This is LuaTeX, Version beta-0.70.2-2012052919 (TeX Live 2012/W32TeX) (format=lualatex 2012.6.18) 19 JUN 2012 03:50 restricted \write18 enabled. **"hooshyar payannameh.tex" ("./hooshyar payannameh.tex" LaTeX2e <2011/06/27> LuaTeX adaptation of babel and hyphenation patterns for engl ish, dumylang, nohyphenation, loaded. (./VThesis.cls Document Class: VThesis 2/1/2011 v0.3 Persian thesis document class in XeLaTeX for University of Tabriz theses/dissertations (c:/texlive/2011/texmf-dist/tex/latex/base/book.cls Document Class: book 2007/10/19 v1.4h Standard LaTeX document class (c:/texlive/2011/texmf-dist/tex/latex/base/bk12.clo File: bk12.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count79 \c@chapter=\count80 \c@section=\count81 \c@subsection=\count82 \c@subsubsection=\count83 \c@paragraph=\count84 \c@subparagraph=\count85 \c@figure=\count86 \c@table=\count87 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 )) \@input{commands.aux} (./commands.tex (c:/texlive/2011/texmf-dist/tex/latex/amscls/amsthm.sty Package: amsthm 2009/07/02 v2.20.1 \thm@style=\toks14 \thm@bodyfont=\toks15 \thm@headfont=\toks16 \thm@notefont=\toks17 \thm@headpunct=\toks18 \thm@preskip=\skip43 \thm@postskip=\skip44 \thm@headsep=\skip45 \dth@everypar=\toks19 ) (c:/texlive/2011/texmf-dist/tex/latex/amsfonts/amssymb.sty Package: amssymb 2009/06/22 v3.00 (c:/texlive/2011/texmf-dist/tex/latex/amsfonts/amsfonts.sty Package: amsfonts 2009/06/22 v3.00 Basic AMSFonts support \@emptytoks=\toks20 \symAMSa=\mathgroup4 \symAMSb=\mathgroup5 LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold' (Font) U/euf/m/n --> U/euf/b/n on input line 96. )) (c:/texlive/2011/texmf-dist/tex/latex/amsmath/amsmath.sty Package: amsmath 2000/07/18 v2.13 AMS math features \@mathmargin=\skip46 For additional information on amsmath, use the `?' option. (c:/texlive/2011/texmf-dist/tex/latex/amsmath/amstext.sty Package: amstext 2000/06/29 v2.01 (c:/texlive/2011/texmf-dist/tex/latex/amsmath/amsgen.sty File: amsgen.sty 1999/11/30 v2.0 \@emptytoks=\toks21 \ex@=\dimen103 )) (c:/texlive/2011/texmf-dist/tex/latex/amsmath/amsbsy.sty Package: amsbsy 1999/11/29 v1.2d \pmbraise@=\dimen104 ) (c:/texlive/2011/texmf-dist/tex/latex/amsmath/amsopn.sty Package: amsopn 1999/12/14 v2.01 operator names ) \inf@bad=\count88 LaTeX Info: Redefining \frac on input line 211. \uproot@=\count89 \leftroot@=\count90 LaTeX Info: Redefining \overline on input line 307. \classnum@=\count91 \DOTSCASE@=\count92 LaTeX Info: Redefining \ldots on input line 379. LaTeX Info: Redefining \dots on input line 382. LaTeX Info: Redefining \cdots on input line 467. \Mathstrutbox@=\box26 \strutbox@=\box27 \big@size=\dimen105 LaTeX Font Info: Redeclaring font encoding OML on input line 567. LaTeX Font Info: Redeclaring font encoding OMS on input line 568. \macc@depth=\count93 \c@MaxMatrixCols=\count94 \dotsspace@=\muskip10 \c@parentequation=\count95 \dspbrk@lvl=\count96 \tag@help=\toks22 \row@=\count97 \column@=\count98 \maxfields@=\count99 \andhelp@=\toks23 \eqnshift@=\dimen106 \alignsep@=\dimen107 \tagshift@=\dimen108 \tagwidth@=\dimen109 \totwidth@=\dimen110 \lineht@=\dimen111 \@envbody=\toks24 \multlinegap=\skip47 \multlinetaggap=\skip48 \mathdisplay@stack=\toks25 LaTeX Info: Redefining \[ on input line 2666. LaTeX Info: Redefining \] on input line 2667. ) (c:/texlive/2011/texmf-dist/tex/latex/paralist/paralist.sty Package: paralist 2002/03/18 v2.3b Extended list environments (BS) \pltopsep=\skip49 \plpartopsep=\skip50 \plitemsep=\skip51 \plparsep=\skip52 \pl@lab=\toks26 ) (c:/texlive/2011/texmf-dist/tex/latex/geometry/geometry.sty Package: geometry 2010/09/12 v5.6 Page Geometry (c:/texlive/2011/texmf-dist/tex/latex/graphics/keyval.sty Package: keyval 1999/03/16 v1.13 key=value parser (DPC) \KV@toks@=\toks27 ) (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/ifpdf.sty Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in PDF mode is detected. ) (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/ifvtex.sty Package: ifvtex 2010/03/01 v1.5 Detect VTeX and its facilities (HO) Package ifvtex Info: VTeX not detected. ) (c:/texlive/2011/texmf-dist/tex/generic/ifxetex/ifxetex.sty Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional ) \Gm@cnth=\count100 \Gm@cntv=\count101 \c@Gm@tempcnt=\count102 \Gm@bindingoffset=\dimen112 \Gm@wd@mp=\dimen113 \Gm@odd@mp=\dimen114 \Gm@even@mp=\dimen115 \Gm@layoutwidth=\dimen116 \Gm@layoutheight=\dimen117 \Gm@layouthoffset=\dimen118 \Gm@layoutvoffset=\dimen119 \Gm@dimlist=\toks28 ) (c:/texlive/2011/texmf-dist/tex/latex/graphics/graphicx.sty Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) (c:/texlive/2011/texmf-dist/tex/latex/graphics/graphics.sty Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) (c:/texlive/2011/texmf-dist/tex/latex/graphics/trig.sty Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) (c:/texlive/2011/texmf-dist/tex/latex/latexconfig/graphics.cfg File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live ) Package graphics Info: Driver file: pdftex.def on input line 91. (c:/texlive/2011/texmf-dist/tex/latex/pdftex-def/pdftex.def File: pdftex.def 2011/05/27 v0.06d Graphics/color for pdfTeX (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/infwarerr.sty Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO) ) (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/ltxcmds.sty Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO) ) (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO ) (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/ifluatex.sty Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX detected. ) Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. Package pdftexcmds Info: \pdfdraftmode found. (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/luatex-loader.sty Package: luatex-loader 2010/03/09 v0.4 Lua module loader (HO) (c:/texlive/2011/texmf-dist/scripts/oberdiek/oberdiek.luatex.lua)) \pdftexcmds@toks=\toks29 ) \Gread@gobject=\count103 )) \Gin@req@height=\dimen120 \Gin@req@width=\dimen121 ) (c:/texlive/2011/texmf-dist/tex/latex/framed/framed.sty Package: framed 2011/10/22 v 0.96: framed or shaded text with page breaks \OuterFrameSep=\skip53 \fb@frw=\dimen122 \fb@frh=\dimen123 \FrameRule=\dimen124 \FrameSep=\dimen125 ) (c:/texlive/2011/texmf-dist/tex/latex/lastpage/lastpage.sty Package: lastpage 2011/09/01 v1.2k Refers to last page's name (HMM; JPG) ) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xy.sty (c:/texlive/2011/texmf-dist/tex/generic/xypic/xy.tex Bootstrap'ing: catcodes, docmode, (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyrecat.tex) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyidioms.tex) Xy-pic version 3.8.8 <2012/05/24> Copyright (c) 1991-2011 by Kristoffer H. Rose Xy-pic is free software: see the User's Guide for details. Loading kernel: messages; fonts; allocations: state, \X@c=\dimen126 \Y@c=\dimen127 \U@c=\dimen128 \D@c=\dimen129 \L@c=\dimen130 \R@c=\dimen131 \Edge@c=\toks30 \X@p=\dimen132 \Y@p=\dimen133 \U@p=\dimen134 \D@p=\dimen135 \L@p=\dimen136 \R@p=\dimen137 \Edge@p=\toks31 \X@origin=\dimen138 \Y@origin=\dimen139 \X@xbase=\dimen140 \Y@xbase=\dimen141 \X@ybase=\dimen142 \Y@ybase=\dimen143 \X@min=\dimen144 \Y@min=\dimen145 \X@max=\dimen146 \Y@max=\dimen147 \lastobjectbox@=\box28 \zerodotbox@=\box29 \almostz@=\dimen148 direction, \d@X=\dimen149 \d@Y=\dimen150 \K@=\count104 \KK@=\count105 \Direction=\count106 \K@dXdY=\dimen151 \K@dYdX=\dimen152 \xyread@=\read1 \xywrite@=\write3 \csp@=\count107 \quotPTK@=\dimen153 utility macros; pictures: \xy, positions, \swaptoks@@=\toks32 \connectobjectbox@@=\box30 objects, \styletoks@=\toks33 decorations; kernel objects: directionals, circles, text; options; algorithms: directions, edges, connections; Xy-pic loaded) Package: xy 2012/05/24 Xy-pic version 3.8.8 (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyall.tex Xy-pic option: All features v.3.8 (c:/texlive/2011/texmf-dist/tex/generic/xypic/xycurve.tex Xy-pic option: Curve and Spline extension v.3.12 curve, \crv@cnt@=\count108 \crvpts@=\toks34 \splinebox@=\box31 \splineval@=\dimen154 \splinedepth@=\dimen155 \splinetol@=\dimen156 \splinelength@=\dimen157 circles, \L@=\dimen158 loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyframe.tex Xy-pic option: Frame and Bracket extension v.3.14 loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xycmtip.tex Xy-pic option: Computer Modern tip extension v.3.7 (c:/texlive/2011/texmf-dist/tex/generic/xypic/xytips.tex Xy-pic option: More Tips extension v.3.9 loaded) loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyline.tex Xy-pic option: Line styles extension v.3.10 \xylinethick@=\dimen159 loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyrotate.tex Xy-pic option: Rotate and Scale extension v.3.8 loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xycolor.tex Xy-pic option: Colour extension v.3.11 loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xymatrix.tex Xy-pic option: Matrix feature v.3.14 \Row=\count109 \Col=\count110 \queue@=\toks35 \queue@@=\toks36 \qcount@=\count111 \qcount@@=\count112 \matrixsize@=\count113 loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xyarrow.tex Xy-pic option: Arrow and Path feature v.3.9 path, \ar, loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xygraph.tex Xy-pic option: Graph feature v.3.11 loaded) loaded) (c:/texlive/2011/texmf-dist/tex/generic/xypic/xypdf.tex Xy-pic option: PDF driver v.1.7 Xy-pic pdf driver: `color' extension support (c:/texlive/2011/texmf-dist/tex/generic/xypic/xypdf-co.tex loaded) Xy-pic pdf driver: `curve' extension support (c:/texlive/2011/texmf-dist/tex/generic/xypic/xypdf-cu.tex loaded) Xy-pic pdf driver: `frame' extension support (c:/texlive/2011/texmf-dist/tex/generic/xypic/xypdf-fr.tex loaded) Xy-pic pdf driver: `line' extension support (c:/texlive/2011/texmf-dist/tex/generic/xypic/xypdf-li.tex loaded) Xy-pic pdf driver: `rotate' extension support (c:/texlive/2011/texmf-dist/tex/generic/xypic/xypdf-ro.tex loaded) loaded)) (c:/texlive/2011/texmf-dist/tex/latex/hyperref/hyperref.sty Package: hyperref 2012/05/13 v6.82q Hypertext links for LaTeX (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty Package: hobsub-hyperref 2012/05/28 v1.13 Bundle oberdiek, subset hyperref (HO) (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty Package: hobsub-generic 2012/05/28 v1.13 Bundle oberdiek, subset generic (HO) Package: hobsub 2012/05/28 v1.13 Construct package bundles (HO) Package hobsub Info: Skipping package `infwarerr' (already loaded). Package hobsub Info: Skipping package `ltxcmds' (already loaded). Package hobsub Info: Skipping package `ifluatex' (already loaded). Package hobsub Info: Skipping package `ifvtex' (already loaded). Package: intcalc 2007/09/27 v1.1 Expandable calculations with integers (HO) Package hobsub Info: Skipping package `ifpdf' (already loaded). Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO) Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO) Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO) Package hobsub Info: Skipping package `luatex-loader' (already loaded). Package hobsub Info: Skipping package `pdftexcmds' (already loaded). Package: pdfescape 2011/11/25 v1.13 Implements pdfTeX's escape features (HO) Package: bigintcalc 2012/04/08 v1.3 Expandable calculations on big integers (HO ) Package: bitset 2011/01/30 v1.1 Handle bit-vector datatype (HO) Package: uniquecounter 2011/01/30 v1.2 Provide unlimited unique counter (HO) ) Package hobsub Info: Skipping package `hobsub' (already loaded). Package: letltxmacro 2010/09/02 v1.4 Let assignment for LaTeX macros (HO) Package: hopatch 2012/05/28 v1.2 Wrapper for package hooks (HO) Package: xcolor-patch 2011/01/30 xcolor patch Package: atveryend 2011/06/30 v1.8 Hooks at the very end of document (HO) Package atveryend Info: \enddocument detected (standard20110627). Package: atbegshi 2011/10/05 v1.16 At begin shipout hook (HO) Package: refcount 2011/10/16 v3.4 Data extraction from label references (HO) Package: hycolor 2011/01/30 v1.7 Color options for hyperref/bookmark (HO) ) (c:/texlive/2011/texmf-dist/tex/latex/oberdiek/kvoptions.sty Package: kvoptions 2011/06/30 v3.11 Key value format for package options (HO) ) \@linkdim=\dimen160 \Hy@linkcounter=\count114 \Hy@pagecounter=\count115 (c:/texlive/2011/texmf-dist/tex/latex/hyperref/pd1enc.def File: pd1enc.def 2012/05/13 v6.82q Hyperref: PDFDocEncoding definition (HO) ) \Hy@SavedSpaceFactor=\count116 (c:/texlive/2011/texmf-dist/tex/latex/latexconfig/hyperref.cfg File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive ) Package hyperref Info: Option `colorlinks' set `true' on input line 3941. Package hyperref Info: Hyper figures OFF on input line 4062. Package hyperref Info: Link nesting OFF on input line 4067. Package hyperref Info: Hyper index ON on input line 4070. Package hyperref Info: Plain pages OFF on input line 4077. Package hyperref Info: Backreferencing OFF on input line 4082. Package hyperref Info: Implicit mode ON; LaTeX internals redefined. Package hyperref Info: Bookmarks ON on input line 4300. \c@Hy@tempcnt=\count117 (c:/texlive/2011/texmf-dist/tex/latex/url/url.sty \Urlmuskip=\muskip11 Package: url 2006/04/12 ver 3.3 Verb mode for urls, etc. ) LaTeX Info: Redefining \url on input line 4653. \Fld@menulength=\count118 \Field@Width=\dimen161 \Fld@charsize=\dimen162 Package hyperref Info: Hyper figures OFF on input line 5773. Package hyperref Info: Link nesting OFF on input line 5778. Package hyperref Info: Hyper index ON on input line 5781. Package hyperref Info: backreferencing OFF on input line 5788. Package hyperref Info: Link coloring ON on input line 5791. Package hyperref Info: Link coloring with OCG OFF on input line 5798. Package hyperref Info: PDF/A mode OFF on input line 5803. LaTeX Info: Redefining \ref on input line 5843. LaTeX Info: Redefining \pageref on input line 5847. \Hy@abspage=\count119 \c@Item=\count120 \c@Hfootnote=\count121 ) Package hyperref Message: Driver (autodetected): hpdftex. (c:/texlive/2011/texmf-dist/tex/latex/hyperref/hpdftex.def File: hpdftex.def 2012/05/13 v6.82q Hyperref driver for pdfTeX \Fld@listcount=\count122 \c@bookmark@seq@number=\count123 (c:/texlive/2011/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty Package: rerunfilecheck 2011/04/15 v1.7 Rerun checks for auxiliary files (HO) Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 2 82. ) \Hy@SectionHShift=\skip54 ) (c:/texlive/2011/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty \fancy@headwidth=\skip55 \f@ncyO@elh=\skip56 \f@ncyO@erh=\skip57 \f@ncyO@olh=\skip58 \f@ncyO@orh=\skip59 \f@ncyO@elf=\skip60 \f@ncyO@erf=\skip61 \f@ncyO@olf=\skip62 \f@ncyO@orf=\skip63 ) (c:/texlive/2011/texmf-dist/tex/latex/tocbibind/tocbibind.sty Package: tocbibind 2010/10/13 v1.5k extra ToC listings Package tocbibind Info: The document has chapter divisions on input line 50. Package tocbibind Note: Using chapter style headings, unless overridden. ) (c:/texlive/2011/texmf-dist/tex/latex/base/makeidx.sty Package: makeidx 2000/03/29 v1.0m Standard LaTeX package ) \@indexfile=\write4 Writing index file "hooshyar payannameh".idx (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/xepersian.sty Package: xepersian 2012/06/05 v11.140 Persian typesetting in XeLaTeX (c:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec.sty Package: fontspec 2012/05/06 v2.2b Advanced font selection for XeLaTeX/LuaLaTeX (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/expl3.sty (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3names.sty (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3bootstrap.sty Package: l3bootstrap 2011/12/29 v3110 L3 Experimental bootstrap code (c:/texlive/2011/texmf-dist/tex/generic/oberdiek/luatex.sty Package: luatex 2010/03/09 v0.4 LuaTeX basic definition package (HO) (c:/texlive/2011/texmf-dist/tex/latex/etex-pkg/etex.sty Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB) \et@xins=\count124 ) \LuT@AllocAttribute=\count277 \LuT@AllocCatcodeTable=\count278 \CatcodeTableStack=\count279 \CatcodeTableIniTeX=\catcodetable1 \CatcodeTableString=\catcodetable3 \CatcodeTableOther=\catcodetable5 \CatcodeTableLaTeX=\catcodetable7 )) Package: l3names 2012/03/04 v3494 L3 Experimental namespace for primitives ) Package: expl3 2012/04/23 v3570 L3 Experimental code bundle wrapper (c:/texlive/2011/texmf-dist/tex/latex/graphics/color.sty Package: color 2005/11/14 v1.0j Standard LaTeX Color (DPC) (c:/texlive/2011/texmf-dist/tex/latex/latexconfig/color.cfg File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive ) Package color Info: Driver file: pdftex.def on input line 130. ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3basics.sty Package: l3basics 2012/03/04 v3491 L3 Experimental basic definitions ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3expan.sty Package: l3expan 2012/02/26 v3460 L3 Experimental argument expansion ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3tl.sty Package: l3tl 2012/03/04 v3490 L3 Experimental token lists ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3seq.sty Package: l3seq 2012/03/04 v3490 L3 Experimental sequences and stacks ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3int.sty Package: l3int 2012/03/04 v3490 L3 Experimental integers \c_max_int=\count280 \l_tmpa_int=\count281 \l_tmpb_int=\count282 \l_tmpc_int=\count283 \g_tmpa_int=\count284 \g_tmpb_int=\count285 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3quark.sty Package: l3quark 2012/02/12 v3384 L3 Experimental quarks ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3prg.sty Package: l3prg 2012/03/04 v3490 L3 Experimental control structures \g_prg_map_int=\count286 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3clist.sty Package: l3clist 2012/03/04 v3490 L3 Experimental comma separated lists ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3token.sty Package: l3token 2012/03/04 v3491 L3 Experimental token manipulation ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3prop.sty Package: l3prop 2012/03/04 v3490 L3 Experimental property lists ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3msg.sty Package: l3msg 2012/04/23 v3568 L3 Experimental messages ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3file.sty Package: l3file 2012/03/09 v3520 L3 Experimental file and I/O operations \l_iow_stream_int=\count287 \l_iow_line_length_int=\count288 \l_iow_target_length_int=\count289 \l_iow_current_line_int=\count290 \l_iow_current_word_int=\count291 \l_iow_current_indentation_int=\count292 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3skip.sty Package: l3skip 2012/03/05 v3499 L3 Experimental dimensions and skips \l_tmpa_dim=\dimen256 \l_tmpb_dim=\dimen257 \l_tmpc_dim=\dimen258 \g_tmpa_dim=\dimen259 \g_tmpb_dim=\dimen260 \l_tmpa_skip=\skip256 \l_tmpb_skip=\skip257 \l_tmpc_skip=\skip258 \g_tmpa_skip=\skip259 \g_tmpb_skip=\skip260 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3keys.sty Package: l3keys 2012/03/03 v3487 L3 Experimental key-value interfaces \g_keyval_level_int=\count293 \l_keys_choice_int=\count294 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3fp.sty Package: l3fp 2012/03/04 v3490 L3 Experimental floating-point operations \c_one_hundred_million=\count295 \c_five_hundred_million=\count296 \c_one_thousand_million=\count297 \c_fp_pi_by_four_decimal_int=\count298 \c_fp_pi_by_four_extended_int=\count299 \c_fp_pi_decimal_int=\count300 \c_fp_pi_extended_int=\count301 \c_fp_two_pi_decimal_int=\count302 \c_fp_two_pi_extended_int=\count303 \l_fp_count_int=\count304 \l_fp_div_offset_int=\count305 \l_fp_exp_integer_int=\count306 \l_fp_exp_decimal_int=\count307 \l_fp_exp_extended_int=\count308 \l_fp_exp_exponent_int=\count309 \l_fp_input_a_sign_int=\count310 \l_fp_input_a_integer_int=\count311 \l_fp_input_a_decimal_int=\count312 \l_fp_input_a_exponent_int=\count313 \l_fp_input_b_sign_int=\count314 \l_fp_input_b_integer_int=\count315 \l_fp_input_b_decimal_int=\count316 \l_fp_input_b_exponent_int=\count317 \l_fp_input_a_extended_int=\count318 \l_fp_input_b_extended_int=\count319 \l_fp_mul_a_i_int=\count320 \l_fp_mul_a_ii_int=\count321 \l_fp_mul_a_iii_int=\count322 \l_fp_mul_a_iv_int=\count323 \l_fp_mul_a_v_int=\count324 \l_fp_mul_a_vi_int=\count325 \l_fp_mul_b_i_int=\count326 \l_fp_mul_b_ii_int=\count327 \l_fp_mul_b_iii_int=\count328 \l_fp_mul_b_iv_int=\count329 \l_fp_mul_b_v_int=\count330 \l_fp_mul_b_vi_int=\count331 \l_fp_mul_output_int=\count332 \l_fp_output_sign_int=\count333 \l_fp_output_integer_int=\count334 \l_fp_output_decimal_int=\count335 \l_fp_output_exponent_int=\count336 \l_fp_output_extended_int=\count337 \l_fp_round_position_int=\count338 \l_fp_round_target_int=\count339 \l_fp_split_sign_int=\count340 \l_fp_internal_int=\count341 \l_fp_trig_octant_int=\count342 \l_fp_trig_sign_int=\count343 \l_fp_trig_decimal_int=\count344 \l_fp_trig_extended_int=\count345 \l_fp_internal_dim=\dimen261 \l_fp_internal_skip=\skip261 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3box.sty Package: l3box 2012/03/04 v3490 L3 Experimental boxes \l_tmpb_box=\box256 \l_box_top_dim=\dimen262 \l_box_bottom_dim=\dimen263 \l_box_left_dim=\dimen264 \l_box_right_dim=\dimen265 \l_box_top_new_dim=\dimen266 \l_box_bottom_new_dim=\dimen267 \l_box_left_new_dim=\dimen268 \l_box_right_new_dim=\dimen269 \l_box_internal_box=\box257 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3coffins.sty Package: l3coffins 2012/03/03 v3482 L3 Experimental coffin code layer \l_coffin_internal_box=\box258 \l_coffin_internal_dim=\dimen270 \l_coffin_offset_x_dim=\dimen271 \l_coffin_offset_y_dim=\dimen272 \l_coffin_x_dim=\dimen273 \l_coffin_y_dim=\dimen274 \l_coffin_x_prime_dim=\dimen275 \l_coffin_y_prime_dim=\dimen276 \l_coffin_Depth_dim=\dimen277 \l_coffin_Height_dim=\dimen278 \l_coffin_TotalHeight_dim=\dimen279 \l_coffin_Width_dim=\dimen280 \c_empty_coffin=\box259 \l_coffin_aligned_coffin=\box260 \l_coffin_aligned_internal_coffin=\box261 \l_coffin_bounding_shift_dim=\dimen281 \l_coffin_left_corner_dim=\dimen282 \l_coffin_right_corner_dim=\dimen283 \l_coffin_bottom_corner_dim=\dimen284 \l_coffin_top_corner_dim=\dimen285 \l_coffin_scaled_total_height_dim=\dimen286 \l_coffin_scaled_width_dim=\dimen287 \l_coffin_display_coffin=\box262 \l_coffin_display_coord_coffin=\box263 \l_coffin_display_pole_coffin=\box264 \l_coffin_display_offset_dim=\dimen288 \l_coffin_display_x_dim=\dimen289 \l_coffin_display_y_dim=\dimen290 ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3color.sty Package: l3color 2011/09/07 v2776 L3 Experimental colour support ) (c:/texlive/2011/texmf-dist/tex/latex/l3kernel/l3luatex.sty Package: l3luatex 2012/02/09 v3355 L3 Experimental LuaTeX-specific functions \g_cctab_allocate_int=\count346 \g_cctab_stack_int=\count347 \c_code_cctab=\catcodetable9 )) (c:/texlive/2011/texmf-dist/tex/latex/l3packages/xparse/xparse.sty Package: xparse 2012/04/23 v3570 L3 Experimental document command parser \l_xparse_current_arg_int=\count348 \l_xparse_m_args_int=\count349 \l_xparse_mandatory_args_int=\count350 \l_xparse_processor_int=\count351 \l_xparse_v_nesting_int=\count352 ) (c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/luaotfload.sty Package: luaotfload 2012/05/28 v1.27 OpenType layout system (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase.sty Package: luatexbase 2010/10/06 v0.3 Module utilities for LuaTeX (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-compat.sty Package: luatexbase-compat 2010/10/10 v0.3 Compatibility tools for LuaTeX ) (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-loader.sty Package: luatexbase-loader 2010/10/10 v0.3 Lua module loader for LuaTeX (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase.loader.lua)) (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-regs.sty Package: luatexbase-regs 2010/10/10 v0.3 Registers allocation for LuaTeX ) (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-attr.sty Package: luatexbase-attr 2011/05/21 v0.31 Attributes allocation for LuaTeX (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/attr.lua)) (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-cctb.sty Package: luatexbase-cctb 2010/10/10 v0.3 Catcodetable allocation for LuaTeX (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/cctb.lua) \lltxb@catcodetable@alloc=\count353 \CatcodeTableIniTeX=\luatexcatcodetable1 \CatcodeTableString=\luatexcatcodetable3 \CatcodeTableOther=\luatexcatcodetable5 \CatcodeTableLaTeX=\luatexcatcodetable7 \CatcodeTableLaTeXAtLetter=\luatexcatcodetable9 \CatcodeTableExpl=\luatexcatcodetable11 ) (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-mcb.sty Package: luatexbase-mcb 2010/10/10 v0.3 Callback management for LuaTeX (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-modutils.sty Package: luatexbase-modutils 2010/10/10 v0.3 Module utilities for LuaTeX (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/modutils.lua)) (c:/texlive/2011/texmf-dist/tex/luatex/luatexbase/mcb.lua) Lua module: luatexbase-mcb 2010/05/12 0.2 register several functions in a callb ack )) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs.lua) Lua module: lualibs 2011/01/20 0.96 Lua additional functions. (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-string.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-lpeg.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-boolean.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-number.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-math.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-table.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-aux.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-io.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-os.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-file.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-md5.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-dir.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-unicode.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-utils.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-dimen.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-url.lua) (c:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-set.lua) (c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/luaotfload.lua) Lua module: luaotfload 2012/05/28 1.27 OpenType layout system. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- luat-dum.lua.