input line 83. \c@zf@famc@Linux Libertine O=\count211 Package fontspec Info: Defining font family for 'Linux Libertine O' with option s [Mapping=tex-text,Scale=1.2] on input line 84. ! Undefined control sequence. l.88 \numberwithin {equation}{section} ? r OK, entering \nonstopmode... ! XePersian Error: Missing \begin{document}. Oops! either you have done something wrong or it is a xepersian bug. Please fir st produce a similar file without using XePersian package and then compile it w ith xelatex, if you got the same error, then please study the Persian translati on of “The not so Short Introduction to LaTeX” by MEHDI OMIDALI, otherwise please report the error with a minimal tex file which shows the error to the Au thor of XePersian. Type H for immediate help. ... l.88 \numberwithin{e quation}{section} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Undefined control sequence. l.89 \numberwithin {table}{section} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Font shape `EU1/Euclid(0)/m/n' will be (Font) scaled to size 12.04506pt on input line 90. \c@thm=\count212 \@indexfile=\write5 \openout5 = `"thesis proposal.idx"'. Writing index file "thesis proposal".idx (./thesis proposal.aux (./Chapters/Chapter01.aux) (./Chapters/appendix1.aux)) \openout1 = `"thesis proposal.aux"'. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for PU/pdf/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. LaTeX Font Info: Checking defaults for EU1/lmr/m/n on input line 98. LaTeX Font Info: ... okay on input line 98. Configuring pdfsync \PDFSYNC@ut=\write6 \openout6 = `"thesis proposal.pdfsync"'. \PDFSYNCf@li@=\count213 \PDFSYNC@rder=\count214 **** pdfsync.sty: Synchronizing at \everypar \PDFSYNCeveryp@r=\toks33 **** pdfsync.sty: Synchronizing at \everymath \PDFSYNCeverym@th=\toks34 **** pdfsync.sty: Synchronizing at \everyhbox \PDFSYNCeveryhb@x=\toks35 **** pdfsync.sty: Synchronizing at \everyvbox \PDFSYNCeveryvb@x=\toks36 **** pdfsync.sty: started Package hyperref Info: Link coloring ON on input line 98. (/usr/local/texlive/2009/texmf-dist/tex/latex/hyperref/nameref.sty Package: nameref 2009/12/08 v2.34 Cross-referencing by name of section (/usr/local/texlive/2009/texmf-dist/tex/latex/oberdiek/refcount.sty Package: refcount 2008/08/11 v3.1 Data extraction from references (HO) ) (/usr/local/texlive/2009/texmf-dist/tex/generic/oberdiek/gettitlestring.sty Package: gettitlestring 2009/12/08 v1.0 Cleanup strings for title referencing ( HO) ! Missing \endcsname inserted. \immediate l.133 \ProcessKeyvalOptions *\relax The control sequence marked should not appear between \csname and \endcsname. ! Missing \endcsname inserted. \immediate l.133 \ProcessKeyvalOptions *\relax The control sequence marked should not appear between \csname and \endcsname. ! Missing \endcsname inserted. \immediate l.133 \ProcessKeyvalOptions *\relax The control sequence marked should not appear between \csname and \endcsname. ! Missing \endcsname inserted. \immediate l.133 \ProcessKeyvalOptions *\relax The control sequence marked should not appear between \csname and \endcsname. ! Missing \endcsname inserted. \immediate l.133 \ProcessKeyvalOptions *\relax The control sequence marked should not appear between \csname and \endcsname. ! Missing \endcsname inserted. \immediate l.133 \ProcessKeyvalOptions *\relax The control sequence marked should not appear between \csname and \endcsname. ) \c@section@level=\count215 ) LaTeX Info: Redefining \ref on input line 98. LaTeX Info: Redefining \pageref on input line 98. (./thesis proposal.out) (./thesis proposal.out) \@outlinefile=\write7 ! Use of \pdfmdfivesum doesn't match its definition. \pdf@filemdfivesum {->\pdfmdfivesum file{ l.98 \begin{document} If you say, e.g., `\def\a1{...}', then you must always put `1' after `\a', since control sequence names are made up of letters only. The macro here has not been followed by the required stuff, so I'm ignoring it. ! Extra }, or forgotten \endgroup. \ReFiCh@@RerunFileCheck ...