(using cache: C:/Documents and Settings/Administrator/.texlive2012 /texmf-var/luatex-cache/generic) luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- luat-ovr.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- data-con.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-ini.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- node-dum.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- node-inj.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-tfm.lua. luatexbase.attributes["otfl@state"] = 1 luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-cid.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-ott.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-map.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-otf.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-otd.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-oti.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-otb.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-otn.lua. luatexbase.attributes["otfl@markbase"] = 2 luatexbase.attributes["otfl@markmark"] = 3 luatexbase.attributes["otfl@markdone"] = 4 luatexbase.attributes["otfl@cursbase"] = 5 luatexbase.attributes["otfl@curscurs"] = 6 luatexbase.attributes["otfl@cursdone"] = 7 luatexbase.attributes["otfl@kernpair"] = 8 luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-ota.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-otc.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-def.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-xtx.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-dum.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-nms.lua. luaotfload: loading file c:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl- font-clr.lua. Module luatexbase-mcb info: creating 'luaotfload.patch_font' type 4 Module luatexbase-mcb info: inserting 'luaotfload.pre_linebreak_filter' (luatexbase-mcb) at position 1 in 'pre_linebreak_filter' Module luatexbase-mcb info: inserting 'luaotfload.hpack_filter' (luatexbase-mcb) at position 1 in 'hpack_filter' Module luatexbase-mcb info: resetting callback 'define_font' Module luatexbase-mcb info: inserting 'luaotfload.define_font' (luatexbase-mcb) at position 1 in 'define_font' Module luatexbase-mcb info: inserting 'luaotfload.find_vf_file' (luatexbase-mcb) at position 1 in 'find_vf_file' Module luatexbase-mcb info: inserting 'unicodemath.set_sscale_diments' (luatexbase-mcb) at position 1 in 'luaotfload.patch_font' ) (c:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec.lua) Lua module: fontspec 2009/12/04 2 Advanced font selection for LuaLaTeX. Module luatexbase-mcb info: inserting 'fontspec.set_capheight' (luatexbase-mcb) at position 2 in 'luaotfload.patch_font' \l_fontspec_script_int=\count354 \l_fontspec_language_int=\count355 \l_fontspec_strnum_int=\count356 \l_fontspec_tmpa_dim=\dimen291 \l_fontspec_tmpb_dim=\dimen292 \l_fontspec_tmpc_dim=\dimen293 Variant \tl_gset:cV already defined; not changing it on line 66 (c:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec-patches.sty Package: fontspec-patches 2012/05/06 v2.2b Advanced font selection for XeLaTeX/ LuaLaTeX (c:/texlive/2011/texmf-dist/tex/latex/base/fixltx2e.sty Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX LaTeX Info: Redefining \em on input line 420. LaTeX Info: The control sequence `\[' is already robust on input line 471. LaTeX Info: The control sequence `\]' is already robust on input line 472. ) LaTeX Info: Redefining \em on input line 22. LaTeX Info: Redefining \emph on input line 29. LaTeX Info: Redefining \- on input line 32. ************************************************* * LaTeX warning: "xparse/redefine-command" * * Redefining document command \oldstylenums with arg. spec. 'm' on line 107. ************************************************* ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \liningnums with arg. spec. 'm' on line 111. ................................................. ) (c:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec-luatex.sty Package: fontspec-luatex 2012/05/06 v2.2b Advanced font selection for XeLaTeX/L uaLaTeX (c:/texlive/2011/texmf-dist/tex/latex/base/fontenc.sty Package: fontenc 2005/09/27 v1.99g Standard LaTeX package (c:/texlive/2011/texmf-dist/tex/latex/euenc/eu2enc.def File: eu2enc.def 2010/05/27 v0.1h Experimental Unicode font encodings ) LaTeX Font Info: Try loading font information for EU2+lmr on input line 100. (c:/texlive/2011/texmf-dist/tex/latex/euenc/eu2lmr.fd File: eu2lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern ) luaotfload | load font: auto-selecting default features for script: dflt (was l atn)(load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luate x-cache/generic/fonts/otf/temp-lmroman10-regular.lua)) (c:/texlive/2011/texmf-dist/tex/xelatex/xunicode/xunicode.sty File: xunicode.sty 2011/09/09 v0.981 provides access to latin accents and many other characters in Unicode lower plane (c:/texlive/2011/texmf-dist/tex/latex/tipa/t3enc.def File: t3enc.def 2001/12/31 T3 encoding luaotfload | load font: auto-selecting default features for script: dflt (was l atn)(load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luate x-cache/generic/fonts/otf/temp-lmromanslant10-regular.lua) luaotfload | load font: auto-selecting default features for script: dflt (was l atn)(load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luate x-cache/generic/fonts/otf/temp-lmroman10-italic.lua) luaotfload | load font: auto-selecting default features for script: dflt (was l atn)(load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luate x-cache/generic/fonts/otf/temp-lmroman10-bold.lua) LaTeX Font Info: Try loading font information for EU2+lmss on input line 357 . (c:/texlive/2011/texmf-dist/tex/latex/euenc/eu2lmss.fd File: eu2lmss.fd 2009/10/30 v1.6 Font defs for Latin Modern ) luaotfload | load font: auto-selecting default features for script: dflt (was l atn)(load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luate x-cache/generic/fonts/otf/temp-lmsans10-regular.lua)) \tipaTiiicode=\count357 \tipasavetokens=\toks37 \tipachecktokens=\toks38 ) ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \fontspec with arg. spec. 'O{}m' on line 42. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmainfont with arg. spec. 'O{}m' on line 46. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsansfont with arg. spec. 'O{}m' on line 50. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmonofont with arg. spec. 'O{}m' on line 54. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathrm with arg. spec. 'O{}m' on line 62. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setboldmathrm with arg. spec. 'O{}m' on line 65. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsf with arg. spec. 'O{}m' on line 68. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathtt with arg. spec. 'O{}m' on line 71. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfamily with arg. spec. 'mO{}m' on line 87. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontface with arg. spec. 'mO{}m' on line 90. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defaultfontfeatures with arg. spec. 'm' on line . 94. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \addfontfeatures with arg. spec. 'm' on line 110. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontfeature with arg. spec. 'mm' on line 121. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newAATfeature with arg. spec. 'mmmm' on line 128. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newICUfeature with arg. spec. 'mmm' on line 135. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeature with arg. spec. 'mm' on line . 162. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \aliasfontfeatureoption with arg. spec. 'mmm' on . line 167. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontscript with arg. spec. 'mm' on line 172. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \newfontlanguage with arg. spec. 'mm' on line 195. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \DeclareFontsExtensions with arg. spec. 'm' on . line 214. ................................................. Variant \prop_gput:cnV already defined; not changing it on line 489 Variant \prop_gput:cnx already defined; not changing it on line 490 \l_fontspec_tmp_int=\count358 LaTeX Info: Redefining \itshape on input line 1819. LaTeX Info: Redefining \slshape on input line 1823. LaTeX Info: Redefining \scshape on input line 1827. LaTeX Info: Redefining \upshape on input line 1831. (c:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec.cfg))) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/xepersian-persiancal.sty Package: xepersian-persiancal 2010/07/25 v0.1 provides Persian calendar \XePersian@i=\count359 \XePersian@y=\count360 \XePersian@m=\count361 \XePersian@d=\count362 \XePersian@latini=\count363 \XePersian@persiani=\count364 \XePersian@latinii=\count365 \XePersian@persianii=\count366 \XePersian@latiniii=\count367 \XePersian@persianiii=\count368 \XePersian@latiniv=\count369 \XePersian@persianiv=\count370 \XePersian@latinv=\count371 \XePersian@persianv=\count372 \XePersian@latinvi=\count373 \XePersian@persianvi=\count374 \XePersian@latinvii=\count375 \XePersian@persianvii=\count376 \XePersian@latinviii=\count377 \XePersian@persianviii=\count378 \XePersian@latinix=\count379 \XePersian@persianix=\count380 \XePersian@latinx=\count381 \XePersian@persianx=\count382 \XePersian@latinxi=\count383 \XePersian@persianxi=\count384 \XePersian@latinxii=\count385 \XePersian@persianxii=\count386 \XePersian@persianxiii=\count387 \XePersian@temp=\count388 \XePersian@temptwo=\count389 \XePersian@tempthree=\count390 \XePersian@yModHundred=\count391 \XePersian@thirtytwo=\count392 \XePersian@dn=\count393 \XePersian@sn=\count394 \XePersian@mminusone=\count395 ) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/xepersian-mathsdigitspec.sty Package: xepersian-mathsdigitspec 2012/01/01 v1.0.2 Unicode Persian maths digit s in XeLaTeX ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathbf with arg. spec. 'm' on line 109. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathit with arg. spec. 'm' on line 117. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathrm with arg. spec. 'm' on line 125. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathsf with arg. spec. 'm' on line 133. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \new@mathtt with arg. spec. 'm' on line 141. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathsfdigitfont with arg. spec. 'O{}m' on line . 171. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setmathttdigitfont with arg. spec. 'O{}m' on line . 176. ................................................. ) (c:/texlive/2011/texmf-dist/tex/latex/bidi/bidi.sty Package: bidi 2012/06/05 v11.157 Bidirectional typesetting in plain TeX and LaT eX bidi package (Support for bidirectional typesetting in plain TeX and LaTeX) Description: A convenient interface for typesetting bidirectional texts in plain TeX and LaTeX. The package includes adaptations for use with many other commonly-used packages. Copyright © 2009–2012 Vafa Khalighi v11.157, 2012/06/05 License: LaTeX Project Public License, version 1.3c or higher (your choice) Location on CTAN: /macros/latex/contrib/bidi (c:/texlive/2011/texmf-dist/tex/generic/iftex/iftex.sty Package: iftex 2010/07/25 v0.2 Provides if(tex) conditional for PDFTeX, XeTeX, and LuaTeX ) (c:/texlive/2011/texmf-dist/tex/latex/bidi/biditools.sty Package: biditools 2012/05/01 v0.1 Programming tools for bidi package ) (c:/texlive/2011/texmf-dist/tex/latex/bidi/luatex-bidi.def File: luatex-bidi.def 2010/07/25 v0.1 bidi adaptations for LuaTeX engine (c:/texlive/2011/texmf-dist/tex/latex/bidi/footnote-luatex-bidi.def File: footnote-luatex-bidi.def 2010/07/25 v0.1 bidi footnote macros for LuaTeX engine )) (c:/texlive/2011/texmf-dist/tex/latex/bidi/loadingorder-bidi.def File: loadingorder-bidi.def 2012/01/01 v0.8a making sure that bidi is the last package loaded )) ! LaTeX Error: Unknown option `RTLdocument' for package `bidi'. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.24 \edef \xepersianinfo{% The option `RTLdocument' was not declared in package `bidi', perhaps you misspelled its name. Try typing to proceed. xepersian package (Persian for LaTeX over XeTeX) Description: The package supports Persian typesetting, using fonts provided in the distribution. Copyright © 2008–2012 Vafa Khalighi v11.140, 2012/06/05 License: LaTeX Project Public License, version 1.3c or higher (your choice) Location on CTAN: /macros/xetex/latex/xepersian ! Undefined control sequence. l.57 \ifnum\xepersian@shellescape =1\relax The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. = l.57 \ifnum\xepersian@shellescape= 1\relax A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \settextfont with arg. spec. 'O{}m' on line 75. ................................................. (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-regular.lua) fontspec: script 'arab' exists in font 'PersianModern-Regular' fontspec: language 'FAR' for script 'arab' exists in font 'PersianModern-Regula r' ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* \g_fontspec_family_persian-modern-regular_int=\count396 ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-bold.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-italic.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-oblique.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-bolditalic.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-boldoblique.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-regular(0)' created for font . 'persian-modern-regular' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,BoldFont={p ersian-modern-bold},BoldItalicFont={persian-modern-bolditalic},ItalicFont={pers ian-modern-italic},SlantedFont={persian-modern-oblique},BoldSlantedFont={persia n-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"file:persian-modern-regular:mode=node;script=arab;language=FAR;" . . * 'bold' with NFSS spec.: . <->"file:persian-modern-bold:mode=node;script=arab;language=FAR;" . . * 'italic' with NFSS spec.: . <->"file:persian-modern-italic:mode=node;script=arab;language=FAR;" . . * 'sl/' with NFSS spec.: . <->"file:persian-modern-oblique:mode=node;script=arab;language=FAR;" . . * 'bold italic' with NFSS spec.: . <->"file:persian-modern-bolditalic:mode=node;script=arab;language=FAR;" . . * 'sl/' with NFSS spec.: . <->"file:persian-modern-boldoblique:mode=node;script=arab;language=FAR;" ................................................. luaotfload | load font: auto-selecting default features for script: arab ................................................. . fontspec info: "no-scripts" . . Font persian-modern-regular does not contain any OpenType `Script' . information. ................................................. ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-regular(1)' created for font . 'persian-modern-regular' with options . [Mapping=parsidigits,ExternalLocation,BoldFont={persian-modern-bold},BoldItal icFont={persian-modern-bolditalic},ItalicFont={persian-modern-italic},SlantedFo nt={persian-modern-oblique},BoldSlantedFont={persian-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"file:persian-modern-regular:mode=node;" . . * 'bold' with NFSS spec.: . <->"file:persian-modern-bold:mode=node;" . . * 'italic' with NFSS spec.: . <->"file:persian-modern-italic:mode=node;" . . * 'sl/' with NFSS spec.: . <->"file:persian-modern-oblique:mode=node;" . . * 'bold italic' with NFSS spec.: . <->"file:persian-modern-bolditalic:mode=node;" . . * 'sl/' with NFSS spec.: . <->"file:persian-modern-boldoblique:mode=node;" ................................................. Package xepersian-mathsdigitspec Info: DefiningthedefaultPersianmathsdigitsfont as'persian-modern-regular' on input line 77. ! LaTeX Error: Encoding scheme `EU1' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.77 ...dern-boldoblique}]{persian-modern-regular} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Encoding scheme `EU1' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.77 ...dern-boldoblique}]{persian-modern-regular} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Encoding scheme `EU1' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.77 ...dern-boldoblique}]{persian-modern-regular} Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Encoding scheme `EU1' unknown. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.77 ...dern-boldoblique}]{persian-modern-regular} Your command was ignored. Type I to replace it with another command, or to continue without it. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setlatintextfont with arg. spec. 'O{}m' on line . 