{\ReFiCh@CheckSum {#2}} \ifx #1\ReFiCh@Separator \... l.98 \begin{document} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. \openout7 = `"thesis proposal.out"'. \AtBeginShipoutBox=\box37 *geometry detected driver: pdftex* -------------------- Geometry parameters paper: a4paper landscape: -- twocolumn: -- twoside: -- asymmetric: -- h-parts: 89.62709pt, 0.7\paperwidth , 89.6271pt (default) v-parts: 101.40665pt, 0.7\paperheight , 152.11pt (default) hmarginratio: 1:1 vmarginratio: 2:3 lines: -- heightrounded: -- bindingoffset: 0.0pt truedimen: -- includehead: -- includefoot: -- includemp: -- driver: pdftex -------------------- Page layout dimensions and switches \paperwidth 597.50787pt \paperheight 845.04684pt \textwidth 426.79134pt \textheight 625.96062pt \oddsidemargin 0.0pt \evensidemargin 17.3571pt \topmargin 7.11317pt \headheight 12.5pt \headsep 25.0pt \footskip 30.0pt \marginparwidth 50.0pt \marginparsep 10.0pt \columnsep 10.0pt \skip\footins 10.0pt plus 4.0pt minus 2.0pt \hoffset 0.0pt \voffset 0.0pt \mag 1000 (1in=72.27pt, 1cm=28.45pt) ----------------------- LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 13.13995pt on input line 98. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\char' on input line 118. Package hyperref Warning: Token not allowed in a PDF string (PDFDocEncoding): (hyperref) removing `\char' on input line 118. [1 ] File: logo.pdf Graphic file (type QTm) LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 29.85593pt on input line 118. LaTeX Font Info: Font shape `EU1/XBZar(0)/bx/n' will be (Font) scaled to size 29.85593pt on input line 118. LaTeX Font Info: Font shape `EU1/BCompset(0)/bx/n' will be (Font) scaled to size 32.34407pt on input line 118. LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 14.39996pt on input line 118. LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 17.27994pt on input line 118. LaTeX Font Info: Font shape `EU1/XBZar(0)/bx/n' will be (Font) scaled to size 17.27994pt on input line 118. LaTeX Font Info: Font shape `EU1/BCompset(0)/bx/n' will be (Font) scaled to size 18.72003pt on input line 118. LaTeX Font Info: Font shape `EU1/XBZar(0)/bx/n' will be (Font) scaled to size 14.39996pt on input line 118. [2] LaTeX Font Info: Font shape `EU1/IranNastaliq(0)/m/n' will be (Font) scaled to size 21.9pt on input line 124. LaTeX Font Info: Font shape `EU1/IranNastaliq(0)/m/n' will be (Font) scaled to size 28.79999pt on input line 125. LaTeX Font Info: Font shape `EU1/IranNastaliq(0)/m/n' will be (Font) scaled to size 49.76001pt on input line 131. LaTeX Font Info: Font shape `EU1/BCompset(0)/m/n' will be (Font) scaled to size 18.72003pt on input line 136. [3] LaTeX Font Info: Font shape `EU1/BCompset(0)/bx/n' will be (Font) scaled to size 15.60004pt on input line 150. LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 11.99997pt on input line 150. LaTeX Font Info: Font shape `EU1/BCompset(0)/m/n' will be (Font) scaled to size 14.23502pt on input line 152. Missing character: There is no R in font B Compset/ICU:script=arab,mapping=pars idigits,! Missing character: There is no a in font B Compset/ICU:script=arab,mapping=pars idigits,! Missing character: There is no o in font B Compset/ICU:script=arab,mapping=pars idigits,! LaTeX Font Info: Font shape `EU1/BCompset(0)/bx/n' will be (Font) scaled to size 14.23502pt on input line 186. LaTeX Font Info: Font shape `EU1/BCompset(0)/m/it' will be (Font) scaled to size 14.23502pt on input line 186. [4] [5] Package Fancyhdr Warning: \fancyhead's `E' option without twoside option is use less on input line 190. (./thesis proposal.toc LaTeX Font Info: Try loading font information for U+msa on input line 2. (/usr/local/texlive/2009/texmf-dist/tex/latex/amsfonts/umsa.fd File: umsa.fd 2009/06/22 v3.00 AMS symbols A ) LaTeX Font Info: Try loading font information for U+msb on input line 2. (/usr/local/texlive/2009/texmf-dist/tex/latex/amsfonts/umsb.fd File: umsb.fd 2009/06/22 v3.00 AMS symbols B ) LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 10.95pt on input line 2. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 8.0pt on input line 2. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 6.0pt on input line 2. ) \tf@toc=\write8 \openout8 = `"thesis proposal.toc"'. [6 ] \openout2 = `Chapters/Chapter01.aux'. (./Chapters/Chapter01.tex فصل 1. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\-command' on input line 4. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\f@family' on input line 4. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\-command' on input line 4. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\font@name' on input line 4. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\EU1/BCompset(0)/m/n/10.95' on input line 4 . LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 24.88794pt on input line 4. LaTeX Font Info: Font shape `EU1/XBZar(0)/bx/n' will be (Font) scaled to size 24.88794pt on input line 4. LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 9.59998pt on input line 14. LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 10.79997pt on input line 14. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 9.0pt on input line 14. LaTeX Font Info: Font shape `EU1/XBZar(1)/m/n' will be (Font) scaled to size 5.0pt on input line 14. LaTeX Font Info: Font shape `EU1/XBZar(0)/m/n' will be (Font) scaled to size 7.19998pt on input line 14. LaTeX Font Info: Font shape `EU1/Euclid(0)/m/n' will be (Font) scaled to size 9.90005pt on input line 14. [1 ] Missing character: There is no R in font B Compset/ICU:script=arab,mapping=pars idigits,! Missing character: There is no a in font B Compset/ICU:script=arab,mapping=pars idigits,! Missing character: There is no o in font B Compset/ICU:script=arab,mapping=pars idigits,! LaTeX Font Info: Font shape `EU1/Euclid(0)/m/it' will be (Font) scaled to size 12.04506pt on input line 49. Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 14.13321pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [2] Overfull \vbox (3.1603pt too high) has occurred while \output is active [] Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 14.13321pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [3] ! Undefined control sequence. l.121 m\left({\boldsymbol {\beta},\boldsymbol\gamma} \right)=\beta_0+\beta_1x... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.121 m\left({\boldsymbol{\beta},\boldsymbol \gamma} \right)=\beta_0+\beta_1x... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 16.28188pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [4] ! Undefined control sequence. \boldsymbol l.130 $\boldsymbol {\beta}=\left( {\beta_0,\ldots,\beta_p} \right)^{\prime}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.132 $\boldsymbol {\gamma}=\left( { \gamma_1,\ldots,\gamma_K}\right)^{\prime}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.135 $m\left( {x;\boldsymbol {\beta,\gamma}} \right)$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.146 ...i=1}^{n}{ \{ y_i-m\left( {x_i;\boldsymbol {\beta,\gamma}} \right) \}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.146 ...\right) \}^2}+\lambda_{\gamma}\boldsymbol {\gamma^{\prime}\gamma}$$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.148 $\boldsymbol {\beta}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.150 $\boldsymbol \gamma$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.163 $\boldsymbol {d}_i=\left( {d_{i1},\ldots,d_{iT}} \right)^{\prime}$. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.165 ${\boldsymbol {Y}}=\left( {y_1,\ldots,y_n} \right)^{\prime}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.167 $${\boldsymbol {X}}= {\left(\begin{array}{cccc}1 & x_1 & \ldots & x_1^... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.168 $$\boldsymbol {Z}={\left( \begin{array}{ccc} {\left({x_1-\kappa_1}\rig... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.170 $\boldsymbol {D}=\left( {\boldsymbol{d}_1,\ldots,\boldsymbol{d}_n} \ri... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.170 $\boldsymbol{D}=\left( {\boldsymbol {d}_1,\ldots,\boldsymbol{d}_n} \ri... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.170 ...eft( {\boldsymbol{d}_1,\ldots,\boldsymbol {d}_n} \right)^{\prime}$. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.172 $\boldsymbol {X}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 14.07048pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [5] ! Undefined control sequence. l.175 \boldsymbol {Y=X\boldsymbol{\beta}+Z\boldsymbol{\gamma}+Du+\boldsymbol{... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.175 \boldsymbol{Y=X\boldsymbol {\beta}+Z\boldsymbol{\gamma}+Du+\boldsymbol{... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.175 ...symbol{Y=X\boldsymbol{\beta}+Z\boldsymbol {\gamma}+Du+\boldsymbol{\e... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.175 ...beta}+Z\boldsymbol{\gamma}+Du+\boldsymbol {\epsilon}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.181 {\boldsymbol {\Sigma}_\gamma\equiv\sigma_\gamma^2\boldsymbol{\boldsy... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.181 ...a}_\gamma\equiv\sigma_\gamma^2\boldsymbol {\boldsymbol{ I}}_K} &{ \t... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.181 ...uiv\sigma_\gamma^2\boldsymbol{\boldsymbol { I}}_K} &{ \texttt{\rl{ک... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \ttfamily \rl {که در آن} l.181 ...l{ I}}_K} &{ \texttt{\rl{که در آن}} }\hfill & {\boldsymbol{\ga... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.181 ...rl{که در آن}}}\hfill & {\boldsymbol {\gamma}\sim\left({{0,\bol... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.181 ...ldsymbol{\gamma}\sim\left({{0,\boldsymbol {\Sigma}}_{\gamma}}\right)... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.182 {\boldsymbol {\Sigma}_u\equiv\sigma_u^2{\boldsymbol{I}}_T} & {\textt... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.182 ...bol{\Sigma}_u\equiv\sigma_u^2{\boldsymbol {I}}_T} & {\texttt{\rl{ک... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \ttfamily \rl {که در آن} l.182 ...ol{I}}_T} & {\texttt{\rl{که در آن}} }\hfill & {\boldsymbol{u}\... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.182 ...rl{که در آن}}}\hfill & {\boldsymbol {u}\sim\left( { 0, \boldsy... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.182 ...\boldsymbol{u}\sim\left( { 0, \boldsymbol {\Sigma}_u} \right)} \hfil... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.183 {\boldsymbol {\Sigma}_{\epsilon}\equiv\sigma_{\epsilon}^2{\boldsymbo... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.183 ...lon}\equiv\sigma_{\epsilon}^2{\boldsymbol I}_n}&{ \texttt{\rl{که ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \ttfamily \rl {که در آن} l.183 ...mbol I}_n}&{ \texttt{\rl{که در آن}} } \hfill & {\boldsymbol{\e... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.183 ...l{که در آن}}} \hfill & {\boldsymbol {\epsilon} \sim \left( {{0... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.183 ...bol{\epsilon} \sim \left( {{0,\boldsymbol {\Sigma}}_{\epsilon}} \rig... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.190 $\boldsymbol {Du}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.192 $\boldsymbol {Z\boldsymbol{\gamma}}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.192 $\boldsymbol{Z\boldsymbol {\gamma}}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.194 $$\mathrm{Var}\left({\boldsymbol {Y}} \right) \equiv \boldsymbol{V}=\bo... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.194 ...boldsymbol{Y}} \right) \equiv \boldsymbol {V}=\boldsymbol{Z\Sigma_\g... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.194 ...\right) \equiv \boldsymbol{V}=\boldsymbol {Z\Sigma_\gamma Z^{\prime}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.194 ...a_\gamma Z^{\prime}+D\Sigma}_u\boldsymbol {D^{\prime}+\Sigma_\epsilo... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.204 \boldsymbol {\hat{\beta}}=\left( {\boldsymbol{X^{\prime}V}^{-1}\boldsym... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.204 \boldsymbol{\hat{\beta}}=\left( {\boldsymbol {X^{\prime}V}^{-1}\boldsym... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.204 ...{\boldsymbol{X^{\prime}V}^{-1}\boldsymbol {X}} \right) ^{-1}\boldsym... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.204 ...}\boldsymbol{X}} \right) ^{-1}\boldsymbol {X^{\prime}V}^{-1}\boldsym... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.204 ...}\boldsymbol{X^{\prime}V}^{-1}\boldsymbol {Y} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.210 { \boldsymbol {\hat{\gamma}}= \boldsymbol{\Sigma}_\gamma\boldsymbol{... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.210 { \boldsymbol{\hat{\gamma}}= \boldsymbol {\Sigma}_\gamma\boldsymbol{... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.210 ...}}= \boldsymbol{\Sigma}_\gamma\boldsymbol { Z^{\prime}V}^{-1}\left( ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.210 ...bol{ Z^{\prime}V}^{-1}\left( {\boldsymbol {Y-X}\boldsymbol{\hat{\bet... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.210 ...}^{-1}\left( {\boldsymbol{Y-X}\boldsymbol {\hat{\beta}}} \right) ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.211 { \boldsymbol {\hat{u}}=\boldsymbol{\Sigma}_u\boldsymbol{D^{\prime}V... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.211 { \boldsymbol{\hat{u}}=\boldsymbol {\Sigma}_u\boldsymbol{D^{\prime}V... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.211 ...\hat{u}}=\boldsymbol{\Sigma}_u\boldsymbol {D^{\prime}V}^{-1}\left( {... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.211 ...mbol{D^{\prime}V}^{-1}\left( {\boldsymbol {Y-X}\boldsymbol{\hat{\bet... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.211 ...}^{-1}\left( {\boldsymbol{Y-X}\boldsymbol {\hat{\beta}}} \right) ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.219 \bar{y_t}={\boldsymbol {\bar{X}}_{t}{\boldsymbol\beta}+\boldsymbol{\bar... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.219 ..._t}={\boldsymbol{\bar{X}}_{t}{\boldsymbol \beta}+\boldsymbol{\bar{Z}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.219 ...bar{X}}_{t}{\boldsymbol\beta}+\boldsymbol {\bar{Z}}_t\boldsymbol{\ga... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.219 ...l\beta}+\boldsymbol{\bar{Z}}_t\boldsymbol {\gamma}}+{u}_t The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.223 $\boldsymbol {\bar{x}}_t$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.225 $\boldsymbol {\bar{z}}_t$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.232 $\boldsymbol {\bar{x}}_t$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.234 $\boldsymbol {\bar{z}}_t$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.244 $u_t=\bar{\boldsymbol {d}}_t\boldsymbol{u}=\boldsymbol{e}_t\boldsymbol{u}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.244 $u_t=\bar{\boldsymbol{d}}_t\boldsymbol {u}=\boldsymbol{e}_t\boldsymbol{u}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.244 ...oldsymbol{d}}_t\boldsymbol{u}=\boldsymbol {e}_t\boldsymbol{u}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.244 ...boldsymbol{u}=\boldsymbol{e}_t\boldsymbol {u}$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.246 $\boldsymbol {e}_t$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 14.07048pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [6] ! Undefined control sequence. l.249 \bar{y_t}={\boldsymbol {\bar{X}}_{t}{\boldsymbol\beta}+\boldsymbol{\bar... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.249 ..._t}={\boldsymbol{\bar{X}}_{t}{\boldsymbol \beta}+\boldsymbol{\bar{Z}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.249 ...bar{X}}_{t}{\boldsymbol\beta}+\boldsymbol {\bar{Z}}_t\boldsymbol{\ga... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.249 ...l\beta}+\boldsymbol{\bar{Z}}_t\boldsymbol {\gamma}}+\boldsymbol{e}_t... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.249 ...bar{Z}}_t\boldsymbol{\gamma}}+\boldsymbol {e}_t\hat{\boldsymbol{u}}_t The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.249 ...