86. ................................................. fontspec: script 'latn' exists in font 'LMRoman10-Regular' fontspec: script 'latn' exists in font 'LMRoman10-Regular' ************************************************* * fontspec warning: "no-mapping-ligtex" * * Input mapping not (yet?) supported in LuaTeX. * Use "Ligatures=TeX" instead of "Mapping=tex-text". ************************************************* \g_fontspec_family_lmroman10-regular_int=\count397 (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-lmromancaps10-regular.lua)(load: C:/Documents and Se ttings/Administrator/.texlive2012/texmf-var/luatex-cache/generic/fonts/otf/temp -lmroman10-bolditalic.lua)(load: C:/Documents and Settings/Administrator/.texli ve2012/texmf-var/luatex-cache/generic/fonts/otf/temp-lmromanslant10-bold.lua) ................................................. . fontspec info: "defining-font" . . Font family 'lmroman10-regular(0)' created for font 'lmroman10-regular' with . options . [Mapping=tex-text,ExternalLocation,BoldFont={lmroman10-bold},BoldItalicFont={ lmroman10-bolditalic},ItalicFont={lmroman10-italic},SmallCapsFont={lmromancaps1 0-regular},SlantedFont={lmromanslant10-regular},BoldSlantedFont={lmromanslant10 -bold}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . . <->"file:lmroman10-regular:mode=node;script=latn;language=DFLT;+tlig;+trep;" . . * 'small caps' with NFSS spec.: . . <->"file:lmromancaps10-regular:mode=node;script=latn;language=DFLT;+tlig;+tre p;" . . * 'bold' with NFSS spec.: . <->"file:lmroman10-bold:mode=node;script=latn;language=DFLT;+tlig;+trep;" . . * 'bold small caps' with NFSS spec.: . . <->"file:lmromancaps10-regular:mode=node;script=latn;language=DFLT;+tlig;+tre p;" . . * 'italic' with NFSS spec.: . <->"file:lmroman10-italic:mode=node;script=latn;language=DFLT;+tlig;+trep;" . . * 'italic small caps' with NFSS spec.: . . <->"file:lmromancaps10-regular:mode=node;script=latn;language=DFLT;+tlig;+tre p;" . . * 'sl/' with NFSS spec.: . . <->"file:lmromanslant10-regular:mode=node;script=latn;language=DFLT;+tlig;+tr ep;" . . * 'small caps' with NFSS spec.: . . <->"file:lmromancaps10-regular:mode=node;script=latn;language=DFLT;+tlig;+tre p;" . . * 'bold italic' with NFSS spec.: . . <->"file:lmroman10-bolditalic:mode=node;script=latn;language=DFLT;+tlig;+trep ;" . . * 'bold italic small caps' with NFSS spec.: . . <->"file:lmromancaps10-regular:mode=node;script=latn;language=DFLT;+tlig;+tre p;" . . * 'sl/' with NFSS spec.: . . <->"file:lmromanslant10-bold:mode=node;script=latn;language=DFLT;+tlig;+trep; " . . * 'bold small caps' with NFSS spec.: . . <->"file:lmromancaps10-regular:mode=node;script=latn;language=DFLT;+tlig;+tre p;" ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \defpersianfont with arg. spec. 'mO{}m' on line . 98. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \deflatinfont with arg. spec. 'mO{}m' on line 107. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpersiansansfont with arg. spec. 'O{}m' on line . 141. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpersianmonofont with arg. spec. 'O{}m' on line . 145. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setnavarfont with arg. spec. 'O{}m' on line 149. ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setpookfont with arg. spec. 'O{}m' on line 153. ................................................. (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-outline.lua) fontspec: script 'arab' exists in font 'PersianModern-Outline' fontspec: language 'FAR' for script 'arab' exists in font 'PersianModern-Outlin e' ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* \g_fontspec_family_persian-modern-outline_int=\count398 ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-italicoutline.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-obliqueoutline.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-outline(0)' created for font . 'persian-modern-outline' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,ItalicFont= {persian-modern-italicoutline},SlantedFont={persian-modern-obliqueoutline}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"file:persian-modern-outline:mode=node;script=arab;language=FAR;" . . * 'italic' with NFSS spec.: . <->"file:persian-modern-italicoutline:mode=node;script=arab;language=FAR;" . . * 'sl/' with NFSS spec.: . <->"file:persian-modern-obliqueoutline:mode=node;script=arab;language=FAR;" ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setsayehfont with arg. spec. 'O{}m' on line 158. ................................................. (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-shadow.lua) fontspec: script 'arab' exists in font 'PersianModern-Shadow' fontspec: language 'FAR' for script 'arab' exists in font 'PersianModern-Shadow ' ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* \g_fontspec_family_persian-modern-shadow_int=\count399 ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-italicshadow.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* (load: C:/Documents and Settings/Administrator/.texlive2012/texmf-var/luatex-ca che/generic/fonts/otf/temp-persian-modern-obliqueshadow.lua) ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-shadow(0)' created for font . 'persian-modern-shadow' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,ItalicFont= {persian-modern-italicshadow},SlantedFont={persian-modern-obliqueshadow}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"file:persian-modern-shadow:mode=node;script=arab;language=FAR;" . . * 'italic' with NFSS spec.: . <->"file:persian-modern-italicshadow:mode=node;script=arab;language=FAR;" . . * 'sl/' with NFSS spec.: . <->"file:persian-modern-obliqueshadow:mode=node;script=arab;language=FAR;" ................................................. ................................................. . LaTeX info: "xparse/define-command" . . Defining document command \setiranicfont with arg. spec. 'O{}m' on line 163. ................................................. fontspec: script 'arab' exists in font 'PersianModern-Oblique' fontspec: language 'FAR' for script 'arab' exists in font 'PersianModern-Obliqu e' ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* \g_fontspec_family_persian-modern-oblique_int=\count400 ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ************************************************* * fontspec warning: "no-mapping" * * Input mapping not (yet?) supported in LuaTeX. ************************************************* ................................................. . fontspec info: "defining-font" . . Font family 'persian-modern-oblique(0)' created for font . 'persian-modern-oblique' with options . [Script=Parsi,Language=Parsi,Mapping=parsidigits,ExternalLocation,BoldFont={p ersian-modern-boldoblique}]. . . This font family consists of the following shapes: . . * 'normal' with NFSS spec.: . <->"file:persian-modern-oblique:mode=node;script=arab;language=FAR;" . . * 'bold' with NFSS spec.: . <->"file:persian-modern-boldoblique:mode=node;script=arab;language=FAR;" ................................................. (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/loadingorder-bidi-xepersian.d ef File: loadingorder-bidi-xepersian.def 2012/01/01 v0.3 making sure that xepersia n is the last package loaded ) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/footnote-bidi-xepersian.def File: footnote-bidi-xepersian.def 2010/07/25 v0.2 footnote macros for xepersian package ) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/framed-bidi-xepersian.def File: framed-bidi-xepersian.def 2012/06/05 v0.1 xepersian adaptations for frame d package for XeTeX engine ) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/hyperref-xepersian.def File: hyperref-xepersian.def 2010/07/25 v0.3 bilingual captions for hyperref pa ckage ) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/book-xepersian.def File: book-xepersian.def 2010/07/25 v0.2 adaptations for standard book class ) (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/localise-xepersian.def File: localise-xepersian.def 2010/07/25 v0.2a Persian localisation of LaTeX2e (c:/texlive/2011/texmf-dist/tex/xelatex/xepersian/commands-ltx.def File: commands-ltx.def 2010/07/25 v0.2 Persian localisation of LaTeX2e commands ! Undefined control sequence. \ifprimitive l.16 \eqcommand{شمع‌جدول}{@arstrut} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.16 \eqcommand{شمع‌جدول}{@arstrut} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.16 \eqcommand{شمع‌جدول}{@arstrut} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package amsmath Warning: Foreign command \above; (amsmath) \frac or \genfrac should be used instead (amsmath) on input line 17. ! Missing $ inserted. $ l.17 \eqcommand{فوق}{above} I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. LaTeX Font Info: Try loading font information for U+msa on input line 17. (c:/texlive/2011/texmf-dist/tex/latex/amsfonts/umsa.fd File: umsa.fd 2009/06/22 v3.00 AMS symbols A ) LaTeX Font Info: Try loading font information for U+msb on input line 17. (c:/texlive/2011/texmf-dist/tex/latex/amsfonts/umsb.fd File: umsb.fd 2009/06/22 v3.00 AMS symbols B ) ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCharDef #1#2#3#4->\XeTeXmathchardef #1="\mathchar@type #2 \csname sy... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCharDef #1#2#3#4->\XeTeXmathchardef #1="\mathchar@type #2 \csname sy... l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \decimalseparator l.17 \eqcommand{فوق}{above} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.17 \eqcommand{فوق}{above} I'm ignoring this; it doesn't match any \if. ! Missing number, treated as zero. { l.17 \eqcommand{فوق}{above} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.17 \eqcommand{فوق}{above} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \ifprimitive l.18 ...