\gamma}}+\boldsymbol{e}_t\hat{\boldsymbol {u}}_t The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Font Info: Try loading font information for EU1+lmss on input line 282 . (/usr/local/texlive/2009/texmf-dist/tex/xelatex/euenc/eu1lmss.fd File: eu1lmss.fd 2007/01/14 v1.3 Font defs for Latin Modern ) ! Undefined control sequence. \boldsymbol l.301 $\boldsymbol {W=\left({Z,D}\right)}$، The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.302 $\boldsymbol {\boldsymbol\omega=\left({\boldsymbol\gamma^{\prime},u^{\p... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.302 $\boldsymbol{\boldsymbol \omega=\left({\boldsymbol\gamma^{\prime},u^{\p... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.302 ...mbol{\boldsymbol\omega=\left({\boldsymbol \gamma^{\prime},u^{\prime}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.303 $\boldsymbol {\bar{w}}_t=\left({\boldsymbol{\bar{z}}_t,{\boldsymbol{e}}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.303 $\boldsymbol{\bar{w}}_t=\left({\boldsymbol {\bar{z}}_t,{\boldsymbol{e}}... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.303 ...left({\boldsymbol{\bar{z}}_t,{\boldsymbol {e}}_t} \right)$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.305 $$\boldsymbol \Sigma_w=\left(\begin{array}{cc}\boldsymbol\Sigma_\gamma ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.305 ...igma_w=\left(\begin{array}{cc}\boldsymbol \Sigma_\gamma & 0 \\0 & \b... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.305 ...symbol\Sigma_\gamma & 0 \\0 & \boldsymbol \Sigma_u\end{array}\right)$$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...{y}_t-\bar{y}_t} \right)^2}\}=\boldsymbol {c}_t\left({\boldsymbol{X^... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...)^2}\}=\boldsymbol{c}_t\left({\boldsymbol {X^{\prime}V}^{-1}\boldsym... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...{\boldsymbol{X^{\prime}V}^{-1}\boldsymbol X} \right)^{-1}\boldsymbo... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...-1}\boldsymbol X} \right)^{-1}\boldsymbol c_t^{\prime}+\boldsymbol{... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...^{-1}\boldsymbol c_t^{\prime}+\boldsymbol {\bar{w}}_t\boldsymbol\Sig... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...\prime}+\boldsymbol{\bar{w}}_t\boldsymbol \Sigma_w\left({\boldsymbol... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...}}_t\boldsymbol\Sigma_w\left({\boldsymbol {I-W^{\prime}V}^{-1}\bolds... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...boldsymbol{I-W^{\prime}V}^{-1}\boldsymbol {W\Sigma}_w}\right)\bolds... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.308 ...boldsymbol {W\Sigma}_w}\right)\boldsymbol {\bar{w}}_t^{\prime} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 14.07048pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [7] LaTeX Font Info: Font shape `EU1/XBZar(0)/bx/n' will be (Font) scaled to size 13.13995pt on input line 318. ! Undefined control sequence. l.329 \boldsymbol {Y}^{\ast}=\boldsymbol{X}\hat{\boldsymbol{\beta}}+\boldsymb... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.329 \boldsymbol{Y}^{\ast}=\boldsymbol {X}\hat{\boldsymbol{\beta}}+\boldsymb... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.329 ...{Y}^{\ast}=\boldsymbol{X}\hat{\boldsymbol {\beta}}+\boldsymbol{Z}\bo... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.329 ...ol{X}\hat{\boldsymbol{\beta}}+\boldsymbol {Z}\boldsymbol{\gamma}^{\a... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.329 ...dsymbol{\beta}}+\boldsymbol{Z}\boldsymbol {\gamma}^{\ast}+\boldsymbo... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.329 ...{Z}\boldsymbol{\gamma}^{\ast}+\boldsymbol {Du}^\ast+\boldsymbol{\eps... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. l.329 ...