ای‌نمایش}{abovedisplayshortskip} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \edef l.18 ...ای‌نمایش}{abovedisplayshortskip} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). \edef l.18 ...ای‌نمایش}{abovedisplayshortskip} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \ifprimitive l.19 ...بالای‌نمایش}{abovedisplayskip} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.19 ...بالای‌نمایش}{abovedisplayskip} I'm ignoring this; it doesn't match any \if. ! Missing number, treated as zero. { l.19 ...بالای‌نمایش}{abovedisplayskip} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Illegal unit of measure (pt inserted). { l.19 ...بالای‌نمایش}{abovedisplayskip} Dimensions can be in units of em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one! I'll assume that you meant to say pt, for printer's points. To recover gracefully from this error, it's best to delete the erroneous units; e.g., type `2' to delete two letters. (See Chapter 27 of The TeXbook.) ! Undefined control sequence. \ifprimitive l.20 ...and{عنوان‌چکیده}{abstractname} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.20 ...and{عنوان‌چکیده}{abstractname} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.20 ...and{عنوان‌چکیده}{abstractname} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.21 \eqcommand{اکسنت}{accent} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Please use \mathaccent for accents in math mode. \accent l.21 \eqcommand{اکسنت}{accent} I'm changing \accent to \mathaccent here; wish me luck. (Accents are not the same in formulas as they are in text.) ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.21 \eqcommand{اکسنت}{accent} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.21 \eqcommand{اکسنت}{accent} I'm ignoring this; it doesn't match any \if. ! Missing number, treated as zero. { l.21 \eqcommand{اکسنت}{accent} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. \ifprimitive l.22 \eqcommand{فعال}{active} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.22 \eqcommand{فعال}{active} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.22 \eqcommand{فعال}{active} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.23 ...یفزاسطرفهرست}{addcontentsline} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Argument of \@firstoftwo has an extra }. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Runaway argument? ! Paragraph ended before \@firstoftwo was complete. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. ! Missing \endcsname inserted. \par l.23 ...یفزاسطرفهرست}{addcontentsline} The control sequence marked should not appear between \csname and \endcsname. ! Missing number, treated as zero. \toclevel@ l.23 ...یفزاسطرفهرست}{addcontentsline} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing = inserted for \ifnum. \toclevel@ l.23 ...یفزاسطرفهرست}{addcontentsline} I was expecting to see `<', `=', or `>'. Didn't. ! Missing number, treated as zero. \toclevel@ l.23 ...یفزاسطرفهرست}{addcontentsline} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing $ inserted. $ l.23 ...یفزاسطرفهرست}{addcontentsline} I've inserted a begin-math/end-math symbol since I think you left one out. Proceed, with fingers crossed. ! Missing \endgroup inserted. \endgroup l.23 ...یفزاسطرفهرست}{addcontentsline} I've inserted something that you may have forgotten. (See the above.) With luck, this will get me unwedged. But if you really didn't forget anything, try typing `2' now; then my insertion and my current dilemma will both disappear. Missing character: There is no ٪ (U+066A) in font cmr7! Missing character: There is no ٪ (U+066A) in font cmr7! ! LaTeX Error: Missing \begin{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.23 ...یفزاسطرفهرست}{addcontentsline} You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. ! Missing number, treated as zero. \relax l.23 ...یفزاسطرفهرست}{addcontentsline} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Too many }'s. \addcontentsline ...begingroup \def \Hy@tempa {#3} \@onelevel@sanitize \Hy@te... l.23 ...یفزاسطرفهرست}{addcontentsline} You've closed more groups than you opened. Such booboos are generally harmless, so keep going. ! Argument of \@firstoftwo has an extra }. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Runaway argument? ! Paragraph ended before \@firstoftwo was complete. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. ! Missing \endcsname inserted. \par l.23 ...یفزاسطرفهرست}{addcontentsline} The control sequence marked should not appear between \csname and \endcsname. ! You can't use `\par' after \the. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I'm forgetting what you said and using zero instead. ! Undefined control sequence. ... }\MessageBreak toclevel {\Hy@toclevel }\MessageBreak type {\expa... l.23 ...یفزاسطرفهرست}{addcontentsline} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Package hyperref Info: bookmark on input line 23: (hyperref) thecounter {0} (hyperref) text {} (hyperref) reference {Doc-Start} (hyperref) toclevel {} (hyperref) type {}. ! Extra \endgroup. \addcontentsline ...sageBreak type {#1}}\endgroup \fi \addtocontents {#1}{\p... l.23 ...یفزاسطرفهرست}{addcontentsline} Things are pretty mixed up, but I think the worst is over. ! Argument of \@firstoftwo has an extra }. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Runaway argument? ! Paragraph ended before \@firstoftwo was complete. \par l.23 ...یفزاسطرفهرست}{addcontentsline} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. ! Extra \else. ...\contentsline {\@firstoftwo }{\else }{\thepage }{\@currentHref }} l.23 ...یفزاسطرفهرست}{addcontentsline} I'm ignoring this; it doesn't match any \if. ! Extra \endgroup. \addcontentsline ...e }{\@currentHref }}\endgroup l.23 ...یفزاسطرفهرست}{addcontentsline} Things are pretty mixed up, but I think the worst is over. ! Extra \fi. \if@bidi@csprimitive ...ndafter \@secondoftwo \fi l.23 ...یفزاسطرفهرست}{addcontentsline} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.24 ...d{اضافه‌برجریمه}{addpenalty} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.24 ...d{اضافه‌برجریمه}{addpenalty} Try typing to proceed. If that doesn't work, type X to quit. ! Extra \else. \else l.24 ...d{اضافه‌برجریمه}{addpenalty} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \اضافه‌برجریمه already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.24 ...d{اضافه‌برجریمه}{addpenalty} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.25 \eqcommand{نشانی}{address} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.25 \eqcommand{نشانی}{address} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.25 \eqcommand{نشانی}{address} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.26 ...یفزابه‌فهرست}{addtocontents} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Argument of \@firstoftwo has an extra }. \par l.26 ...یفزابه‌فهرست}{addtocontents} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Runaway argument? ! Paragraph ended before \@firstoftwo was complete. \par l.26 ...یفزابه‌فهرست}{addtocontents} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.26 ...یفزابه‌فهرست}{addtocontents} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \if@bidi@csprimitive ...ndafter \@secondoftwo \fi l.26 ...یفزابه‌فهرست}{addtocontents} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.27 ...افه‌برشمارنده}{addtocounter} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: No counter '' defined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.27 ...افه‌برشمارنده}{addtocounter} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.27 ...افه‌برشمارنده}{addtocounter} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \if@bidi@csprimitive ...ndafter \@secondoftwo \fi l.27 ...افه‌برشمارنده}{addtocounter} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.28 ...mand{اضافه‌بربعد}{addtolength} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! You can't use `blank space ' after \advance. l.28 ...mand{اضافه‌بربعد}{addtolength} I'm forgetting what you said and not changing anything. ! Extra \fi. \if@bidi@csprimitive ...ndafter \@secondoftwo \fi l.28 ...mand{اضافه‌بربعد}{addtolength} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.29 ...ommand{بیفزافضای‌و}{addvspace} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! LaTeX Error: Something's wrong--perhaps a missing \item. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.29 ...ommand{بیفزافضای‌و}{addvspace} Try typing to proceed. If that doesn't work, type X to quit. ! Extra \else. \else l.29 ...ommand{بیفزافضای‌و}{addvspace} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \بیفزافضای‌و already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.29 ...ommand{بیفزافضای‌و}{addvspace} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.30 ...