}^{\ast}+\boldsymbol{Du}^\ast+\boldsymbol {\epsilon}^\ast The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.333 $\boldsymbol {\gamma}^\ast$، The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.334 $\boldsymbol {u}^\ast$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \boldsymbol l.336 $\boldsymbol {\epsilon}^\ast$ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 14.07048pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [8] Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 15.32289pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [9] Underfull \hbox (badness 10000) in paragraph at lines 399--419 [][] [] Underfull \hbox (badness 10000) in paragraph at lines 399--419 [][] [] Underfull \hbox (badness 10000) in paragraph at lines 399--419 [][] [] Underfull \hbox (badness 10000) in paragraph at lines 399--419 [][] [] Underfull \hbox (badness 10000) in paragraph at lines 399--419 [][] [] Underfull \hbox (badness 10000) in paragraph at lines 399--419 [][] [] Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 15.16833pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [10]) Package Fancyhdr Warning: \headheight is too small (12.5pt): Make it at least 13.59999pt. We now make it that large for the rest of the document. This may cause the page layout to be inconsistent, however. [11] \openout2 = `Chapters/appendix1.aux'. No file Chapters/appendix1.tex. (./thesis proposal.bbl LaTeX Font Info: Try loading font information for EU1+lmtt on input line 14. (/usr/local/texlive/2009/texmf-dist/tex/xelatex/euenc/eu1lmtt.fd File: eu1lmtt.fd 2007/01/14 v1.3 Font defs for Latin Modern ) Underfull \hbox (badness 2495) in paragraph at lines 36--44 [][][]\EU1/Euclid(0)/m/n/10.95 J Opsomer, G Claeskens, M Ranalli, and G Kauerma nn. Non- [] Underfull \hbox (badness 2781) in paragraph at lines 36--44 \EU1/Euclid(0)/m/n/10.95 parametric small area estimation using penalized splin e regression. [] Underfull \hbox (badness 3792) in paragraph at lines 36--44 \EU1/Euclid(0)/m/it/10.95 Journal of the Royal Statistical Society: Series B\EU 1/Euclid(0)/m/n/10.95 , 70(1):265–286, [] ) [12 ] No file "thesis proposal".ind. LaTeX Font Info: Font shape `EU1/Euclid(0)/m/n' will be (Font) scaled to size 15.84007pt on input line 229. LaTeX Font Info: Font shape `EU1/Euclid(0)/bx/n' will be (Font) scaled to size 15.84007pt on input line 229. LaTeX Font Info: Font shape `EU1/Euclid(0)/bx/n' will be (Font) scaled to size 12.04506pt on input line 229. [13] File: logo.pdf Graphic file (type QTm) LaTeX Font Info: Font shape `EU1/Euclid(0)/m/n' will be (Font) scaled to size 13.20007pt on input line 233. LaTeX Font Info: Font shape `EU1/Euclid(0)/bx/n' will be (Font) scaled to size 13.20007pt on input line 233. [14] Package atveryend Info: Empty hook `AfterLastShipout' on input line 235. (./thesis proposal.aux (./Chapters/Chapter01.aux) (./Chapters/appendix1.aux)) Package atveryend Info: Executing hook `AtVeryEndDocument' on input line 235. ! Use of \pdfmdfivesum doesn't match its definition. \pdf@filemdfivesum {->\pdfmdfivesum file{ l.235 \end{document} If you say, e.g., `\def\a1{...}', then you must always put `1' after `\a', since control sequence names are made up of letters only. The macro here has not been followed by the required stuff, so I'm ignoring it. ! Extra }, or forgotten \endgroup. \AtVeryEnd@AtVeryEndDocumentHook ...jobname .out}} \ifx \x \ReFiCh@Separator ... l.235 \end{document} I've deleted a group-closing symbol because it seems to be spurious, as in `$x}$'. But perhaps the } is legitimate and you forgot something else, as in `\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. Package rerunfilecheck Info: File `"thesis proposal".out' has not changed. (rerunfilecheck) Checksum: "thesis proposal".out. ) (\end occurred inside a group at level 2) ### simple group (level 2) entered at line 218 ({) ### simple group (level 1) entered at line 215 ({) ### bottom level Here is how much of TeX's memory you used: 13294 strings out of 494665 207820 string characters out of 3163742 396795 words of memory out of 3000000 16134 multiletter control sequences out of 15000+200000 11619 words of font info for 104 fonts, out of 3000000 for 9000 669 hyphenation exceptions out of 8191 38i,32n,59p,894b,493s stack positions out of 5000i,500n,10000p,200000b,50000s Output written on thesis proposal.pdf (20 pages).