{تنظیم‌بدنمایی}{adjdemerits} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.30 ...{تنظیم‌بدنمایی}{adjdemerits} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.30 ...{تنظیم‌بدنمایی}{adjdemerits} I'm ignoring this; it doesn't match any \if. ! Missing number, treated as zero. { l.30 ...{تنظیم‌بدنمایی}{adjdemerits} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. \ifprimitive l.31 \eqcommand{بیفزابر}{advance} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.31 \eqcommand{بیفزابر}{advance} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.31 \eqcommand{بیفزابر}{advance} I'm ignoring this; it doesn't match any \if. ! You can't use `begin-group character {' after \advance. { l.31 \eqcommand{بیفزابر}{advance} I'm forgetting what you said and not changing anything. ! Too many }'s. \eqcommand ...imitive {#2}{\bidi@csletcs {#1}{#2}} {\bidi@csdefcs {#1}{#2}} l.31 \eqcommand{بیفزابر}{advance} You've closed more groups than you opened. Such booboos are generally harmless, so keep going. ! LaTeX Error: Command \بیفزابر already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.31 \eqcommand{بیفزابر}{advance} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.32 ...d{بعدازانتساب}{afterassignment} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \else l.32 ...d{بعدازانتساب}{afterassignment} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \بعدازانتساب already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.32 ...d{بعدازانتساب}{afterassignment} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.33 \eqcommand{بعدازگروه}{aftergroup} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \else l.33 \eqcommand{بعدازگروه}{aftergroup} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \بعدازگروه already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.33 \eqcommand{بعدازگروه}{aftergroup} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.34 \eqcommand{الف}{aleph} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.34 \eqcommand{الف}{aleph} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.34 \eqcommand{الف}{aleph} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.35 ...ه‌مستعارقلم}{aliasfontfeature} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ************************************************* * fontspec warning: "rename-feature-not-exist" * * The feature doesn't appear to be defined. ************************************************* ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.35 ...ه‌مستعارقلم}{aliasfontfeature} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \if@bidi@csprimitive ...ndafter \@secondoftwo \fi l.35 ...ه‌مستعارقلم}{aliasfontfeature} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.36 ...ستعارقلم}{aliasfontfeatureoption} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. ...oot_tl fontspec/\expandafter /\else l.36 ...ستعارقلم}{aliasfontfeatureoption} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \انتخاب‌خصیصه‌مستعارقلم already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.36 ...ستعارقلم}{aliasfontfeatureoption} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.37 \eqcommand{شکستنی}{allowbreak} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.37 \eqcommand{شکستنی}{allowbreak} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.37 \eqcommand{شکستنی}{allowbreak} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.38 \eqcommand{تخصی@}{alloc@} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \global l.38 \eqcommand{تخصی@}{alloc@} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Extra \fi. \if@bidi@csprimitive ...ndafter \@secondoftwo \fi l.38 \eqcommand{تخصی@}{alloc@} I'm ignoring this; it doesn't match any \if. ! You can't use a prefix with `begin-group character {'. { l.38 \eqcommand{تخصی@}{alloc@} I'll pretend you didn't say \long or \outer or \global or \protected. ! Undefined control sequence. \ifprimitive l.39 ...تخصیص‌یافته}{allocationnumber} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.39 ...تخصیص‌یافته}{allocationnumber} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.39 ...تخصیص‌یافته}{allocationnumber} I'm ignoring this; it doesn't match any \if. ! Missing number, treated as zero. { l.39 ...تخصیص‌یافته}{allocationnumber} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Undefined control sequence. \ifprimitive l.40 ...نمایش‌مجاز}{allowdisplaybreaks} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.40 ...نمایش‌مجاز}{allowdisplaybreaks} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.40 ...نمایش‌مجاز}{allowdisplaybreaks} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.41 \eqcommand{حروف‌بزرگ}{Alph} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \c@ l.41 \eqcommand{حروف‌بزرگ}{Alph} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing = inserted for \ifnum. \c@ l.41 \eqcommand{حروف‌بزرگ}{Alph} I was expecting to see `<', `=', or `>'. Didn't. ! Missing number, treated as zero. \c@ l.41 \eqcommand{حروف‌بزرگ}{Alph} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) Package XePersian Warning: Illegal value (\c@ ) for abjad numeral. ! Extra \else. \else l.41 \eqcommand{حروف‌بزرگ}{Alph} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \حروف‌بزرگ already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.41 \eqcommand{حروف‌بزرگ}{Alph} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.42 \eqcommand{حروف‌کوچک}{alph} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Missing number, treated as zero. \c@ l.42 \eqcommand{حروف‌کوچک}{alph} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) ! Missing = inserted for \ifnum. \c@ l.42 \eqcommand{حروف‌کوچک}{alph} I was expecting to see `<', `=', or `>'. Didn't. ! Missing number, treated as zero. \c@ l.42 \eqcommand{حروف‌کوچک}{alph} A number should have been here; I inserted `0'. (If you can't figure out why I needed to see a number, look up `weird error' in the index to The TeXbook.) Package XePersian Warning: Illegal value (\c@ ) for abjad numeral. ! Extra \else. \else l.42 \eqcommand{حروف‌کوچک}{alph} I'm ignoring this; it doesn't match any \if. ! LaTeX Error: Command \حروف‌کوچک already defined. Or name \end... illegal, see p.192 of the manual. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.42 \eqcommand{حروف‌کوچک}{alph} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Undefined control sequence. \ifprimitive l.43 \eqcommand{نام‌همچنین}{alsoname} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Extra \else. \if@bidi@csprimitive ...dafter \@firstoftwo \else \expandafter \@secondoftwo... l.43 \eqcommand{نام‌همچنین}{alsoname} I'm ignoring this; it doesn't match any \if. ! Extra \fi. \fi l.43 \eqcommand{نام‌همچنین}{alsoname} I'm ignoring this; it doesn't match any \if. ! Undefined control sequence. \ifprimitive l.44 \eqcommand{و}{and} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Misplaced \crcr. \endtabular ->\crcr \egroup \egroup $\egroup l.44 \eqcommand{و}{and} I can't figure out why you would want to use a tab mark or \cr or \span just now. If something like a right brace up above has ended a previous alignment prematurely, you're probably due for more error messages, and you might try typing `S' now just to see what is salvageable. ! Too many }'s. \endtabular ->\crcr \egroup \egroup $\egroup l.44 \eqcommand{و}{and} You've closed more groups than you opened. Such booboos are generally harmless, so keep going. ! Too many }'s. \endtabular ->\crcr \egroup \egroup $\egroup l.44 \eqcommand{و}{and} You've closed more groups than you opened. Such booboos are generally harmless, so keep going. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.44 \eqcommand{و}{and} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.44 \eqcommand{و}{and} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.44 \eqcommand{و}{and} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.44 \eqcommand{و}{and} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \SetMathCode #1#2#3#4->\XeTeXmathcode #1="\mathchar@type #2 \csname sym#3\en... l.44 \eqcommand{و}{and} (That makes 100 errors; please try again.) Here is how much of LuaTeX's memory you used: 23257 strings out of 494982 125201,662416 words of node,token memory allocated 1817 words of node memory still in use: 24 hlist, 3 vlist, 3 rule, 2 math, 36 glue, 5 kern, 2 penalty, 28 noad, 28 m ath_char, 120 glyph, 43 attribute, 45 glue_spec, 43 attribute_list, 2 temp, 2 i f_stack, 4 write, 2 local_par, 2 dir nodes avail lists: 1:3,2:8,3:73,4:38,5:1,7:1 25965 multiletter control sequences out of 65536+200000 69 fonts using 3044455 bytes 59i,3n,48p,3310b,175s stack positions out of 5000i,500n,10000p,200000b,50000s ! ==> Fatal error occurred, no output PDF file produced!